LD SYSTEMS LDMAUII1 i1 Passive Indoor/Outdoor Installation Column Loudspeaker, 120 W/rms – 8Ω, Suitable for churches, speaker centers and many more, black

LD SYSTEMS MAUI i1 Passive Indoor/Outdoor Installation Column Loudspeaker, 120 W/rms - 8Ω, Suitable for churches, speaker centers and many more, black

ld_systems-LDMAUII1_8_instalation_outdoor_indoor_100v_70v_8ohm_face_open.jpg

All products by LD SYSTEMS

Call for Price

Compare Add to wishlist Submit Better Price

Availability: Available in 4-10 d.

SKU: LDMAUII1 Category: 100V Wallmount Loudspeaker

For acoustically challenging interiors where music and speech must be clearly understood, even in the rearmost rows, there is one solution – MAUI® i1. This feature is achieved with nine 3″ mid-range drivers, two 1″ neodymium high-frequency drivers and a specially developed BEM-optimized Waveguide. This combination avoids unnecessary reflections on the floor and on ceilings […]

For acoustically challenging interiors where music and speech must be clearly understood, even in the rearmost rows, there is one solution – MAUI® i1.

This feature is achieved with nine 3″ mid-range drivers, two 1″ neodymium high-frequency drivers and a specially developed BEM-optimized Waveguide. This combination avoids unnecessary reflections on the floor and on ceilings by keeping the vertical dispersion as narrow as possible and the horizontal one as wide as possible.

Installers can easily integrate the MAUI® i1 in any constant-voltage audio system. This is made possible with an 8 Ohm / 70 V / 100 V selector switch. In addition, you can tap the power down to 60 W, 30 W, 15 W and 7.5 W depending on how many speakers you need to run in parallel and for a more efficient performance. At 8 Ohms, you can benefit from the best frequency response and highest 120 W RMS power rating.

For outdoor use, MAUI® i1 features weather treated cones, an aluminum loudspeaker grille and a weatherproof cover for the connection panel. That way, no water can enter the panel and your Loudspeaker stays rust free.

Surface installation is easy with the included U-bracket and with its black or white color selection, the loudspeaker blends unobtrusively and discreetly into almost any location.

The multiple award-winning MAUI® series has been expanded with the completely revised i1 and adapted to the special requirements of indoor and outdoor installations. All of this definitely makes MAUI® i1 the right choice for your demanding fixed installations.

Product type
Installation Loudspeakers

Type
Passive

Low/mid driver dimensions
9 x 3 ”

Woofer size
76.2 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Horn
BEM optimized CD Horn

HF driver dimensions
2 x 1 ”

HF Driver Size
25.4 mm

HF driver magnet
Neodymium

HF driver brand
Custom-made

Dispersion (H x V)
120° x 30

Load rating (RMS)
120 W

Peak power
480 W

Frequency response
130 – 19000 Hz

Crossover frequency
2500 Hz

SPL (1W/1m)
94 dB

Max. SPL
116 dB

Impedance
8 Ohm(s)

Input selector switch
70 V – 100V – 8 Ohms (transformer bypass)

100V Transformer power taps
60 – 30 – 15 – 7.5 W

70V Transformer power taps
60 – 30 – 15 – 7.5 W

Protection class IP
65

Loudspeaker inputs
1

Speaker input connections
4-pin Euro Terminal Block (Pitch – 5,08 mm)

Cabinet material
Aluminum

Cabinet construction
Closed

Width
85 mm

Height
985 mm

Depth
105 mm

Accessories (included)
U-Bracket for surface mount

Optional Accessories
Bracket for tilt installation applications

Weight
8,6 kg

Weight	8.60 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDMAUII1 i1 Passive Indoor/Outdoor Installation Column Loudspeaker, 120 W/rms – 8Ω, Suitable for churches, speaker centers and many more, black”

Quick Comparison

LD SYSTEMS LDMAUII1 i1 Passive Indoor/Outdoor Installation Column Loudspeaker, 120 W/rms - 8Ω, Suitable for churches, speaker centers and many more, black remove TOA BS-634 Wall-Mount Speaker 6W,5' remove TOA BS-1034S 10W Wall-Mount Speaker remove JBL CONTROL 128WT In-Wall Loudspeaker, 6.5" 2-way with 100V Transformer remove TOA F-2000BT Speaker, 8" 2 Way, 60W/70V, Black remove JBL CONTROL 23T WHITE 3.5 inch, 2-way System with 70V/100V Transformer WHITE remove

Name LD SYSTEMS LDMAUII1 i1 Passive Indoor/Outdoor Installation Column Loudspeaker, 120 W/rms - 8Ω, Suitable for churches, speaker centers and many more, black remove TOA BS-634 Wall-Mount Speaker 6W,5' remove TOA BS-1034S 10W Wall-Mount Speaker remove JBL CONTROL 128WT In-Wall Loudspeaker, 6.5" 2-way with 100V Transformer remove TOA F-2000BT Speaker, 8" 2 Way, 60W/70V, Black remove JBL CONTROL 23T WHITE 3.5 inch, 2-way System with 70V/100V Transformer WHITE remove

Image

SKU LDMAUII1 BS-634 BS-1034S CONTROL 128WT F-2000BT CONTROL 23T WHITE

Rating

Price Call for Price €53.85 incl. GR VAT €61.07 incl. GR VAT €349.12 incl. GR VAT €175.00 incl. GR VAT €117.43 incl. GR VAT

Stock

Only 1 left in stock (can be backordered)

Available on backorder

In stock

Availability Only 1 left in stock (can be backordered) Available on backorder In stock In stock In stock In stock

Add to cart

Call for Price

Add to cart

Description

Content

For acoustically challenging interiors where music and speech must be clearly understood, even in the rearmost rows, there is one solution - MAUI® i1. This feature is achieved with nine 3" mid-range drivers, two 1" neodymium high-frequency drivers and a specially developed BEM-optimized Waveguide. This combination avoids unnecessary reflections on the floor and on ceilings by keeping the vertical dispersion as narrow as possible and the horizontal one as wide as possible. Installers can easily integrate the MAUI® i1 in any constant-voltage audio system. This is made possible with an 8 Ohm / 70 V / 100 V selector switch. In addition, you can tap the power down to 60 W, 30 W, 15 W and 7.5 W depending on how many speakers you need to run in parallel and for a more efficient performance. At 8 Ohms, you can benefit from the best frequency response and highest 120 W RMS power rating. For outdoor use, MAUI® i1 features weather treated cones, an aluminum loudspeaker grille and a weatherproof cover for the connection panel. That way, no water can enter the panel and your Loudspeaker stays rust free. Surface installation is easy with the included U-bracket and with its black or white color selection, the loudspeaker blends unobtrusively and discreetly into almost any location. The multiple award-winning MAUI® series has been expanded with the completely revised i1 and adapted to the special requirements of indoor and outdoor installations. All of this definitely makes MAUI® i1 the right choice for your demanding fixed installations. Product type Installation Loudspeakers

Type Passive

Low/mid driver dimensions 9 x 3 "

Woofer size 76.2 mm

Woofer magnet Ferrite

Woofer brand Custom-made

Horn BEM optimized CD Horn

HF driver dimensions 2 x 1 "

HF Driver Size 25.4 mm

HF driver magnet Neodymium

HF driver brand Custom-made

Dispersion (H x V) 120° x 30

Load rating (RMS) 120 W

Peak power 480 W

Frequency response 130 - 19000 Hz

Crossover frequency 2500 Hz

SPL (1W/1m) 94 dB

Max. SPL 116 dB

Impedance 8 Ohm(s)

Input selector switch 70 V - 100V - 8 Ohms (transformer bypass)

100V Transformer power taps 60 - 30 - 15 - 7.5 W

70V Transformer power taps 60 - 30 - 15 - 7.5 W

Protection class IP 65

Loudspeaker inputs 1

Speaker input connections 4-pin Euro Terminal Block (Pitch - 5,08 mm)

Cabinet material Aluminum

Cabinet construction Closed

Width 85 mm

Height 985 mm

Depth 105 mm

Accessories (included) U-Bracket for surface mount

Optional Accessories Bracket for tilt installation applications

Weight 8,6 kg

The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white.

BS-634
Speaker Component:	5" (12cm) Cone-type
Impedance:	100V LINE: 1.7 kΩ (6W), 3.3 kΩ (3W),
Sensitivity:	(1w 1m) 90dB
Frequency Responce:	120 -20,000Hz
Input Terminal:	Push-in terminal
Finish:	Cabinet:HIPS resin, off white, paintable. Grille: SECC, off white, paintable
Dimensions:	320(W)x200(H)x85(D)mm

The BS-1034 and BS-1034S are wall-mount speakers matched with a supplied plug-in speaker bracket, for easy installation. The BS-1034/1034S combine a low-frequency 5" (12cm) cone-type speaker and a high-frequency balanced dome-type speaker. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible. Enclosure and grille net colour is off-white, except on the BS-1034S, which comes with a silver net grille.

Speaker components:	5" (12cm) cone-type + Balanced dome tweeter.
Rated Input:	100V Line 10W
Impedance:	100V LINE: 1kΩ (10W),2kΩ (5W) 3.3kΩ (3W),10kΩ (1W)
Sensitivity:	(1W 1m)9odB
Frequency Responce:	120-20,000Hz
Input Terminal:	Push-in terminal
Finish:	Cabinet: HIPS resin, off white, paintable.Grill: SECC, metallic paint.BS-1034S is finished silver metallic paint

The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs. JBL Control 128W at a Glance:

30 Hz - 20 kHz frequency range.
120W continuous program (60W cont. pink, 240W cont. peak).
90 dB sensitivity (1W/1m).
High-slope crossover network produces natural sound and even coverage.
Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.

F-2000 Series indoor speaker designed to provide high quality sound and reliable performance for restaurants, retail and audio/visual applications. Features include two-way bass-reflex design, high impact polystyrene enclosure with an 8" low frequency driver and dome tweeter. For challenging acoustic environments, users can easily reduce the high frequency dispersion of F-2000 models by simply installing an included horn adapter. Black, 70V.

Features:

Compact box speakers for music and voice paging distribution
Excellent sound quality
Octagonal horn design for smooth coverage
Adjustable high frequency dispersion
Extruded cabinet design improves low frequency performance
Individual protection circuit on each component
Screwdriver-adjustable power taps
Paintable grille and enclosure
Wall/ceiling-mount bracket included
Optional board, cluster and pole-mount brackets
OmniMount-compatible (Series 20.5CA/WA)
Optional subwoofers, model HB-1, FB-100 or FB-120
Five year warranty

Specifications:

LF Driver: 8” cone woofer
HF Driver: 1” hard-dome tweeter
Crossover: 2.5kHz
Power Handling: 180W (cont. PGM), 60W (pink noise), 60W (70V transformer version)
Sensitivity (1W, 1m): 93dB SPL
Dispersion (adjustable):
110° H x 100 ° V
80° H x 80° V