| Content | Light, easy-to-wear, beige-coloured headset condenser microphone with 3-pin mini XLR connector
- Type: condenser
- Directional characteristic: cardioid
- Frequency response: 70–16,000 Hz
- Nominal impedance: 1.4 kOhm
Product type
Wireless Microphone System Accessories
Type
Headsets
Colour
beige
Frequency response
70 - 16.000 Hz
Directivity
Cardioid
Nominal impedance
1400 Ohm(s)
Max. SPL
125 dB
Phantom power requierements
5 V
Microphone input
Mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
Weight
0,2 kg |
Features:
Smallest, lightest, most comfortable microphone of its kind
User-friendly for new and experienced users alike
Excellent for singing and spoken word applications
Extremely popular in houses of worship, theater and broadcast settings
Almost invisible against many skin tones
Rugged, bendable boom assures a custom fit for every wearer
Hands-free, wireless-enabled microphone allows total freedom of movement
Exclusive snap-on cables in 1mm or 2mm diameter for field replacement or compatibility with various wireless systems
Highly resistant to sweat and moisture
High quality voice pickup - more consistent than any lavalier
Excellent rejection of surrounding noise
Reduces feedback in meeting rooms or houses of worship an average of 12dB compared to an omni lavalier
Omnidirectional microphone is virtually immune to wind and breath pops, even without a windscreen
|
High-quality permanently polarized condenser headmic with cardioid pick-up pattern for use with SK-5212 & SK-3063 transmitters.
| Τype: | Headset | | Series Compatibility: | 3000/5000 Series |
|
Shure WBH54B Black Headworn Condenser Microphone
WBH54B is a subminiature, electret condenser head worn microphone. It provides uncompromised
sound quality and reliability with minimal visibility in applications such as broadcast, theater, and touring.
Despite their small size, the condenser element delivers full, clear, and natural reproduction of speech
and vocals. The microphone features a durable, low-profile wire frame headband which is fully adjustable for
stability and comfort. A plastic carrying case protects the microphone and its accessories.
Features:
Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejection
Extended frequency response tailored for vocal performances
Able to handle extremely high sound pressure levels (SPL)
Snap-fit foam windscreens stay in place during intensive movement
Available with an in-line preamp or with a TA4F connector for wireless applications
Black finish
TA4F connector for wireless applications
|
Transducer Condenser
Polar Pattern Omnidirectional
Frequency Response 30Hz to 20kHz +/- 3dB
Dynamic Range (Typical) Not Specified by Manufacturer
Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level 130dB SPL
Power Requirements Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance 2k ohms
Output Connectors TA4-Female Connector for Shure Wireless Transmitters
Dimensions Not Specified by Manufacturer
Weight 0.07 oz (2g) |
General Specs:
|
Frequency Response:
| ..... | 20 - 20,000 Hz +/-3dB | |
Pick-Up Pattern:
| ..... | Omni-Directional | |
Nominal Impedance:
| ..... | 1000 Ohms at 1kHz | |
Min. Terminating Impedance:
| ..... | 4.7 K Ohms | |
Sensitivity:
| ..... | 2 mV / Pz | |
Diameter of Mic Capsule:
| ..... | 4.8mm | |
Max. SPL:
| ..... | 150 dB | |
Equivalent Noise Level:
| ..... | 28 dB (A) | |
Supply Current:
| ..... | 250uA | |
Power Supply:
| ..... | 4.5 - 15V | |
Cable Length:
| ..... |
1.6 m
| |
Diameter of Boom Arm:
| ..... | 1.1 mm | |
Weight of Boom Arm:
| ..... | 2.1 g | |
Connector:
| ..... | ew Connector | |
Weight Neckband:
| ..... | 4.4 g |
|
Reviews
There are no reviews yet.