LD Systems LDWSECO2R4 ECO 2 Series – Receiver 864.900 MHz

Receiver Specifications:

• Audio Output Level Max.: (Ref +/- 30kHz, 1 kHz)
  • XLR (into 600 Ohms load): -12 dBV
  • Jack (into 3000 Ohm load): -18 dBV
• Output Impedance:
  • XLR: 200 Ohm
  • Jack: 1 kilOhm
• XLR Output: Impedance balanced
  • Pin 1: Ground
  • Pin 2: (+)
  • Pin 3: (-)
• Image Rejection: > 90 dB
• Dimensions (W x H x D): 23,5 x 4,4 x 11,8 cm
• Weight: 370 g
• Power Requirements: 12-185 Vdc 400 mA, external power supply

The IR-520R Infrared Wireless Receiver is designed for exclusive use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or a microphone stand.

Designed for on-camera mounting, the FP5 Portable Receiver locates an open frequency at the touch of a button and instantly syncs the transmitter to the receiver frequency.

The battery-powered FP5 is lightweight and durable, featuring diversity antennas and output to either XLR or 1/8" connectors.

For use with FP Wireless and SLX Wireless.

FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

    Power LED with low battery indicator
    RF LED that indicates transmitter sync when illuminated
    Receiver output level control that manages output to camera/mixer
    Diversity antennas for consistent reception of signal transmission
    TA3F cable output to either XLR or 1/8" connectors included
    Camera shoe mount included
    Rugged and lightweight Shure construction



Audio Output Type
TA3F

Configuration
Impedance balanced

Pin Assignments
1=ground, 2=hot, 3=cold

Maximum Audio Output Level (Ref. ±38 kHz deviation with 1 kHz tone)
–5 dBV (into 600 Ω load)

Impedance
200 Ω

Dimensions
108 mm x 64 mm x 19 mm (H x W x D)

Weight
81 g (3 oz.)

Housing
Molded polycarbonate case

Sensitivity
–108 dBm for 12 dB SINAD, typical

Power Requirements   
LR6 AA batteries, 1.5 V

Battery Life
Up to 12 hours (alkaline)

Bandwidth
24 MHz

Compatible Systems
Up to 20, simultaneous

ER-1193 1 channel 193 Freq. PLL Receiver 822-846 MHz 2 Frequencies available:
790 - 814 MHz (Germany)
822 - 846 MHz

• 193 selectable UHF Frequencies.
• Available for 1 transmitter
• True diversity technology permits minimum dropouts in the RF link
• PLL synthesised technology for
multi-channels.
• Compact half-rack metal housing for
space saving
• "Lock-on" mode avoids accidental modification of frequency, sensitivity and power-off. Frequency Preparation: PLL Synthesised Control
Carrier Freq. range: 600 MHz- 960 MHz
Frequency Stability: ±0.005%
S/N Ratio: >100 dB
Display: LCD
Display Contents: Frequency, Antenna A/B, Mute display, RF/AF Lever Meter, battery fuel gauge
Controls: Power On/Off, Frequency Up/down Frequency Scan, Audio Level
Audio Output Level: -12 dB
AF Output Impedance: 600 Ohm
Squelch: Pilot Tone & Noise Mute
Operation Voltage: 12-18 VDC, 500 mA
Output Connector: XRL Balanced/ 6,3 mm Unbalanced
Dimension: 211 x 152 x 40 mm (LxWxH) 

Multiple system configurations are available, with handheld vocal microphone/transmitters and UniPak® body-pack transmitters designed for use with lavalier, headworn and instrument microphones as well as electric guitars.

Two independent receivers in a single housing

996 selectable UHF channels per band and True Diversity reception for interference-resistant operation

Available in two frequency bands:
541.500 - 566.375 MHz (TV Channels 25 - 30) and
655.500 - 680.375 MHz (TV Channels 44 - 49)

IntelliScan™ feature automatically finds and sets best available frequencies on all linked receivers

On-board Ethernet interface for monitoring and controlling system parameters with included AEW Control Interface software

Advanced digital Tone Lock™ squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display

Dual Compander circuitry processes high and low frequencies separately for unmatched audio quality

1/4" external mute switch jack allows user to mute the system quickly and easily

AC pass-through allows daisy-chain AC hookup with included IEC jumper cables

Link and coordinate multiple receiver channels

High-visibility white-on-blue LCD information display

Metal full-rack receiver chassis with reinforced mounting ears and rear rack mount capability

All transmitters offer rugged, ergonomic metal bodies, programmable features, soft-touch controls, and 10 mW/35 mW switchable RF power

Backlit LCD displays on transmitters

Locking battery door on UniPak body-pack transmitter

All components store up to five preset configurations, with customized "names" if desired

Wireless receiver module 6 frequencies for WA-1812, 1812C. Combined with WM-3210, 3220 hand, WM-3310 lapel, WM-3310H head