| Content |
User's manual [4,83 MB]
Battery disposal information [77,1 KB]
|
|
| Receiver Specifications: - Antenna Connector: 1/2 Wave 50
- Audio Frequency Range: 60 - 16.000 Hz
- Signal-to-Noise Ratio: > 100 dB
- Audio Output: XLR and Jack
- Audio Output Level (balanced): 250 mV
- Audio Output Level (unbalanced): 250 mV
- Controls: Volume, On/Off Switch
- Indicators: Power LED, AF LED & RF LED
- Power Supply: 12 ~ 18 V DC 300 mA
|
|
Designed for on-camera mounting, the FP5 Portable Receiver locates an open frequency at the touch of a button and instantly syncs the transmitter to the receiver frequency.
The battery-powered FP5 is lightweight and durable, featuring diversity antennas and output to either XLR or 1/8" connectors.
For use with FP Wireless and SLX Wireless.
FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
Power LED with low battery indicator
RF LED that indicates transmitter sync when illuminated
Receiver output level control that manages output to camera/mixer
Diversity antennas for consistent reception of signal transmission
TA3F cable output to either XLR or 1/8" connectors included
Camera shoe mount included
Rugged and lightweight Shure construction
Audio Output Type
TA3F
Configuration
Impedance balanced
Pin Assignments
1=ground, 2=hot, 3=cold
Maximum Audio Output Level (Ref. ±38 kHz deviation with 1 kHz tone)
–5 dBV (into 600 Ω load)
Impedance
200 Ω
Dimensions
108 mm x 64 mm x 19 mm (H x W x D)
Weight
81 g (3 oz.)
Housing
Molded polycarbonate case
Sensitivity
–108 dBm for 12 dB SINAD, typical
Power Requirements
LR6 AA batteries, 1.5 V
Battery Life
Up to 12 hours (alkaline)
Bandwidth
24 MHz
Compatible Systems
Up to 20, simultaneous
|
Wireless receiver module 6 frequencies for WA-1812, 1812C. Combined with WM-3210, 3220 hand, WM-3310 lapel, WM-3310H head |
- Single fixed frequency
- All-metal case
- Multichannel capability for simultaneous use of up to seven channels (maximum number of channel depends on local frequency plans).
- High Definition Audio Performance technology ensures the legendary, realistic AKG sound and perfect audio transmission.
|
The WT-5810 is a PLL-synthesizer controlled double superhetrodyne diversity tuner designed to be used with a UHF wireless system. It employs a compander noise reduction circuit to minimize the influence of ambient RF noise.
(*1) 0 dB = 1 V | Power Source | AC mains (supplied AC adapter must be used) | | Power Consumption | 130 mA (12 V DC) | | Receiving Frequency | 636 - 865 MHz(*2), UHF | | Channel Selectable | 16 channels | | Receiving System | Double super-heterodyne | | Diversity System | Space diversity | | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | | Antenna | Rod antenna | | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | | Squelch Sensitivity | 18 - 40 dBμV variable | | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | | Tone Frequency | 32.768 kHz | | Indicator | ANT A/B, Audio (peak), Battery alarm, Channel number | | Channel Check | Usable frequencies scanning | | S/N Ratio | 104 dB or more (A-weight, unbalanced output) | | Harmonic Distortion | 1% or less (typical) | | Frequency Response | 100 - 15,000 Hz, ±3 dB | | Operating Temperature | -10℃ to +50℃ | | Finish | Resin, black | | Dimensions | 206 (W) × 40.6 (H) × 152.7 (D) mm (excluding antenna) | | Weight | 590 g | | Accessory | AC adapter(*3) …1 |
|
The IR-520R Infrared Wireless Receiver is designed for exclusive use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or a microphone stand.
| Power Source | 24 V DC (supplied from the IR-702T) | | Current Consumption | Max. 30 mA |
Infrared Detector
| Wavelength | 870 nm | | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Reception Area | Approx. 15 m (50 ft) in a space without any obstacles | | Connection Terminal | 75 Ω, BNC jack | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Filter section: Polycarbonate, optical cut filter | | Dimensions | 84.5 (W) × 63.5 (H) × 32 (D) mm (3.33" × 2.5" × 1.26“) | | Weight | 100 g (0.22 lb) (unit only) | | Accessory | Stand mounting bracket …1, Bracket mounting screw …2 |
|
Reviews
There are no reviews yet.