LD SYSTEMS LDMAUII1W MAUI i1 Passive Indoor/Outdoor Installation Column Loudspeaker, 120 W/rms – 8Ω, Suitable for churches, speaker centers and many more, white

629.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
For acoustically challenging interiors where music and speech must be clearly understood, even in the rearmost rows, there is one solution – MAUI® i1. This feature is achieved with nine 3″ mid-range drivers, two 1″ neodymium high-frequency drivers and a specially developed BEM-optimized Waveguide. This combination avoids unnecessary reflections on the floor and on ceilings […]

 

Read more

For acoustically challenging interiors where music and speech must be clearly understood, even in the rearmost rows, there is one solution – MAUI® i1.

This feature is achieved with nine 3″ mid-range drivers, two 1″ neodymium high-frequency drivers and a specially developed BEM-optimized Waveguide. This combination avoids unnecessary reflections on the floor and on ceilings by keeping the vertical dispersion as narrow as possible and the horizontal one as wide as possible.

Installers can easily integrate the MAUI® i1 in any constant-voltage audio system. This is made possible with an 8 Ohm / 70 V / 100 V selector switch. In addition, you can tap the power down to 60 W, 30 W, 15 W and 7.5 W depending on how many speakers you need to run in parallel and for a more efficient performance. At 8 Ohms, you can benefit from the best frequency response and highest 120 W RMS power rating.

For outdoor use, MAUI® i1 features weather treated cones, an aluminum loudspeaker grille and a weatherproof cover for the connection panel. That way, no water can enter the panel and your Loudspeaker stays rust free.

Surface installation is easy with the included U-bracket and with its black or white color selection, the loudspeaker blends unobtrusively and discreetly into almost any location.

The multiple award-winning MAUI® series has been expanded with the completely revised i1 and adapted to the special requirements of indoor and outdoor installations. All of this definitely makes MAUI® i1 the right choice for your demanding fixed installations.

Product type
Installation Loudspeakers


Type
Passive


Low/mid driver dimensions
9 x 3 ”


Woofer size
76.2 mm


Woofer magnet
Ferrite


Woofer brand
Custom-made


Horn
BEM optimized CD Horn


HF driver dimensions
2 x 1 ”


HF Driver Size
25.4 mm


HF driver magnet
Neodymium


HF driver brand
Custom-made


Dispersion (H x V)
120° x 30


Load rating (RMS)
120 W


Peak power
480 W


Frequency response
130 – 19000 Hz


Crossover frequency
2500 Hz


SPL (1W/1m)
94 dB


Max. SPL
116 dB


Impedance
8 Ohm(s)


Input selector switch
70 V – 100V – 8 Ohms (transformer bypass)


100V Transformer power taps
60 – 30 – 15 – 7.5 W


70V Transformer power taps
60 – 30 – 15 – 7.5 W


Protection class IP
65


Loudspeaker inputs
1


Speaker input connections
4-pin Euro Terminal Block (Pitch – 5,08 mm)


Cabinet material
Aluminum


Cabinet construction
Closed


Width
85 mm


Height
985 mm


Depth
105 mm


Accessories (included)
U-Bracket for surface mount


Optional Accessories
Bracket for tilt installation applications


Weight
8,6 kg


Weight 8.60 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDMAUII1W MAUI i1 Passive Indoor/Outdoor Installation Column Loudspeaker, 120 W/rms – 8Ω, Suitable for churches, speaker centers and many more, white”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS LDMAUII1W MAUI i1 Passive Indoor/Outdoor Installation Column Loudspeaker, 120 W/rms - 8Ω, Suitable for churches, speaker centers and many more, white removeLD Systems MIX 6 G3 Passive 2-Way Slave Loudspeaker to LD Systems MIX 6 A G3 removeJBL CONTROL 25AV - Monitor Speaker 200W 5.25'' 2-way WHITE (price per item) removeLD Systems MIX 10 G3 Passive 2-Way Slave Loudspeaker for LD Systems MIX 10 A G3 removeRCF COMPACT M 06 Passive 2-Way 6" Loudspeaker 120x80° 100W Rms 116db Black removeRCF MR40 Passive Two-Way Speaker 4''+1'' 40W Rms, 108db Pair-White remove
NameLD SYSTEMS LDMAUII1W MAUI i1 Passive Indoor/Outdoor Installation Column Loudspeaker, 120 W/rms - 8Ω, Suitable for churches, speaker centers and many more, white removeLD Systems MIX 6 G3 Passive 2-Way Slave Loudspeaker to LD Systems MIX 6 A G3 removeJBL CONTROL 25AV - Monitor Speaker 200W 5.25'' 2-way WHITE (price per item) removeLD Systems MIX 10 G3 Passive 2-Way Slave Loudspeaker for LD Systems MIX 10 A G3 removeRCF COMPACT M 06 Passive 2-Way 6" Loudspeaker 120x80° 100W Rms 116db Black removeRCF MR40 Passive Two-Way Speaker 4''+1'' 40W Rms, 108db Pair-White remove
ImageLDMIX62G3_Passive-2-way-slave-loudspeaker-to-LD-systems-MIX-6-A-G3LDMIX102G3_LD-Systems_2-way_Passive-Loundspeakerrcf_compact_m_06rcf_mr40_w_passive
SKULDMAUII1WLDMIX62G3CONTROL 25AV WHITELDMIX102G3COMPACTM06MR40W
Rating
Price629.00 incl. GR VAT 150.65 incl. GR VAT 274.99 incl. GR VAT 292.94 incl. GR VAT248.00 incl. GR VAT189.21 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Passive 2-way loudspeaker
  • 280 watts peak power handling
  • Tight and punchy bass reflex design
  • 6.5” woofer and 1” HF driver, 80 Hz - 20 kHz
  • 2 pole mount inserts for vertical and horizontal orientation
  • Ideal as slave unit to LD Systems MIX 6 A G3
  • Passive 2-way loudspeaker
  • Ideal as a slave to MIX 10 A G3
  • 10” custom woofer and 1” Celestion HF driver
  • 200 watts RMS power handling
  • 121 dB maximum SPL
  • Rugged birch ply cabinet
  • Shock-resistant front grill provides maximum speaker protection
  • 36 mm dual-tilt pole receptacle for 0° or 5° orientation
  • 100 W RMS power handling
  • 116 dB max SPL
  • 60 ÷ 20000 Hz frequency range
  • 120° x 80° constant directivity coverage angle
  • 40 W (8 ohm) power handling
  • 108 dB max SPL
  • IP 55 protection grade
  • Colour black RAL 9005 and white RAL 9003
ContentFor acoustically challenging interiors where music and speech must be clearly understood, even in the rearmost rows, there is one solution - MAUI® i1. This feature is achieved with nine 3" mid-range drivers, two 1" neodymium high-frequency drivers and a specially developed BEM-optimized Waveguide. This combination avoids unnecessary reflections on the floor and on ceilings by keeping the vertical dispersion as narrow as possible and the horizontal one as wide as possible. Installers can easily integrate the MAUI® i1 in any constant-voltage audio system. This is made possible with an 8 Ohm / 70 V / 100 V selector switch. In addition, you can tap the power down to 60 W, 30 W, 15 W and 7.5 W depending on how many speakers you need to run in parallel and for a more efficient performance. At 8 Ohms, you can benefit from the best frequency response and highest 120 W RMS power rating. For outdoor use, MAUI® i1 features weather treated cones, an aluminum loudspeaker grille and a weatherproof cover for the connection panel. That way, no water can enter the panel and your Loudspeaker stays rust free. Surface installation is easy with the included U-bracket and with its black or white color selection, the loudspeaker blends unobtrusively and discreetly into almost any location. The multiple award-winning MAUI® series has been expanded with the completely revised i1 and adapted to the special requirements of indoor and outdoor installations. All of this definitely makes MAUI® i1 the right choice for your demanding fixed installations. Product type Installation Loudspeakers
Type Passive
Low/mid driver dimensions 9 x 3 "
Woofer size 76.2 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Horn BEM optimized CD Horn
HF driver dimensions 2 x 1 "
HF Driver Size 25.4 mm
HF driver magnet Neodymium
HF driver brand Custom-made
Dispersion (H x V) 120° x 30
Load rating (RMS) 120 W
Peak power 480 W
Frequency response 130 - 19000 Hz
Crossover frequency 2500 Hz
SPL (1W/1m) 94 dB
Max. SPL 116 dB
Impedance 8 Ohm(s)
Input selector switch 70 V - 100V - 8 Ohms (transformer bypass)
100V Transformer power taps 60 - 30 - 15 - 7.5 W
70V Transformer power taps 60 - 30 - 15 - 7.5 W
Protection class IP 65
Loudspeaker inputs 1
Speaker input connections 4-pin Euro Terminal Block (Pitch - 5,08 mm)
Cabinet material Aluminum
Cabinet construction Closed
Width 85 mm
Height 985 mm
Depth 105 mm
Accessories (included) U-Bracket for surface mount
Optional Accessories Bracket for tilt installation applications
Weight 8,6 kg

LD Systems MIX 6 G3

Passive 2-Way Slave Loudspeaker to LD Systems MIX 6 A G3

This passive 2-way loudspeaker has been designed as a companion to the active MIX 6 A G3 for small-scale PA and personal monitoring applications. It features the same 10" custom woofer and 1" HF driver complement, 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering crystal clear sound with punch and detail. The rigid MDF enclosure features two 16 mm pole mounts for horizontal or vertical orientation. In a master-and-slave setup with the active unit, the MIX 6 G3 provides amazing performance and versatility in a lightweight, easily portable package.  
Product type PA loudspeaker
Type passive
Low/mid driver dimensions 6.5 "
Woofer size 165.1 mm
Woofer brand Custom-made
HF driver dimensions 1 "
HF driver size 25.4 mm
HF driver brand Custom-made
Dispersion (H x V) 80 x 70 °
Load rating (RMS) 70 W
Peak power 280 W
Frequency response 80 - 20.000 Hz
SPL (1W/1m) 90 dB
Max. SPL 117 dB
Impedance 4 Ohm(s)
Protection circuits ICL (Intelligent Clip Limiting), over-current, overload, short circuit, thermal overload
Loudspeaker inputs 1
Speaker input connections 6.3 mm jack
Loudspeaker outputs 6.3 mm jack
Cabinet material MDF
Cabinet surface texture paint
Cabinet construction Bass Reflex
Width 214 mm
Height 323 mm
Depth 221 mm
Features 2 x 16 mm pole mount socket
Weight 4,4 kg
 

PRICE IS PER PIECE AND NOT PER PAIR!

  • 70 Hz to 23 kHz frequency range (-10 dB)
  • 200 watts continuous program power capacity
  • 87 dB sensitivity (1W/1m)
  • 100° x 100° nominal dispersion
  • 60W, 30W, 15W, 7.5W taps at 70V
  • 60W, 30W, 15W taps at 100V
  • 8 ohms bypass
  • 3 kHz crossover frequency
  • High-Impact Polystyrene (HIPS) enclosure
  • Video shielded for use near video monitors
  • Stainless steel grille for harsh environments
  • Zinc-plated screw down input terminal strip
  • Available in black or white (Control 25AV-WH)
  • Dimensions (HxWxD):  236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
  • Net Weight:  4.0 kg (9 lb)
 

LD Systems MIX 10 G3

Passive 2-Way Slave Loudspeaker for LD Systems MIX 10 A G3

This passive 2-way loudspeaker has been designed as a companion to the active MIX 10 A G3 for small-scale PA and personal monitoring applications. It features the same 10" custom woofer and 1" Celestion HF driver complement, 65 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering crystal clear sound with punch and detail. The compact bass reflex enclosure is constructed with tough birch plywood sporting a speakON-compatible input, 50° monitor angle and Dual-Tilt pole receptacle for 0° or 5° mounting angles. In a master-and-slave setup with the active unit , the MIX 10 G3 provides amazing performance and versatility in a lightweight, easily portable package.  
Product type PA loudspeaker
Type passive
Low/mid driver dimensions 10 "
Woofer size 254 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil 2 "
Woofer voice coil (mm) 50.8 mm
Horn CD horn
HF driver dimensions 1 "
HF driver size 25.4 mm
HF driver magnet Ferrite
HF driver brand Celestion
HF driver voice coil 1 "
HF driver voice coil 25.4 mm
Dispersion (H x V) 80 x 70 °
Load rating (RMS) 200 W
Peak power 400 W
Frequency response 65 - 20.000 Hz
SPL (1W/1m) 95 dB
Max. SPL 121 dB
Impedance 4 Ohm(s)
Protection circuits HF Driver
Loudspeaker inputs 1
Speaker input connections Speakon compatible
Cabinet material 16 mm Plywood
Cabinet surface PA painting
Cabinet construction Bass Reflex
Monitor angle 50 °
Width 315 mm
Height 489 mm
Depth 307 mm
Features dual-tilt flange (0°/5°), Ergonomic handle
Weight 10,8 kg
                       
  • 100 W RMS power handling
  • 116 dB max SPL
  • 60 ÷ 20000 Hz frequency range
  • 120° x 80° constant directivity coverage angle
  • 1 x 6" high power woofer
  • 1 x 1" voice coil neodymium dome tweeter
  • High quality plywood cabinet
  • Steel front grille with clothing
  • Installation points available on rear, top and bottom panels
  • 4 pole EUROBLOCK connector (audio input and parallel link output)
COMPACT M 06 is a multipurpose two-way full-range speaker system, suitable for a wide range of applications. Its balanced sound is a big asset in near-field applications for the best intelligibility. The M 06 features high sensitivity, typical of professional audio cabinets thanks to the use of oversized magnets and a HI-FI sound quality, with smooth and wide frequency response, thanks to the wave-guided neodymium dome tweeter. The SPL level of low-distortion audio the M 06 can provide goes far beyond expectations of such a compact solution. The elegant and compact design with accurate finishing makes M 06 suitable for almost any environment, even with architectural constraints. Optional mounting accessories allow using M 06 on wall or ceiling installations.  
Configuration Passive 2-Way
Enclosure Type Bass-Reflex Loudspeaker
Total Power Capacity 40 W RMS 160 W Peak
Constant Voltage / Transformer Taps None
System Impedance 8 Ohms
Drivers
HF Driver 1" / 25.4 mm Tweeter
HF Voice Coil 0.8" / 20.3 mm
MF Driver None
LF Driver 4" / 101.6 mm Woofer
LF Voice Coil 1" / 25.4 mm
Magnet Neodymium
Performance
Frequency Response 70 Hz to 20 kHz -10 dB
Maximum SPL 108 dB
Coverage Angle 110° H x 100° V
Directivity 7 (Directivity Index)
Speaker Sensitivity 86 dB
Protections Overcurrent, Ultrasonic
Connectivity
Audio I/O 2 x Euroblock Speaker Input/Output
Signal Processing
Crossover 3 kHz
Phase Adjustment None
Physical
Mounting 4 x M6 Bracket Point
Handles None
Construction Material Metal, Plastic
Dimensions 8.5 x 6.1 x 5.3" / 216 x 154 x 135 mm
Weight 2.2 kg
Weight8.60 kg4.8 kg4.00 kg11.2 kg5.5 kg2.5 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 8.60 kg
Weight 4.8 kg
Weight 4.00 kg
Weight 11.2 kg
Weight 5.5 kg
Weight 2.5 kg