Content |
Receiver Specifications:
- Audio Output Level Max.: (Ref +/- 30kHz, 1 kHz)
- XLR (into 600 Ohms load): -12 dBV
- Jack (into 3000 Ohm load): -18 dBV
- Output Impedance:
- XLR: 200 Ohm
- Jack: 1 kilOhm
- XLR Output: Impedance balanced
- Pin 1: Ground
- Pin 2: (+)
- Pin 3: (-)
- Image Rejection: > 90 dB
- Dimensions (W x H x D): 23,5 x 4,4 x 11,8 cm
- Weight: 370 g
- Power Requirements: 12-185 Vdc 400 mA, external power supply
|
Multiple system configurations are available, with handheld vocal microphone/transmitters and UniPak® body-pack transmitters designed for use with lavalier, headworn and instrument microphones as well as electric guitars.
Two independent receivers in a single housing
996 selectable UHF channels per band and True Diversity reception for interference-resistant operation
Available in two frequency bands: 541.500 - 566.375 MHz (TV Channels 25 - 30) and 655.500 - 680.375 MHz (TV Channels 44 - 49)
IntelliScan™ feature automatically finds and sets best available frequencies on all linked receivers
On-board Ethernet interface for monitoring and controlling system parameters with included AEW Control Interface software
Advanced digital Tone Lock™ squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display
Dual Compander circuitry processes high and low frequencies separately for unmatched audio quality
1/4" external mute switch jack allows user to mute the system quickly and easily
AC pass-through allows daisy-chain AC hookup with included IEC jumper cables
Link and coordinate multiple receiver channels
High-visibility white-on-blue LCD information display
Metal full-rack receiver chassis with reinforced mounting ears and rear rack mount capability
All transmitters offer rugged, ergonomic metal bodies, programmable features, soft-touch controls, and 10 mW/35 mW switchable RF power
Backlit LCD displays on transmitters
Locking battery door on UniPak body-pack transmitter
All components store up to five preset configurations, with customized "names" if desired
|
The IR-520R Infrared Wireless Receiver is designed for exclusive use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or a microphone stand.
Power Source | 24 V DC (supplied from the IR-702T) | Current Consumption | Max. 30 mA |
Infrared Detector
Wavelength | 870 nm | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Reception Area | Approx. 15 m (50 ft) in a space without any obstacles | Connection Terminal | 75 Ω, BNC jack | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Filter section: Polycarbonate, optical cut filter | Dimensions | 84.5 (W) × 63.5 (H) × 32 (D) mm (3.33" × 2.5" × 1.26“) | Weight | 100 g (0.22 lb) (unit only) | Accessory | Stand mounting bracket …1, Bracket mounting screw …2 |
|
With LDs' WS100-X it is simple to use at least 8 systems simultaneously without interferences. All systems transmit in the frequency range of 838 to 865 MHz. According to the order 91/2005 of the German federal network agency, these frequencies have been approved for professional uses �" without additional charges or a registration in Germany. Otherwise the systems are identical to the common WS100 systems working at a frequency range of 790,850 MHz. - 813,800 MHz. For the use of more than 4 systems we always recommend our WS100AD antenna splitter and our WS100DA directional antennas.
- 160-channel true diversity receiver with detachable antennas
- Blue LCD display with RF and AF level, group, channel and frequency display
- Convenient channel setting and setup with infrared ASC system
- True diversity display
- Professional outputs (balanced XLR connector and unbalanced jack socket)
- Noise suppression (Squelch) control on the back
- Jack/jack cable included
- Optional 19" rack mount with antenna cable and socket connectors available (LD WS 100 RK)
- Optional 19" quadruple antenna divider (LD WS 100 AD) and antenna amplifier (LD WS 100 AB) available
Technical Specifications:
LDWS100RX:
Frequency Range: | 838 - 865 MHz | Switching bandwith: | 0.250 MHz | No. of channels: | 160 (10 groups of 16 CHN) | Sensitivity: | -93 dBm for 30 dB SINAD, typical | Image Rejection: | >60 dB | S/N Ratio: | >90dB | T.H.D: | 90dB A-weighted | Dimensions: | 45 mm H, 212 mm L,160 mm D | Weight: | 920 grams | Power Requirements: | 12-18 V dc at 300 mA, supplied by external power supply |
|
Hiding underneath the sturdy 19-inch metal housing of the stationary receiver is highly advanced professional transmission technology. As with all components of the 2000 series, with the EM 2000 you can use five windows of up to 75 MHz in the UHF range. 20 channel bands with up to 64 presets and 6 channel bands each with up to 64 user-programmable channels are available. Each transmitter can be synchronized quickly and easily using infrared. The transmitter can be connected to networks via its Ethernet socket and can be monitored and controlled remotely from the PC using the Sennheiser Wireless System Manager software. |
The wireless tuner WT-5805 is a PLL-synthesizer controlled double superheterodyne diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.
(*1) 0 dB = 1 V Power Source | AC mains (supplied AC adapter must be used) | Power Consumption | 200 mA (12 V DC) | Receiving Frequency | 636 - 865 MHz(*2), UHF | Channel Selectable | 64 selectable frequencies | Receiving System | Double super-heterodyne | Diversity System | Space diversity | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | Antenna Input | 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | Squelch Sensitivity | 18 - 40 dBμV variable | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | Tone Frequency | 32.768 kHz | Indicator | Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm | Channel Check | Usable frequencies scanning | S/N Ratio | 110 dB or more (A-weight, unbalanced output) | Harmonic Distortion | 1 % or less (typical) | Frequency Response | 100 Hz - 15 kHz, ±3 dB | Operating Temperature | -10 ℃ to +50 ℃ | Finish | Resin, black | Dimensions | 210 (W) × 44 (H) × 205.1 (D) mm | Weight | 700 g | Accessory | AC adapter(*3) …1, Wireless antenna …2 | Option | Mounting bracket kit: MB-WT3 (for rack mounting one WT-5805 unit)
MB-WT4 (for rack mounting two WT-5805 units) |
|
Reviews
There are no reviews yet.