| Content |
Receiver Specifications:
- Audio Output Level Max.: (Ref +/- 30kHz, 1 kHz)
- XLR (into 600 Ohms load): -12 dBV
- Jack (into 3000 Ohm load): -18 dBV
- Output Impedance:
- XLR: 200 Ohm
- Jack: 1 kilOhm
- XLR Output: Impedance balanced
- Pin 1: Ground
- Pin 2: (+)
- Pin 3: (-)
- Image Rejection: > 90 dB
- Dimensions (W x H x D): 23,5 x 4,4 x 11,8 cm
- Weight: 370 g
- Power Requirements: 12-185 Vdc 400 mA, external power supply
|
The wireless tuner WT-5800 is a PLL-synthesizer controlled double superheterodyne true diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.
(*1) 0 dB = 1 V | Power Source | AC mains (supplied AC adapter must be used) | | Power Consumption | 250 mA (12 V DC) | | Receiving Frequency | 636 - 865 MHz(*2), UHF | | Channel Selectable | 64 selectable frequencies | | Receiving System | Double super-heterodyne | | Diversity System | Space diversity (true diversity) | | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | | Antenna Input | 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) | | Antenna Output | 75 Ω, BNC (Gain 0 dB) | | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | | Squelch Sensitivity | 18 - 40 dBμV variable | | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | | Tone Frequency | 32.768 kHz | | Indicator | Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm | | Channel Check | Usable frequencies scanning | | S/N Ratio | 110 dB or more (A-weight, unbalanced output) | | Harmonic Distortion | 1 % or less (typical) | | Frequency Response | 100 Hz - 15 kHz, ±3 dB | | Operating Temperature | -10 ℃ to +50 ℃ | | Finish | Resin, black | | Dimensions | 210 (W) × 44 (H) × 205.1 (D) mm | | Weight | 700 g | | Accessory | AC adapter(*3) …1, Wireless antenna …2 | | Option | Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit)
MB-WT4 (for rack mounting two WT-5800 units) |
|
- Single fixed frequency
- All-metal case
- Multichannel capability for simultaneous use of up to seven channels (maximum number of channel depends on local frequency plans).
- High Definition Audio Performance technology ensures the legendary, realistic AKG sound and perfect audio transmission.
|
General Description
The most-trusted wireless monitoring system gets even better. With upgraded features, this bodypack receiver sets the standard by which all other monitoring systems will be judged. For example, the compact receiver features adaptive diversity for super-reliable reception. The headphone cable is utilized as a second antenna to banish audio dropouts. Operating the EK 300 IEM G3 is also easy due to its intuitive menu navigation and highly-visible backlit graphic display. A switchable Hi Boost and a multi-level limiter complete the package. After the performance, the entire bodypack receiver can simply be placed in an optional charging station to charge the optional rechargeable battery.
Features- Sturdy metal housing
- 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
- Enhanced frequency bank system with up to 16 compatible frequencies
- Adaptive diversity for high reception quality
- Pilot tone squelch for eliminating RF interference when transmitter is turned off
- Automatic frequency scan feature searches for available frequencies
- Enhanced AF frequency range
- Wireless synchronization of receiver parameter from transmitter
- User-friendly menu operation with more control options
- Illuminated graphic display
- Auto-Lock function avoids accidental changing of settings
- HDX compander for crystal-clear sound
- Receiver features battery indicatation in 4 steps
- HiBoost, adjustable limiter, stereo/focus mode, balance
- Contacts for recharging BA 2015 accupack directly in the receiver
- Wide range of accessories adapts the system to any requirement
Delivery Includes- 1 EK 300 IEM G3 diversity receiver
- 1 IE 4 earphones
- 2 AA-size batteries
- 1 user manual
|
The wireless tuner WT-5805 is a PLL-synthesizer controlled double superheterodyne diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.
(*1) 0 dB = 1 V | Power Source | AC mains (supplied AC adapter must be used) | | Power Consumption | 200 mA (12 V DC) | | Receiving Frequency | 636 - 865 MHz(*2), UHF | | Channel Selectable | 64 selectable frequencies | | Receiving System | Double super-heterodyne | | Diversity System | Space diversity | | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | | Antenna Input | 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) | | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | | Squelch Sensitivity | 18 - 40 dBμV variable | | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | | Tone Frequency | 32.768 kHz | | Indicator | Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm | | Channel Check | Usable frequencies scanning | | S/N Ratio | 110 dB or more (A-weight, unbalanced output) | | Harmonic Distortion | 1 % or less (typical) | | Frequency Response | 100 Hz - 15 kHz, ±3 dB | | Operating Temperature | -10 ℃ to +50 ℃ | | Finish | Resin, black | | Dimensions | 210 (W) × 44 (H) × 205.1 (D) mm | | Weight | 700 g | | Accessory | AC adapter(*3) …1, Wireless antenna …2 | | Option | Mounting bracket kit: MB-WT3 (for rack mounting one WT-5805 unit)
MB-WT4 (for rack mounting two WT-5805 units) |
|
The IR-702T is a 2-channel infrared wireless tuner employing a fixed frequency system. This tuner is combined with an infrared wireless microphone and an infrared wireless receiver to make up the infrared wireless microphone system. The infrared microphone system eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms.
(*1) 0 dB = 1 V | Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | | Power Consumption | 15 W or less | | Receiving Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Receiver Sensitivity | S/N ratio: 50 dB or more
(40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation) | | S/N Ratio | 61 dB or more (60 dBμV input, ±4.8 kHz deviation, A-weighted) | | Tone Squelch Frequency | 32.768 kHz | | Infrared Receiver Input | 75 Ω, BNC jack × 2 (Infrared wireless receiver's power source: 24 V DC,
220 mA max. in total of 2 terminals) | | Output | Channel A and B: -10 dB(*1) (±4.8 kHz deviation, at volume level max.),
600 Ω, electrical balanced, 3 pole phone jack.
Note: Channel A switchable to mixer output. | | Frequency Response | 100 Hz - 12 kHz | | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Case: ABS resin, black | | Dimensions | 210 (W) × 44 (H) × 210.9 (D) mm (8.27" × 1.73" × 8.3“) | | Weight | 630 g (1.39 lb) (unit only) | | Accessory | AC adapter(*2) …1, AC Power cord (2 m (6.56 ft))(*2) …1,
Cord with a phone plug (1 m (3.28 ft)) …1, Color label (6 colors) …1,
Rubber foot …4 | | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-700D
together) |
|
Reviews
There are no reviews yet.