LD Systems LDDJ300 Power Amplifier 2 x 150 W 4 Ohm

285.00 incl. GR VAT

In stock

EAN: 4049521135958
Installments calculation
CompareAdd to wishlist Submit Better Price
PA Power Amplifier 2 x 150 W 4 Ohm User’s manual LD Systems DJ300 Power Amplifier The DJ300 is a value-priced, full-featured Class AB power amplifier with an output of 150W per channel @ 4 ohms and 250W in 8-ohm bridge mode. Its sturdy construction paired with low weight makes it perfect for DJs in […]

 

Read more

PA Power Amplifier 2 x 150 W 4 Ohm

User’s manual

LD Systems DJ300 Power Amplifier

The DJ300 is a value-priced, full-featured Class AB power amplifier with an output of 150W per channel @ 4 ohms and 250W in 8-ohm bridge mode. Its sturdy construction paired with low weight makes it perfect for DJs in mobile use and smaller permanent installations.

It has extensive protection circuitry, a low-noise cooling fan, and a power-on delay. It uses XLR and stereo TRS sockets as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ300 functions in the entire frequency range of 20Hz – 20kHz with high dependability, dynamics, and impulse fidelity.

Product type

Power Amplifiers


Type

PA Power Amplifiers


Rated ouput power (1kHz @ 4 Ohms)

2 x 150 W


Rated ouput power (1kHz @ 8 Ohms)

2 x 100 W


Rated ouput power (1kHz @ 8 Ohms, bridged)

250 W


Output circuitry

Class A/B


Frequency response

20 – 20000 Hz


THD

0.05%


Gain

28 dB


Input sensitivity

0.85 V


Protection circuits

DC , over-current , short circuit , soft start , thermal overload


Controls

ground lift , mode , On / Off , volume


Indicators

clip , Power , protect (protection circuit engaged)


Line inputs

2


Line input connectors

6.3 mm Jack , XLR


Loudspeaker outputs

2


Speaker output connections

Speakon compatible , Terminal posts


Cooling

fan


Operating voltage

230 V AC


Width

483 mm


Height

88 mm


Depth

298 mm


Weight

8,5 kg

Weight 9.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDDJ300 Power Amplifier 2 x 150 W 4 Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDDJ300 Power Amplifier 2 x 150 W 4 Ohm removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeInterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω removeBITTNER AUDIO XB800-2x400W-4Ω POWER AMPLIFIER removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω remove
NameLD Systems LDDJ300 Power Amplifier 2 x 150 W 4 Ohm removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeInterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω removeBITTNER AUDIO XB800-2x400W-4Ω POWER AMPLIFIER removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω remove
Image
SKULDDJ300LDDP600V-1000E009302XB800E009274
Rating
Price 285.00 incl. GR VAT 450.00 incl. GR VAT 330.26 incl. GR VAT 754.00 incl. GR VAT 994.48 incl. GR VAT 830.00 incl. GR VAT
Stock

In stock

In stock

In stock

Available on backorder

Available on backorder

In stock

AvailabilityIn stockIn stockIn stockAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentPA Power Amplifier 2 x 150 W 4 Ohm User's manual LD Systems DJ300 Power Amplifier The DJ300 is a value-priced, full-featured Class AB power amplifier with an output of 150W per channel @ 4 ohms and 250W in 8-ohm bridge mode. Its sturdy construction paired with low weight makes it perfect for DJs in mobile use and smaller permanent installations. It has extensive protection circuitry, a low-noise cooling fan, and a power-on delay. It uses XLR and stereo TRS sockets as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the volume controls indicate functional status, overloading, and triggering of the protection circuit. The DJ300 functions in the entire frequency range of 20Hz - 20kHz with high dependability, dynamics, and impulse fidelity. Product type Power Amplifiers
Type PA Power Amplifiers
Rated ouput power (1kHz @ 4 Ohms) 2 x 150 W
Rated ouput power (1kHz @ 8 Ohms) 2 x 100 W
Rated ouput power (1kHz @ 8 Ohms, bridged) 250 W
Output circuitry Class A/B
Frequency response 20 - 20000 Hz
THD 0.05%
Gain 28 dB
Input sensitivity 0.85 V
Protection circuits DC , over-current , short circuit , soft start , thermal overload
Controls ground lift , mode , On / Off , volume
Indicators clip , Power , protect (protection circuit engaged)
Line inputs 2
Line input connectors 6.3 mm Jack , XLR
Loudspeaker outputs 2
Speaker output connections Speakon compatible , Terminal posts
Cooling fan
Operating voltage 230 V AC
Width 483 mm
Height 88 mm
Depth 298 mm
Weight 8,5 kg

The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W  2 Ohm

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 2 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms)
2 x 400 W

Rated ouput power (1kHz @ 8 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms, bridged)
600 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
800 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

THD
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>80 dB

Gain
35 dB

Input sensitivity
0.75 V

Protection circuits
clip limiter , DC protection , short circuit , thermal overload

Controls
2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
2

Speaker output connections
Speakon compatible , Terminal posts

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
12,8 kg

Features
Volex mains socket

InterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm bridge 1200W/4ohm 10-83kHz

high pass filter 30Ηz & 50Ηz


Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

acrobat_reader_logo.

Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 900 W, 4 Ω - 600 W, 8 Ω - 380 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1700 W, 4 Ω - 950 W, 8 Ω - 480 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1800 W, 8 Ω - 1200 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +3.1 dBu (1.11 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 14.8 kg (32.6 lbs)

Weight9.00 kg13.00 kg10.30 kg12.60 kg13.00 kg14.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 9.00 kg
Weight 13.00 kg
Weight 10.30 kg
Weight 12.60 kg
Weight 13.00 kg
Weight 14.80 kg