The DJ500 is a powerful, full-featured Class AB power amplifier with an output of 250W per channel 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations. The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front […]
The DJ500 is a powerful, full-featured Class AB power amplifier with an output of 250W per channel 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations.
The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front panel and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit.
The DJ500 functions in the entire frequency range of 20Hz – 20kHz with extremely high dependability, dynamics, and impulse fidelity.
Type: 2-channel
Output Power 1 KHz @ 4 ohms: 2 x 250 W
Output Power 1 KHz @ 8 ohms: 2 x 150 W
Output Power 1 KHz @ Bridge 8 ohms: 500 W
Output Circuity: Class A/B
Frequency Range: 20 – 20.000 Hz
THD: 0,05%
Voltage Gain: 30dB
Input Sensivity: 0,85V
Protection: Soft start, short circuit, DC, Temperature, over current
The DJ500 is a powerful, full-featured Class AB power amplifier with an output of 250W per channel 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations.
The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front panel and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit.
The DJ500 functions in the entire frequency range of 20Hz - 20kHz with extremely high dependability, dynamics, and impulse fidelity.
Type: 2-channel
Output Power 1 KHz @ 4 ohms: 2 x 250 W
Output Power 1 KHz @ 8 ohms: 2 x 150 W
Output Power 1 KHz @ Bridge 8 ohms: 500 W
Output Circuity: Class A/B
Frequency Range: 20 - 20.000 Hz
THD: 0,05%
Voltage Gain: 30dB
Input Sensivity: 0,85V
Protection: Soft start, short circuit, DC, Temperature, over current
Connectors Speaker Output: 2 x Speakon compatible, 2 x binding post
Cooling System: Fan
Power Supply: 230V / 50-60 Hz
Dimensions (W x H x D): 483 x 88 x 298 mm
InterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm bridge 1200W/4ohm 10-83kHz
high pass filter 30Ηz & 50Ηz
BASIC Series - Intelligent Power
BASIC - that's meeting the tightest budgets and professional requirements in reliability, flexibility and sound. Alone or in combination with the other products of the Bittner portfolio. The consequent realisation of the Bittner quality standards indicates once more our understanding of the contracting business. It underlines our philosophy that cost consciousness has nothing to do with giving up standards. Compromise is a word unknown to Bittner Audio! The incorporation of detent potentiometers, clip limiter, protection circuits for any imaginable situation, as well as a first-class production process using only highest-quality components made the BASIC series the choice of most contractors.
Certainly more than basic!
High Tech SMT design Excellent sound and superior impulse response Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay XLR Inputs Speakon and Binding Posts Clip Limiter Toroidal transformers LED Indicators for SIGNAL, CLIP, PROTECT, POWER Temperature controlled, variable speed, low noise fans Detent potentiometers Stereo / Bridged / Parallel Mode Ground Lift Robust Steel Chassis 3 Year Warranty
TECHNICAL DATA: Basic 800: 2x 400 W @ 4 Ohm Class: AB Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB) THD: < 0.03% Signal-to-Noise Ratio: < -102 dB Channel Seperation: > 85 dB Input Sensitivity: +6 dBu Input Clipping: 22 dBu Input Impedance: 20 kOhm Damping Factor: > 400 @ 4 Ohm Cooling: 2x Fan (temp. reg. variable speed) Weight: 13 kg. Dimensions : 2 RU/483x89x265 mm (19" x 3.5" x 12.6“)
Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
Rack mount stereo powered monitor speaker system
New AES/EBU digital input
lndependent MUTE function
Sophisticated control panel section
Ideal where space is at a premium
RM-2 is the ideal solution for monitoring needs in various space-challenged environments such as machine rooms, VTR monitoring, surveillance, mobile and stationary control rooms, theme park applications where audio monitoring is needed and the room for installation is not enough. Adding these new feature sets, RM-2 is now more versatile to various applications.
Stereo analog balanced +4DBu inputs with combo connectors (XLR & 1/4" plug).
AES/EBU digital input with XLR connector working with fs 44.1kHz to 96kHz.
Sophisticated control panel section including 26-dot stereo LED meter, biaxial stereo gain control, phone jack, Channel select switch as well as Input select switch.
Independent MUTE function by holding down CH SEL key for a while.
Auto Mute when powering on*.
D-class power amplifier (10W x 2) for clear sound reproduction and light weight construction.
Multi-voltage power supply.
Speaker Section
Unit: 110 x 40mm cone type, magnetically shielded, x 2
Impedance: 8 ohms
Output SPL: 84 dB/W (1m)
Frequency response: 200Hz to 20kHz
Amplifier Section
Rated output power: 10W or more (8 ohms, 1kHz)
Residual noise: -60 dBV or less (DIN AUDIO)
Distortion: 0.5% or less (10W / 4 ohms, 1kHz)
Digital input
Connector: XLR-3-31 type
Digital input Format: IEC60958 (AES/EBU)
Digital inputSampling frequency: 44.1kHz to 96 kHz
Analog input
Connector: XLR / 1/4" combi-jack
Analog input Nominal input level +4dBu (XLR), -10 DdBV (1/4“)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
<br>THD: < 0.03%<br>Signal-to-Noise Ratio: < -102 dB<br>Channel Seperation: > 85 dB<br>Input Sensitivity: +6 dBu<br>Input Clipping: 22 dBu<br>Input Impedance: 20 kOhm<br>Damping Factor: > 400 @ 4 Ohm<br>Cooling: 2x Fan (temp. reg. variable speed)<br>Weight: 10 kg.<br>Dimensions : 2 RU/483x89x265 mm (19 "acrobat_reader_logo."){kind=logo}
Reviews
There are no reviews yet.