JB Systems K 52 Passive Speaker 50W RMS

Description

• Full range speaker cabinet with modern look
• Perfect for home cinema systems and all kinds of background music applications like restaurants, bars, department stores, public places, meeting rooms, ...
• IP43 protection: can be used for outdoor applications.
• Integrated mounting bracket can be rotated over 90°
• Uses two waterproof 5'' woofers and one 1'' dome tweeter in between

• Frequency Response: 60-20.000Hz
• Power: 50Wrms (80W max)
• Impedance: 8 ohm
• Dimensions (mm): 415 x 191 x 258 (329 with bracket)
• Weight: 4,8kg

PRICE IS PER PIECE AND NOT PER PAIR

• 70 Hz to 23 kHz frequency range (-10 dB)
• 200 watts continuous program power capacity
• 87 dB sensitivity (1W/1m)
• 100° x 100° nominal dispersion
• 60W, 30W, 15W, 7.5W taps at 70V
• 60W, 30W, 15W taps at 100V
• 8 ohms bypass
• 3 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Video shielded for use near video monitors
• Stainless steel grille for harsh environments
• Zinc-plated screw down input terminal strip
• Available in black or white (Control 25AV-WH)
• Dimensions (HxWxD):  236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
• Net Weight:  4.0 kg (9 lb)

Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility

Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)

• Weatherproof 2-way bass-reflex 100V/70V constant voltage loudspeaker system.
• Drip-proof 13cm cone woofer with 90mm magnetic circuit and 3cm film diaphragm dome tweeter with 70mm magnetic circuit.
• High 30W rated input power and 91 dB output sound pressure level.
• Durable, acoustically efficient polypropylene enclosure.
• Optional wall/under-eaves mounting bracket.

SR-H3S Line Array Loudspeaker; Bass-reflex type; Continuous program: 360W; Sensitivity: 92dB; Directivity: Horizontal: 90°, Vertical: 20°

Specifications SR-H3S
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360W
Rated Impedance 8Ω
Sensitivity (1W,1m equivalent measured at 4m) 92dB
Frequency Response 90 – 17,000Hz (when using optional Digital processor)
Directivity Angle Horizontal: 90°, Vertical: 20° (within the range of speaker height)
Speaker Component 7cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish 
Enclosure MDF, white, urethane paint
Front grille Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1177.2 (H) × 17 (D)mm (3.31" x 46.35" x 6.18“)
Weight 7.9kg (17.42 lb)
Option Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket: SR-FB3, Speaker stand adapter: SR-SA3, Speaker stand: ST-33B, Matching transformer: MT-S0301, Digital processor: DP-0206

The SR-H2L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.

Specification  Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 92 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 80 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 668.4 (H) × 115 (D) mm (3.31" × 26.31" × 4.53“)
Weight 4.4 kg (9.7 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206