LD Systems LDDJ300 Power Amplifier 2 x 150 W 4 Ohm

285.00 incl. GR VAT

In stock

EAN: 4049521135958
Installments calculation
CompareAdd to wishlist Submit Better Price
PA Power Amplifier 2 x 150 W 4 Ohm User’s manual LD Systems DJ300 Power Amplifier The DJ300 is a value-priced, full-featured Class AB power amplifier with an output of 150W per channel @ 4 ohms and 250W in 8-ohm bridge mode. Its sturdy construction paired with low weight makes it perfect for DJs in […]

 

Read more

PA Power Amplifier 2 x 150 W 4 Ohm

User’s manual

LD Systems DJ300 Power Amplifier

The DJ300 is a value-priced, full-featured Class AB power amplifier with an output of 150W per channel @ 4 ohms and 250W in 8-ohm bridge mode. Its sturdy construction paired with low weight makes it perfect for DJs in mobile use and smaller permanent installations.

It has extensive protection circuitry, a low-noise cooling fan, and a power-on delay. It uses XLR and stereo TRS sockets as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ300 functions in the entire frequency range of 20Hz – 20kHz with high dependability, dynamics, and impulse fidelity.

Product type

Power Amplifiers


Type

PA Power Amplifiers


Rated ouput power (1kHz @ 4 Ohms)

2 x 150 W


Rated ouput power (1kHz @ 8 Ohms)

2 x 100 W


Rated ouput power (1kHz @ 8 Ohms, bridged)

250 W


Output circuitry

Class A/B


Frequency response

20 – 20000 Hz


THD

0.05%


Gain

28 dB


Input sensitivity

0.85 V


Protection circuits

DC , over-current , short circuit , soft start , thermal overload


Controls

ground lift , mode , On / Off , volume


Indicators

clip , Power , protect (protection circuit engaged)


Line inputs

2


Line input connectors

6.3 mm Jack , XLR


Loudspeaker outputs

2


Speaker output connections

Speakon compatible , Terminal posts


Cooling

fan


Operating voltage

230 V AC


Width

483 mm


Height

88 mm


Depth

298 mm


Weight

8,5 kg

Weight 9.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDDJ300 Power Amplifier 2 x 150 W 4 Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDDJ300 Power Amplifier 2 x 150 W 4 Ohm removeAMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removePHONIC MAX-1500 PLUS v.10 Power Amplifier 2x450W removeYAMAHA PC-2001N Power Amplifier 2x250W removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeINTERM R-500 PLUS AMPLIFIER 2X250W remove
NameLD Systems LDDJ300 Power Amplifier 2 x 150 W 4 Ohm removeAMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removePHONIC MAX-1500 PLUS v.10 Power Amplifier 2x450W removeYAMAHA PC-2001N Power Amplifier 2x250W removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeINTERM R-500 PLUS AMPLIFIER 2X250W remove
Image
SKULDDJ300E003175H06PH00016H060.00037LDDP600R-500 PLUS
Rating
Price 285.00 incl. GR VAT 592.00 incl. GR VAT 350.00 incl. GR VAT 1,444.00 incl. GR VAT 450.00 incl. GR VAT 761.00 incl. GR VAT
Stock

In stock

In stock

In stock

Available on backorder

In stock

In stock

AvailabilityIn stockIn stockIn stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentPA Power Amplifier 2 x 150 W 4 Ohm User's manual LD Systems DJ300 Power Amplifier The DJ300 is a value-priced, full-featured Class AB power amplifier with an output of 150W per channel @ 4 ohms and 250W in 8-ohm bridge mode. Its sturdy construction paired with low weight makes it perfect for DJs in mobile use and smaller permanent installations. It has extensive protection circuitry, a low-noise cooling fan, and a power-on delay. It uses XLR and stereo TRS sockets as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the volume controls indicate functional status, overloading, and triggering of the protection circuit. The DJ300 functions in the entire frequency range of 20Hz - 20kHz with high dependability, dynamics, and impulse fidelity. Product type Power Amplifiers
Type PA Power Amplifiers
Rated ouput power (1kHz @ 4 Ohms) 2 x 150 W
Rated ouput power (1kHz @ 8 Ohms) 2 x 100 W
Rated ouput power (1kHz @ 8 Ohms, bridged) 250 W
Output circuitry Class A/B
Frequency response 20 - 20000 Hz
THD 0.05%
Gain 28 dB
Input sensitivity 0.85 V
Protection circuits DC , over-current , short circuit , soft start , thermal overload
Controls ground lift , mode , On / Off , volume
Indicators clip , Power , protect (protection circuit engaged)
Line inputs 2
Line input connectors 6.3 mm Jack , XLR
Loudspeaker outputs 2
Speaker output connections Speakon compatible , Terminal posts
Cooling fan
Operating voltage 230 V AC
Width 483 mm
Height 88 mm
Depth 298 mm
Weight 8,5 kg

- Output Power:
500W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
330W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
- Bridge Mode, Mono 820W RMS @ 8 Ohms, 1K Hz, 1% THD
- Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
- Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
- Slew Rate: 15V Per usec
- Damping Factor: @ 8 Ohm: 300
- Impedance: 20 Ohms balanced / 10 Ohms unbalanced
- Cooling System: 2 individual fans
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiter
- build in clip limiter
- Input: XLR 3pin + Jack 6,3mm
- output: Speakon + Binding post
- Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces
- Weight: 15 KG.

Phonic's MAX 1500 Power Amplifier provides 900 Watts of power at 8 ohms (bridge mono) or 450 Watts at 4 ohms (stereo) - ideal for clubs, churches, auditoriums and more. Input to the MAX 1500 amp is achieved via XLR or phone jack, and output is achieved either through Speakon-type connectors or traditional binding posts. The MAX 1500 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.
  • Output power: 450W @ 4 Ohms stereo, 280W @ 8 Ohms stereo
  • High-current toroidal transformers for greater power and low noise
  • Independent user-defeatable peak limiters reduce distortion
  • Selectable High-Pass filter at 30Hz or 50Hz
  • XLR and 1/4' TRS input jacks
  • Binding post and Speakon?-type outputs
  • Front mounted gain controls for easy access
  • Signal and Peak LED indicators to monitor performance
  • Short circuit, thermal, subsonic, RF protection, output DC offset
  • Power on/off muting

A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange, and superbly defined highs. They also deliver fast response and exceptional stability even in the face of serious power supply limitations. Refinements throughout this expanded five-model lineup make these amplifiers the new benchmarks for quality, reliability, and versatility in professional applications. Frequency Response: 10 Hz – 40 KHz. Output Power: 2 x 250 Watt / 8Ω RMS, 2 x 450 Watt / 4Ω RMS, 900 Watt / 8Ω bridge RMS. Weight: 12,5 Kg.

The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W  2 Ohm

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 2 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms)
2 x 400 W

Rated ouput power (1kHz @ 8 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms, bridged)
600 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
800 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

THD
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>80 dB

Gain
35 dB

Input sensitivity
0.75 V

Protection circuits
clip limiter , DC protection , short circuit , thermal overload

Controls
2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
2

Speaker output connections
Speakon compatible , Terminal posts

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
12,8 kg

Features
Volex mains socket

Power Output Level R-300 PLUS

STEREO
8ohm(T.H.D 0.05%)  170W+170W
4ohm(T.H.D 0.05%)  250W+250W

BRIDGED MONO
8ohm(T.H.D 0.05%)  460W
8ohm(T.H.D 0.5%)    500W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10k&ohm;@0.775V Inputs

Weight9.00 kg15.00 kg16.00 kg12.50 kg13.00 kg10.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 9.00 kg
Weight 15.00 kg
Weight 16.00 kg
Weight 12.50 kg
Weight 13.00 kg
Weight 10.40 kg