LD Systems PHA 1 – Phantom Power 48 V

Discontinued
31%
LD_LOGO
All products by LD SYSTEMS

€47.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: Discontinued Discontinued SKU: LDPHA1 Category:
230/110V-AC/48V-DC phantom power unit for powering high-quality condenser microphones in the studio and stage sector.    

 

Read more

230/110V-AC/48V-DC phantom power unit for powering high-quality condenser microphones in the studio and stage sector.

 

 

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems PHA 1 – Phantom Power 48 V”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems PHA 1 - Phantom Power 48 V removeSUPERLUX PS-418-D BATTERY PHANTOM POWER SUPPLY FOR TQG Mic MINI XLR 3pin To XLR Male removeLD SYSTEMS LDPHA Mini XLR 3pin Male To XLR Male Adapter Phantom 48V removeShure MX-1BP Battery Phantom Power Preamplifier removeSENNHEISER K-6 BATTERY-PHANTOM POWER MODULE removePALMER AUDIO PAN48 TOOLS Phantom Power Unit remove
NameLD Systems PHA 1 - Phantom Power 48 V removeSUPERLUX PS-418-D BATTERY PHANTOM POWER SUPPLY FOR TQG Mic MINI XLR 3pin To XLR Male removeLD SYSTEMS LDPHA Mini XLR 3pin Male To XLR Male Adapter Phantom 48V removeShure MX-1BP Battery Phantom Power Preamplifier removeSENNHEISER K-6 BATTERY-PHANTOM POWER MODULE removePALMER AUDIO PAN48 TOOLS Phantom Power Unit remove
Image
SKULDPHA1PS418DLDPHAMX1BPH10SE00019PAN48
Rating
Price €47.00 incl. GR VAT€37.00 incl. GR VAT €26.00 incl. GR VAT €172.00 incl. GR VAT €235.00 incl. GR VAT €149.96 incl. GR VAT
Stock

Out of stock

In stock

In stock (can be backordered)

Available on backorder

In stock

Available on backorder

AvailabilityOut of stockIn stockIn stock (can be backordered)Available on backorderIn stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

230/110V-AC/48V-DC phantom power unit for powering high-quality condenser microphones in the studio and stage sector.

 

 

PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC，2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48"x3.3"x0.89") Weight: 245 g
Packaging: white box
Phantom Power Adapter 48V Mini XLR Male 3 pins > XLR male
Type
Phantom power adapter
Type
48 V to 5 V
Input connector
Mini-XLR (3-pin)
Gender of input connector
male
Output connector
XLR (3-pin)
Gender of output connector
male
Material
Metal
Length
94 mm
Diameter
19 mm
Weight
0,06 kg
 		The MX1BP is a battery-powered preamplifier designed to be used with Microflex? or other condenser microphones. It allows use of these microphones in situations where phantom power is not available. Features * 4-pin Tini Q-G? connector allows use with a variety of condenser microphones * Power LED Indicator indicates power status to the preamplifier * Mute/On switch attenuates microphone without turning off preamplifier * Belt clip allows mobility while using lavalier and headset microphones * Preamplifier operates on 9 V battery or phantom power * Features 3.7 m (12 ft) cord with attached male XLR connector

The K6 powering module is the heart of this Sennheiser professional modular
microphone system and can be powered either by its internal 'AA' size 1.5 V
battery or by 12 - 48 V phantom power. The K6 can be combined with different
condenser microphone heads to provide a wide variety of polar patterns. Matt
black, anodised scratch-resistant finish.
Profile
Powering module for battery/phantom powering with switchable roll-off filter, battery
on/off switch with battery test. Suitable for ME 62 - ME 67 microphone heads and
-60 versions of MKE microphones.Transmission factor 0 dB at 1 kHz, nominal
impedance 200 Ohm, min. terminating impedance 1 kOhm, max. output voltage 2 V
(at 1 kHz), power supply: phantom powering 12 - 48 V or 1.5 V (AA size)alkaline
battery, supply current 2.2 mA, battery life approx. 150 h, dimensions in mm:
? 22 x 155, resultant length 94 mm, weight approx. 45 g.

Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch with battery test
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6 powering module
1 MZQ 200 microphone clamp
1 AA battery
1 protective carrying case

Technical Data
Nominal impedance  200 Ohm 
Min. terminating impedance  1000 Ohm 
Output voltage  2 V 
Power supply  Phantom 12 - 48 V 1x Typ IEC LR 06 
Current consumption  2,2 mA 
Operating time (Battery)  max. 150 h 
Dimensions  d 22 x 94 mm (netto) 
Weight  ca. 45 g 
Gain  0 dB 

Palmer Pan 48 is a unit for the external power supply of phantom powered appliances. Due to the high current level of a maximum of 20mA, the application is not just limited to condenser microphones. PAN 48 is excellent for supplying phantom powered active DI-boxes. The box has two channels. Specifications: 2 channels, each channel: Microphone input: XLR/f Pin 2 & 3 +48VDC, Pin 1 Ground Output: XLR/m no DC voltage Ground lift switch Phantom power stabilized ±5%. Low ripple, low noise Max. current 20mA totally. LED control. Metal casing 110x110x45mm

Weight1.00 kg1.00 kg0.10 kg0.40 kg0.50 kg0.90 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 1.00 kg
Weight 0.10 kg
Weight 0.40 kg
Weight 0.50 kg
Weight 0.90 kg

Related products