LD Systems LDDJ500 Power Amplifier 2 x 250 W 4 Ohm

Discontinued

319.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The DJ500 is a powerful, full-featured Class AB power amplifier with an output of 250W per channel 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations. The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front […]

 

Read more

The DJ500 is a powerful, full-featured Class AB power amplifier with an output of 250W per channel 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations.

The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front panel and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ500 functions in the entire frequency range of 20Hz – 20kHz with extremely high dependability, dynamics, and impulse fidelity.

  • Type: 2-channel
  • Output Power 1 KHz @ 4 ohms: 2 x 250 W
  • Output Power 1 KHz @ 8 ohms: 2 x 150 W
  • Output Power 1 KHz @ Bridge 8 ohms: 500 W
  • Output Circuity: Class A/B
  • Frequency Range: 20 – 20.000 Hz
  • THD: 0,05%
  • Voltage Gain: 30dB
  • Input Sensivity: 0,85V
  • Protection: Soft start, short circuit, DC, Temperature, over current
  • Controls:ON/ OFF, Volume, Mode (Bridge/ Stereo), Ground-Lift
  • Indicators: Power, Clip, Protect
  • Connectors Line Input: 2 x XLR, 2 x 6,3mm jack
  • Connectors Speaker Output: 2 x Speakon compatible, 2 x binding post
  • Cooling System: Fan
  • Power Supply: 230V / 50-60 Hz
  • Dimensions (W x H x D): 483 x 88 x 298 mm
Weight 7.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDDJ500 Power Amplifier 2 x 250 W 4 Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDDJ500 Power Amplifier 2 x 250 W 4 Ohm removeInterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm removeINTERM R-150 PLUS AMPLIFIER 2X75W removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω removeBEHRINGER EP2000 EUROPOWER STEREO AMPLIFIER 2x350W 8Ω 2x500W 4Ω removeINTERM R-300 PLUS Power Amplifier remove
NameLD Systems LDDJ500 Power Amplifier 2 x 250 W 4 Ohm removeInterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm removeINTERM R-150 PLUS AMPLIFIER 2X75W removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω removeBEHRINGER EP2000 EUROPOWER STEREO AMPLIFIER 2x350W 8Ω 2x500W 4Ω removeINTERM R-300 PLUS Power Amplifier remove
Image
SKULDDJ500V-1000R-150 PLUSE009302E005275R-300 PLUS
Rating
Price 319.00 incl. GR VAT 330.26 incl. GR VAT 459.00 incl. GR VAT 754.00 incl. GR VAT 434.00 incl. GR VAT 571.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe DJ500 is a powerful, full-featured Class AB power amplifier with an output of 250W per channel 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations. The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front panel and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit. The DJ500 functions in the entire frequency range of 20Hz - 20kHz with extremely high dependability, dynamics, and impulse fidelity.
  • Type: 2-channel
  • Output Power 1 KHz @ 4 ohms: 2 x 250 W
  • Output Power 1 KHz @ 8 ohms: 2 x 150 W
  • Output Power 1 KHz @ Bridge 8 ohms: 500 W
  • Output Circuity: Class A/B
  • Frequency Range: 20 - 20.000 Hz
  • THD: 0,05%
  • Voltage Gain: 30dB
  • Input Sensivity: 0,85V
  • Protection: Soft start, short circuit, DC, Temperature, over current
  • Controls:ON/ OFF, Volume, Mode (Bridge/ Stereo), Ground-Lift
  • Indicators: Power, Clip, Protect
  • Connectors Line Input: 2 x XLR, 2 x 6,3mm jack
  • Connectors Speaker Output: 2 x Speakon compatible, 2 x binding post
  • Cooling System: Fan
  • Power Supply: 230V / 50-60 Hz
  • Dimensions (W x H x D): 483 x 88 x 298 mm

InterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm bridge 1200W/4ohm 10-83kHz

high pass filter 30Ηz & 50Ηz

Power Output Level R-150 PLUS

STEREO
8ohm(T.H.D 0.05%)  50W+50W
4ohm(T.H.D 0.05%)  75W+75W

BRIDGED MONO
8ohm(T.H.D 0.05%)  50W
8ohm(T.H.D 0.5%)  170W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10kΩ@0.775V Inputs


Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

acrobat_reader_logo.

  • Professional speaker connectors and "touch-proof” binding posts support most speaker wiring systems
  • Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies
  • Independent limiters per channel offer reliable protection against overload and distortion
  • High-current toroidal transformer for ultra-high transient response and absolute reliability
  • Ultra-reliable Toshiba/Fairchild power transistors
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
  • “Back-to-front” ventilation system including air filter for reliable operation
  • “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
  • Reference Quality Power Amplifier [R-300 Plus]

    • Controls :
      Front : Power on/off switch, attenuator, LED indicator
      Rear : Mode seletor switch, Stereo/bridged mono switch
    • Connectors :
      Input : 1 XLR, 1/4" balanced per channel
      Output : 5-way binding post and SpeakonTM per channel
    • Indicators :
      Power : Green, Protection : Red, Clip : Red, Signal : Green
    • Power Source : 100-120VAC or 220-240VAC; 50/60Hz
      (supplied AC mains transformer depends on country requirements)
    • Power Consumption : 250W(2.4A)
    • Weight : 8.4kg/18.5lb
    • Dimensions (WxHxD) : 482x88x317mm/19x3.5x12.5in
    Weight7.00 kg10.30 kg7.20 kg12.60 kg16.00 kg8.40 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 7.00 kg
    Weight 10.30 kg
    Weight 7.20 kg
    Weight 12.60 kg
    Weight 16.00 kg
    Weight 8.40 kg