LD SYSTEMS LDMON101A G2 Powered 2-way Co-axial stage monitor 150 W RMS

365.00 incl. GR VAT

Only 2 left in stock (can be backordered)

EAN: 4049521147210
Installments calculation
CompareAdd to wishlist Submit Better Price
The LDMON101A features a high end 10″ co-axial speaker with a 1″ compression driver and delivers 150 W RMS output power. The Volex power supply system allows a secure connection of further active monitors, this feature enables the installation of a big active stage monitor system while using only one power plug. The monitor also […]

 

Read more

The LDMON101A features a high end 10″ co-axial speaker with a 1″ compression driver and delivers 150 W RMS output power.

The Volex power supply system allows a secure connection of further active monitors, this feature enables the installation of a big active stage monitor system while using only one power plug. The monitor also features a softclip-limiter as well as a volume control.

The Housing was built out of a high quality plywood with a high resistance textured finish. The stabile front guard ideally protects the speakerbox. 

Specifications LDMON101A:

  • Model Name: LDMON101A
  • Type: Bass Reflex
  • Components:
    • Woofer / Compression Driver: 10″ / 1″ Coaxial Custom Made Speaker
    • Amplification: Class A / B
  • Dispersion: 75° x 75°
  • Power: 150 W RMS
  • Frequency Range: 90 Hz- 20 Khz
  • SPL (1 W / 1 m): 99 dB
  • Max. SPL: 121 dB
  • Protection: Limiter, Circuit and Overcurrent
  • Controls: Volume, On/Off Switch
  • Indicators: Signal, Power, Limit
  • Connectors:
    • Input: Line: XLR /6,3 mm jack (combo)
    • Output: Line: XLR
  • Power Supply: Transformer
  • Cabinet Material: 15 mm Plywood
  • Cabinet Surface: Painting
  • Dimensions: 360 x 370 x 425 mm
  • Features: Ergonomic milled handles, VOLEX power plug input / output
Weight 12.80 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDMON101A G2 Powered 2-way Co-axial stage monitor 150 W RMS”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS LDMON101A G2 Powered 2-way Co-axial stage monitor 150 W RMS removeRCF ST15-SMA ACTIVE STAGE MONITOR removeRCF NX M12-A 750W 12" ACTIVE TWO-WAY MONITOR 750W removeRCF HD-10A Active 2-way monitor removeRCF HD-12A Active 2-way MONITOR Digital system 12" + 1", 600Wrms removeRCF NX 12-SMA ACTIVE COAXIAL STAGE MONITOR 12"+1" remove
NameLD SYSTEMS LDMON101A G2 Powered 2-way Co-axial stage monitor 150 W RMS removeRCF ST15-SMA ACTIVE STAGE MONITOR removeRCF NX M12-A 750W 12" ACTIVE TWO-WAY MONITOR 750W removeRCF HD-10A Active 2-way monitor removeRCF HD-12A Active 2-way MONITOR Digital system 12" + 1", 600Wrms removeRCF NX 12-SMA ACTIVE COAXIAL STAGE MONITOR 12"+1" remove
Image
SKULDMON101AG213000462NXM12A130400031304001113000235
Rating
Price 365.00 incl. GR VAT1,119.00 incl. GR VAT 1,395.00 incl. GR VAT 515.70 incl. GR VAT716.00 incl. GR VAT1,478.00 incl. GR VAT
Stock

Only 2 left in stock (can be backordered)

In stock

Available on backorder

In stock

In stock

In stock

AvailabilityOnly 2 left in stock (can be backordered)In stockAvailable on backorderIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The LDMON101A features a high end 10" co-axial speaker with a 1" compression driver and delivers 150 W RMS output power.

The Volex power supply system allows a secure connection of further active monitors, this feature enables the installation of a big active stage monitor system while using only one power plug. The monitor also features a softclip-limiter as well as a volume control.

The Housing was built out of a high quality plywood with a high resistance textured finish. The stabile front guard ideally protects the speakerbox. 

Specifications LDMON101A:
  • Model Name: LDMON101A
  • Type: Bass Reflex
  • Components:
    • Woofer / Compression Driver: 10" / 1" Coaxial Custom Made Speaker
    • Amplification: Class A / B
  • Dispersion: 75° x 75°
  • Power: 150 W RMS
  • Frequency Range: 90 Hz- 20 Khz
  • SPL (1 W / 1 m): 99 dB
  • Max. SPL: 121 dB
  • Protection: Limiter, Circuit and Overcurrent
  • Controls: Volume, On/Off Switch
  • Indicators: Signal, Power, Limit
  • Connectors:
    • Input: Line: XLR /6,3 mm jack (combo)
    • Output: Line: XLR
  • Power Supply: Transformer
  • Cabinet Material: 15 mm Plywood
  • Cabinet Surface: Painting
  • Dimensions: 360 x 370 x 425 mm
  • Features: Ergonomic milled handles, VOLEX power plug input / output

ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.

APPLICATIONS
  • • Main vocal stage monitor
  • • High-output drum or keyboard monitor
  • • Sidefill monitor for small- to medium-scale applications
  • • Rental companies
  • • Professional musicians

General Specs

1200 Watt Peak, 600 Watt RMS
131 dB max SPL
45 Hz - 20 kHz frequency response
15" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil

Acoustical Specs

Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 131 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 15“, 2.5" voice coil

Inputs/Outputs

Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female

Processor Section

Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter

Amplifier Specifications

Total power: 1200 W PEAK
High frequencies: 400 W PEAK
Low frequencies: 800 W PEAK
Total power: 600 W RMS
High frequencies: 200 W RMS
Low frequencies: 400 W RMS

Cabinet Specs

Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black

Size/Weight

Height: 362/14.25 mm/inch
Width: 673/26.49 mm/inch
Depth: 473/18.62 mm/inch
Net Weight: 20.7/45.63 kg/lbs

The NX M12-A is a compact, lightweight two-way multipurpose loudspeaker system designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.

It is equipped with a new 750 Watt Digipro digital amplifier and premium transducers components.
The low frequency section is a 12” woofer with a 1.75” voice coil diaphragm while the high section is a neodymium compression driver mounted to a constant directivity horn.

Features
750 Watt Digipro digital amplifier
130 dB max spl
90 x 40, Wide dispersion constant directivity angle, rotatable horn
12" woofer, high power neodymium 3" voice coil
1" HF driver, titanium dome, neodymium 1.75" voice coil
PFC power factor correction

 

Acoustical Specifications
Frequency Response -3 dB:50 Hz÷ 20 kHz
Max SPL:130 dB 
Horizontal coverage angle:90° 
Vertical coverage angle:40° 
Compression Driver:1" neo, 1.75" v.c. 
Woofer:12" neo, 3" v.c. 
INPUT/OUTPUT SECTION
Input signal:ba l/ unbal 
Input connectors:Combo xlr-jack 
Output connectors:xlr 
Input sensitivity:-2 dBu / +4 dBu 
PROCESSOR SECTION
Crossover frequencies:1700 Hz 
Protections:Thermal, rms 
Limiter:Soft peak limiter 
Controls:Volume, side / floor, contour 
AMPLIFIER SPECIFICATIONS
Total power:750 Watts 
High frequencies:250 Watts 
Low frequencies:500 Watts 
Cooling:Convection / forced 
Connections:Powercon in / out 
CABINET
Cabinet Material:Balitc birch 
Hardware:6 x fly tracks 
Handles:2 side 
Pole Mount/Cap:Yes 
Colour:Black 
PHYSICAL SPECIFICATIONS
Height:646 / 25.43 mm/inch 
Width:385 / 15.15 mm/inch 
Depth:375 / 14.76 mm/inch 
Net Weight:21.2 / 46.73 Kg/Lbs

 

The HD 10-A, with an exceptional full range, is the optimum choice for live sound and installed situations.
Thanks to its deep bass punch, clean midrange output and accurate high frequencies, it offers the ultimate intelligibility in vocal and recorded music, from live sound to playback and from monitoring to fixed installation applications.

 

APPLICATIONS
  • • Live Sound
  • • Rental
  • • Portable PA
  • • Stage Monitoring
  • • Clubs

General Specs

1200 WATT PEAK, 600 WATT RMS
Digital Bi-amp
DSP Sound Processing
RCF Precision Transducers
SPL max. 129 dB

Acoustical Specs

Frequency Response -3 dB:50 Hz ÷ 20000 Hz
Max SPL:129 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Compression Driver:1“, 1.7" voice coil
Woofer:10“, 2.5" voice coil

Inputs/Outputs

Input signal:bal/unbal
Input connectors:Jack-XLR male
Output connectors:XLR female
Input sensitivity:-2 dBu / + 4 dBu

Processor Section

Crossover frequencies:1700 Hz
Protections:thermal, RMS
Limiter:Fast limiter
Controls:Volume, EQ shape, Mic/line

Amplifier Specifications

Total power:1200 W PEAK
High frequencies:300 W PEAK
Low frequencies:900 W PEAK
Total power:600 W RMS
High frequencies:150 W RMS
Low frequencies:450 W RMS
Connections:VDE AC socket

Cabinet Specs

Cabinet Material:Composite PP
Hardware:1 x M10 top, 1 x M10 bottom, 3 x M6 bottom
Handles:1 top, 1 side
Pole Mount/Cap:Yes
Grille:Steel
Colour:Black

Size/Weight

Height:527/20.74 mm/inch
Width:303/11.92 mm/inch
Depth:302.5/11.90 mm/inch
Net Weight:13.9/30.64 kg/lbs

The HD 12-A offers an extremely linear response and a precise, deep low frequency control. The 12” woofer guarantee a superior sound projection indoor and outdoor. It is the ideal speaker for main front of house in small PA systems, for high power monitoring and it is the best solution where higher power is required for various applications in larger venues.

APPLICATIONS
  • • Live Sound
  • • Rental
  • • Portable PA
  • • Stage Monitoring
  • • Clubs

General Specs

1200 WATT PEAK, 600 WATT RMS
Digital Bi-amp
DSP Sound Processing
RCF Precision Transducers
130 dB MAX SPL

Acoustical Specs

Frequency Response -3 dB:45 Hz ÷ 20000 Hz
Max SPL:130 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Compression Driver:1“, 1.7" voice coil
Woofer:12“, 2.5" voice coil

Inputs/Outputs

Input signal:bal/unbal
Input connectors:Jack-XLR male
Output connectors:XLR female
Input sensitivity:-2 dBu / + 4 dBu

Processor Section

Crossover frequencies:1600 Hz
Protections:thermal, RMS
Limiter:Fast limiter
Controls:Volume, EQ shape, Mic/line

Amplifier Specifications

Total power:1200 W PEAK
High frequencies:300 W PEAK
Low frequencies:900 W PEAK
Total power:600 W RMS
High frequencies:150 W RMS
Low frequencies:450 W RMS
Connections:VDE AC socket

Cabinet Specs

Cabinet Material:Composite PP
Hardware:1 x M10 top, 1 x M10 bottom, 3 x M6 bottom
Handles:1 top, 2 side
Pole Mount/Cap:Yes
Grille:Steel
Colour:Black

Size/Weight

Height:647/25.47 mm/inch
Width:380/14.96 mm/inch
Depth:380/14.96 mm/inch
Net Weight:18.3/40.34 kg/lbs

The NX 12-SMA is equipped with new high power 700 W digital amplifier and a newly designed 12” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system.
The NX 12-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:
- Floor, for stage monitoring;
- Free Field, for the use of the speakers as a stand-alone PA system.
Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker

APPLICATIONS
  • • Main vocal stage monitor
  • • High-output drum or keyboard monitor
  • • Main PA in small venues

General Specs

  • 1400 Watt Peak, 700 Watt RMS digital bi-amplification
  • 129 dB max spl
  • 60° x 60° constant directivity horn
  • 12" High power neodymium woofer, 2.5" voice coil
  • 1.7 kapton dome, 1" exit, neodymium high frequency driver
  • DSP processing, floor - fre field equalization, soft limiter and protection
  • Combo xlr/jack input, xlr signal output

Acoustical Specs

  • Frequency Response -3 dB:50Hz ÷ 20000 Hz
  • Max SPL:129dB
  • Horizontal coverage angle:60°
  • Vertical coverage angle:60°
  • Compression Driver:1.7 kapton dome, 1" exit, neodymium
  • Woofer:12" neo high power woofer, 2.5" voice coil

Processor Section

  • Limiter:Soft Limiter
  • Controls:Freefield, floor

Amplifier Specifications

  • Total power:1400W PEAK
  • High frequencies:400 W PEAK
  • Low frequencies:1000 W PEAK
  • Total power:700W RMS
  • High frequencies:200 W RMS
  • Low frequencies:500 W RMS

Cabinet Specs

  • Cabinet Material:Baltic Birch
  • Handles:1 on side
  • Pole Mount/Cap:yes
  • Grille:steel

Size/Weight

  • Height:324/12.7mm/inch
  • Width:550/21.6mm/inch
  • Depth:417/16.4mm/inch
  • Net Weight:16,5/36.3kg/lbs
Weight12.80 kg20.70 kg25.00 kg13.00 kg18.30 kg16.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 12.80 kg
Weight 20.70 kg
Weight 25.00 kg
Weight 13.00 kg
Weight 18.30 kg
Weight 16.50 kg