| Content |
Product type
Wireless Microphone System Accessories
Transmission frequency range
584-607 MHz
Antenna connector
fixed to housing
Frequency response
60 - 16.000 Hz
Transmission optimization
Pilot tone
Total Harmonic Distortion (THD)
< 1 %
Audio output, balanced
XLR
Audio output, unbalanced
6.3 mm jack
Max. output level
- 10 dBu
Controls
ASC, Channel down, Channel up, Power, volume
Indicators
5-Segment Level Meter, Antenna A/B, channel number
Operating voltage
12 V DC - 18 V DC (300 mA), External Power Supply
Accessories (included)
Batteries, Power supply
Other features
IR frequency synchronisation
|
Designed for on-camera mounting, the FP5 Portable Receiver locates an open frequency at the touch of a button and instantly syncs the transmitter to the receiver frequency.
The battery-powered FP5 is lightweight and durable, featuring diversity antennas and output to either XLR or 1/8" connectors.
For use with FP Wireless and SLX Wireless.
FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
Power LED with low battery indicator
RF LED that indicates transmitter sync when illuminated
Receiver output level control that manages output to camera/mixer
Diversity antennas for consistent reception of signal transmission
TA3F cable output to either XLR or 1/8" connectors included
Camera shoe mount included
Rugged and lightweight Shure construction
Audio Output Type
TA3F
Configuration
Impedance balanced
Pin Assignments
1=ground, 2=hot, 3=cold
Maximum Audio Output Level (Ref. ±38 kHz deviation with 1 kHz tone)
–5 dBV (into 600 Ω load)
Impedance
200 Ω
Dimensions
108 mm x 64 mm x 19 mm (H x W x D)
Weight
81 g (3 oz.)
Housing
Molded polycarbonate case
Sensitivity
–108 dBm for 12 dB SINAD, typical
Power Requirements
LR6 AA batteries, 1.5 V
Battery Life
Up to 12 hours (alkaline)
Bandwidth
24 MHz
Compatible Systems
Up to 20, simultaneous
|
The wireless tuner WT-5805 is a PLL-synthesizer controlled double superheterodyne diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.
(*1) 0 dB = 1 V | Power Source | AC mains (supplied AC adapter must be used) | | Power Consumption | 200 mA (12 V DC) | | Receiving Frequency | 636 - 865 MHz(*2), UHF | | Channel Selectable | 64 selectable frequencies | | Receiving System | Double super-heterodyne | | Diversity System | Space diversity | | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | | Antenna Input | 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) | | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | | Squelch Sensitivity | 18 - 40 dBμV variable | | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | | Tone Frequency | 32.768 kHz | | Indicator | Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm | | Channel Check | Usable frequencies scanning | | S/N Ratio | 110 dB or more (A-weight, unbalanced output) | | Harmonic Distortion | 1 % or less (typical) | | Frequency Response | 100 Hz - 15 kHz, ±3 dB | | Operating Temperature | -10 ℃ to +50 ℃ | | Finish | Resin, black | | Dimensions | 210 (W) × 44 (H) × 205.1 (D) mm | | Weight | 700 g | | Accessory | AC adapter(*3) …1, Wireless antenna …2 | | Option | Mounting bracket kit: MB-WT3 (for rack mounting one WT-5805 unit)
MB-WT4 (for rack mounting two WT-5805 units) |
|
ER-1193
1 channel 193 Freq. PLL Receiver 822-846 MHz
2 Frequencies available:
790 - 814 MHz (Germany)
822 - 846 MHz
• 193 selectable UHF Frequencies.
• Available for 1 transmitter
• True diversity technology permits minimum dropouts in the RF link
• PLL synthesised technology for
multi-channels.
• Compact half-rack metal housing for
space saving
• "Lock-on" mode avoids accidental modification of frequency, sensitivity and power-off.
Frequency Preparation: PLL Synthesised Control
Carrier Freq. range: 600 MHz- 960 MHz
Frequency Stability: ±0.005%
S/N Ratio: >100 dB
Display: LCD
Display Contents: Frequency, Antenna A/B, Mute display, RF/AF Lever Meter, battery fuel gauge
Controls: Power On/Off, Frequency Up/down Frequency Scan, Audio Level
Audio Output Level: -12 dB
AF Output Impedance: 600 Ohm
Squelch: Pilot Tone & Noise Mute
Operation Voltage: 12-18 VDC, 500 mA
Output Connector: XRL Balanced/ 6,3 mm Unbalanced
Dimension: 211 x 152 x 40 mm (LxWxH) |
Δέκτης diversity 1 συχνότητας UHF (710-865mHz). Διαμόρφωση FM, εύρος 40-20kHz. Έξοδος MIC ή LINE level με XLR ή unbalanced jack 1/4. Κατάλληλος για όλους τους πομπούς της σειράς 40. |
The IR-500R Infrared Wireless Receiver is designed for use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or an electrical box.
| Power Source | 24 V DC (supplied from the IR-702T) | | Current Consumption | Max. 40 mA |
Infrared Detector
| Wavelength | 870 nm | | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Reception Angle | Vertical: 80゜ (up to 30゜ movable downward)
Horizontal: 80゜ (up to 30゜ movable left or right) | | Reception Area | Approx. 15 m (50 ft) in a space without any obstacles | | Connection Terminal | 75 Ω, BNC jack | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Filter section: Polycarbonate, optical cut filter
Base: ABS resin, off-white | | Dimensions | 70 (W) × 120 (H) × 72 (D) mm (2.76" × 4.72" × 2.83“) | | Weight | 220 g (0.49 lb) (unit only) |
|
Reviews
There are no reviews yet.