| Content |
Fantastic laserburst effect using a 532nm 40mW green and 450nm 80mW blue laser
Thanks to special grating technology the beams are split-up in a lot of separate laser beams pointing in all directions to create an amazing, room filling effect.
Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc.
The color of the beams changes all the time using laser blanking technology.
Plug & play: no expensive controllers needed!
A multifunctional infrared remote can be used to control the functions
Standalone mode with built-in microphone or automatic shows can be selected.
All kinds of strobe effects
Adjustable mounting bracket (stand) and power adapter included.
Key actuated on/off switch for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
Mains Input: DC 12V / 600mA
Total Power consumption: 5,7W
Sound Control: Internal microphone
Laser Power: 40mW Green CW laser (λ = 532nm) + 80mW Blue CW laser (λ = 450nm)
Laser radiation class: 3B
Beam diameter @ aperture: less than 5mm
Divergence (each beam): less than 2 mrad
Divergence (total output): less than 160°
Working temperature: 10°C to 40°C
Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
Size: 117 x 92 x 46 mm
Weight: 0.35kg |
ILDA extension cable incl. screw lock 3 m
Product type
Laser Accessories
Connector 1
25-pin Sub-D male
Connector 2
25-pin Sub-D female
Colour
Black
Length
300 mm
Weight
0,24 kg
Features
incl. screw lock
|
Work LX 80G DMX Laser
LX 80G is a high performance features with 80 mW and high precision micro-step scan motors
controlled by high speed processor.
It can be controlled by DMX signal with 7 channels or autonomous through its pre-recorder programs
being able to synchronize more than one LX 80 G (up to 100 units)
The program can be operated with audio signal thanks to the built-in microphone. The effects capacity
is enormous with up to 200 available effects that allow a great combinations variety and the TTL ?blanking?
function, very useful in discotheque and club performances. It is also possible to control PAN/TILT
movements via DMX making a versatile set. The 80 mW REAL power diode is very effective, creating
a powerful beam.
Device: Green Laser.
> Laser Source: 30mW @ 532nm.
> Scan: High precission micro-step motors
precisi?n.
> Control: High capacity processor.
> Operating modes: DMX512, Autonomous, Audio.
> aster/Slave function con linking capacity up to 100 units.
> Effects: 200 effects.
> Supply: 220V AC 50Hz
> Dimensions (mm): 250 x 230 x 190
(L x W x H).
> Weight:3.8 kg.
|
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
Description - Produces 2 synchronized laser beams
- Generates dynamic 3 color laser shows, perfect for fixed and mobile installations.
- RGY (Red, Green, Yellow) Class 3B Laser
- o 650nm Red 150mW beam
- o 532nm Green 150mW beam
- o Mixed Yellow 300mW beam
- The color of the beams changes all the time using laser blanking technology.
- Several working modes:
- o DMX controlled, 1 or 9 channels
- o Stand-alone with built-in microphone
- o Stand-alone automatic mode
- Preprogrammed multi-color laser shows
- DMX-addressing with LED display
- Complies to EN/IEC 60825-1 for Laser Safety
Technical Information - Mains Input: AC 230V, 50Hz
- Fuse: 250V 1.5A slow blow (20mm glass)
- Sound Control: Internal microphone
- DMX connections: 3pin XLR male / female
- DMX channels: 1 or 9 channels
- DMX starting address: 001 à 255
- Laser Power: 150mW Green CW laser (λ = 532nm)
150mW Red CW laser (λ = 650nm) - Laser radiation class: 3B
- Laser Safety Standard: EN60825-1:1994 + A1:2002 + A2:2002
- Size: 26 x 30x 10cm
- Weight: 3,61kg
| 1000MW RGB Multi Color DMX Laser Lights 1W Full Color Laser Beam Animation Scan DJ Laser Projector Party Stage Decor lazer Light.
|
Reviews
There are no reviews yet.