Content | For acoustically challenging interiors where music and speech must be clearly understood, even in the rearmost rows, there is one solution - MAUI® i1.
This feature is achieved with nine 3" mid-range drivers, two 1" neodymium high-frequency drivers and a specially developed BEM-optimized Waveguide. This combination avoids unnecessary reflections on the floor and on ceilings by keeping the vertical dispersion as narrow as possible and the horizontal one as wide as possible.
Installers can easily integrate the MAUI® i1 in any constant-voltage audio system. This is made possible with an 8 Ohm / 70 V / 100 V selector switch. In addition, you can tap the power down to 60 W, 30 W, 15 W and 7.5 W depending on how many speakers you need to run in parallel and for a more efficient performance. At 8 Ohms, you can benefit from the best frequency response and highest 120 W RMS power rating.
For outdoor use, MAUI® i1 features weather treated cones, an aluminum loudspeaker grille and a weatherproof cover for the connection panel. That way, no water can enter the panel and your Loudspeaker stays rust free.
Surface installation is easy with the included U-bracket and with its black or white color selection, the loudspeaker blends unobtrusively and discreetly into almost any location.
The multiple award-winning MAUI® series has been expanded with the completely revised i1 and adapted to the special requirements of indoor and outdoor installations. All of this definitely makes MAUI® i1 the right choice for your demanding fixed installations.
Product type
Installation Loudspeakers
Type
Passive
Low/mid driver dimensions
9 x 3 "
Woofer size
76.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Horn
BEM optimized CD Horn
HF driver dimensions
2 x 1 "
HF Driver Size
25.4 mm
HF driver magnet
Neodymium
HF driver brand
Custom-made
Dispersion (H x V)
120° x 30
Load rating (RMS)
120 W
Peak power
480 W
Frequency response
130 - 19000 Hz
Crossover frequency
2500 Hz
SPL (1W/1m)
94 dB
Max. SPL
116 dB
Impedance
8 Ohm(s)
Input selector switch
70 V - 100V - 8 Ohms (transformer bypass)
100V Transformer power taps
60 - 30 - 15 - 7.5 W
70V Transformer power taps
60 - 30 - 15 - 7.5 W
Protection class IP
65
Loudspeaker inputs
1
Speaker input connections
4-pin Euro Terminal Block (Pitch - 5,08 mm)
Cabinet material
Aluminum
Cabinet construction
Closed
Width
85 mm
Height
985 mm
Depth
105 mm
Accessories (included)
U-Bracket for surface mount
Optional Accessories
Bracket for tilt installation applications
Weight
8,6 kg
|
F-2000 Series indoor speaker designed to provide high quality sound and reliable performance for restaurants, retail and audio/visual applications. Features include two-way bass-reflex design, high impact polystyrene enclosure with an 8" low frequency driver and dome tweeter. For challenging acoustic environments, users can easily reduce the high frequency dispersion of F-2000 models by simply installing an included horn adapter. Black, 70V.
Features:
- Compact box speakers for music and voice paging distribution
- Excellent sound quality
- Octagonal horn design for smooth coverage
- Adjustable high frequency dispersion
- Extruded cabinet design improves low frequency performance
- Individual protection circuit on each component
- Screwdriver-adjustable power taps
- Paintable grille and enclosure
- Wall/ceiling-mount bracket included
- Optional board, cluster and pole-mount brackets
- OmniMount-compatible (Series 20.5CA/WA)
- Optional subwoofers, model HB-1, FB-100 or FB-120
- Five year warranty
Specifications:
- LF Driver: 8” cone woofer
- HF Driver: 1” hard-dome tweeter
- Crossover: 2.5kHz
- Power Handling: 180W (cont. PGM), 60W (pink noise), 60W (70V transformer version)
- Sensitivity (1W, 1m): 93dB SPL
- Dispersion (adjustable):
110° H x 100 ° V
80° H x 80° V
|
- For Shower Room / Pool.
- Low Input BGM / FGM (in compliance with IP-X4).
- Splashproof 360° Rotatable 5W Full-Range Sealed 10cm Speaker for Rainy or High Humidity Areas.
Specification |
| Type | Sealed type | Speaker | 10cm dynamic speaker | Rated Power | 5W
Impedance 2k Ω (5W), 3.3k Ω (3W), 5k Ω (2W) | Output Sound Pressure Leve | 90dB / W / M | Frequency Response | 120 ~ 18,000Hz | Operating Temperature Range | -20 ~ +55°C | Speaker Component | 12cm dynamic cone type speaker | Finish | Enclosure; Polypropylene, Grey / Grill; Aluminium, Grey. | Dimensions | (W x H x D) 198 x 177 x 159mm | Weight | 1.4kg |
| Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.
Features:
- Frequency Response: 38 Hz - 20 kHz
- 100W continuous program (50W cont. pink, 200W cont.peak)
- 88 dB sensitivity (1W/1m)
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.
|
FEATURES
Compact box speakers for music and voice paging distribution
Excellent sound quality
Twelve new models:
Black or white
Indoor
Outdoor (IPX4)
Low impedance (8 ohm) or 70/100V versions
Octagonal horn design for smooth coverage
Adjustable high frequency dispersion (F-2000 models)
Extruded cabinet design improves low frequency performance
Individual protection circuit on each component
Screwdriver-adjustable power taps (70/100V models)
Paintable grille and enclosure
Wall/ceiling-mount bracket included
Optional board, cluster and pole-mount brackets
OmniMount-compatible (F-2000 models only, Series 20.5CA/WA)
Optional subwoofers, model HB-1, FB-100 or FB-120
Five year warranty
F-1300 Series
LF Driver: 5” cone woofer
HF Driver: 1” dome tweeter
Crossover: 2kHz
Power Handling: 150W (cont. PGM)
50W (pink noise)
30W (70V transformer version)
Sensitivity (1W, 1m): 90dB SPL
Dispersion: 110° H x 100 ° V
F-1300B (indoor, black, 8 ohm)
F-1300W (indoor, white, 8 ohm)
F-1300BT (indoor, black, 70V)
F-1300WT (indoor, white, 70V)
F-1300BTWP (outdoor, black, 70V)
F-1300WTWP (outdoor, white, 70V)
|
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white.
BS-634 |
| Speaker Component: | 5" (12cm) Cone-type | Impedance: | 100V LINE: 1.7 kΩ (6W), 3.3 kΩ (3W), | Sensitivity: | (1w 1m) 90dB | Frequency Responce: | 120 -20,000Hz | Input Terminal: | Push-in terminal | Finish: | Cabinet:HIPS resin, off white, paintable. Grille: SECC, off white, paintable | Dimensions: | 320(W)x200(H)x85(D)mm |
|
Reviews
There are no reviews yet.