Content |
User\'s manual
LD Systems SAT 122 G2 W 12" passive Installation Speaker white
- Passive 2-way bass-reflex installation speaker
- 250 W permanent load capacity
- 121 dB maximum sound-level pressure
- 12" custom woofer and 1" Celestion high-frequency driver
- Rotating CD horn with 80° x 60° dispersion
- For vertical or horizontal use
- speakON-compatible and terminal block input
- 4 x M8 mounting holes
- Shock-resistant front grille for optimum speaker protection
- Extensive range of smart accessories for installation
- Available in black or white
With its streamlined, elegant design, the LD Systems SAT 122 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 12" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 122 G2 achieves a maximum sound pressure level of 121 dB over a frequency response curve of 60 Hz to 19 kHz with a permanent load capacity of 250 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 122 G2 is available in black (Art. No. LDSAT122G2) or white textured finish (Art. No. LDSAT122G2W).
Product type
Installation Loudspeakers
Type
Wall-mounted Loudspeaker
Low/mid driver dimensions
12 "
Woofer size
304.8 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil (mm)
63.5 mm
Horn
CD horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver brand
Celestion
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
80 x 60 °
Load rating (RMS)
250 W
Peak power
500 W
Frequency response
60 - 19000 Hz
SPL (1W/1m)
97 dB
Max. SPL
121 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Loudspeaker inputs
2
Speaker input connections
Speakon compatible , terminal block
Loudspeaker outputs
1
Speaker output connections
terminal block
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Cabinet colour
white
Cabinet construction
vented
Width
350 mm
Height
580 mm
Depth
310 mm
Weight
16,3 kg
|
Features
* DVX3121 12" LF Transducer with forced air cooling * ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver * 60° x 60° Coverage Pattern * 600W Continuous (2400W peak) power handling * High sensitivity, 131 dB maximum SPL * Adjustable monitor angle (45° or 55°) * 2 Anchor plates for single stud fittings and 7integral suspension points * Available in black or white * Passive/biamp selectable * Full line of accessories
Specifications
* Frequency Response (-3dB): 58Hz-15kHz * Frequency Range (-10dB): 48Hz-20kHz * Rec. Hipass Frequency: 50Hz * Axial Sensitivity: 97dB (1W/1m) * Max. Calculated SPL: 131 dB * Horizontal Coverage: 60° * Vertical Coverage: 60° * Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak * LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak * HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak * LF Transducer: DVX3121, 12" driver * HF Transducer: ND2, 1" exit Neodymium compressiondriver * Crossover Frequency: 2kHz * Nominal Impedance: 8 ohms * Minimum Impedance: 6.2 ohms * Connectors: (2) Neutrik Speakon NL4\'s * Enclosure Material: Polypropylene structural foam * Suspension: Enclosure has locations for 4 single-studattachment plates and10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear ofenclosure * Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo * Dimensions (H x W x D): 24.14" x 15.64" x 14.26“ * Net Weight: 43.7 lbs * Shipping Weight: 48.6 lbs |
Dual 12-inch two-way with 700 watts continuous, 2100 watts peak power handling. BIampable with 600 watts/4ohm LF and 75 watts 8ohm HF. DH7 3-inch voice coil titanium compression driver coupled with 75°x50° asymmetric CD horn aimed downward 10° . Weight: 35kg Measurements: 99x39x37,5cm |
Active or Passive Passive Frequency Response -10dB:48-20,000Hz Power Capacity 600W Maximum Sound Pressure Level (SPL) 131dB Nominal Sensitivity 97dB Impedance 8 ohms Crossover 2KHz Low Frequency Driver DVX3121, 12" (305mm) Driver High Frequency Driver ND2, 1" (25.4mm) exit Neodymium Enclosure Material Polypropylene Structural Foam Input Connections Glandnut SJO cable Mounting Options Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure Dimensions 24.14 x 15.64 x 14.26" (613 x 397 x 362mm) Weight 43.7 lbs (19.8 kg) |
The C5212 W is a full range extremely versatile wide-dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
Features |
---|
60° x 40° CMD (Constant Matching Design) constant directivity horn | 1.4" neodymium compression driver with 2.5" diaphragm assembly | 12" woofer with 3" voice coil | Dual-function design: built in passive crossover or external bi-amp | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) |
LICC (Low Impedance Compensated Crossover) network
Acoustical Specifications |
---|
Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | Max SPL @ 1m: | 132 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 10 | | System Sensitivity: | 99 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 500 Watt | | Peak Power Handling: | 200 Watt | | Recommended Amplifier: | 1000 | | Protections: | Dynamic | | Crossover frequencies: | 1200 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 2“HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 100 Watt AES | | Sensitivity: | 111 dB | | Woofer: | 12" woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 98 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 - Full range or Bi-Amp | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 9 x M10 inserts | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 600 / 23.62 mm/inch | | Width: | 364 / 14.33 mm/inch | | Depth: | 385 / 15.16 mm/inch | | Net Weight: | 23 / 50.7 Kg/Lbs |
|
|
Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, λευκού χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg. |
Reviews
There are no reviews yet.