LD Systems LDDJ500 Power Amplifier 2 x 250 W 4 Ohm

Discontinued

319.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The DJ500 is a powerful, full-featured Class AB power amplifier with an output of 250W per channel 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations. The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front […]

 

Read more

The DJ500 is a powerful, full-featured Class AB power amplifier with an output of 250W per channel 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations.

The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front panel and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ500 functions in the entire frequency range of 20Hz – 20kHz with extremely high dependability, dynamics, and impulse fidelity.

  • Type: 2-channel
  • Output Power 1 KHz @ 4 ohms: 2 x 250 W
  • Output Power 1 KHz @ 8 ohms: 2 x 150 W
  • Output Power 1 KHz @ Bridge 8 ohms: 500 W
  • Output Circuity: Class A/B
  • Frequency Range: 20 – 20.000 Hz
  • THD: 0,05%
  • Voltage Gain: 30dB
  • Input Sensivity: 0,85V
  • Protection: Soft start, short circuit, DC, Temperature, over current
  • Controls:ON/ OFF, Volume, Mode (Bridge/ Stereo), Ground-Lift
  • Indicators: Power, Clip, Protect
  • Connectors Line Input: 2 x XLR, 2 x 6,3mm jack
  • Connectors Speaker Output: 2 x Speakon compatible, 2 x binding post
  • Cooling System: Fan
  • Power Supply: 230V / 50-60 Hz
  • Dimensions (W x H x D): 483 x 88 x 298 mm
Weight 7.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDDJ500 Power Amplifier 2 x 250 W 4 Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDDJ500 Power Amplifier 2 x 250 W 4 Ohm removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS removeAMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removeINTERM R-150 PLUS AMPLIFIER 2X75W removeRCF HPS 1500: CLASS H PROFESSIONAL POWER AMPLIFIER removeBITTNER AUDIO XB400-2x200W-4Ω POWER AMPLIFIER remove
NameLD Systems LDDJ500 Power Amplifier 2 x 250 W 4 Ohm removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS removeAMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removeINTERM R-150 PLUS AMPLIFIER 2X75W removeRCF HPS 1500: CLASS H PROFESSIONAL POWER AMPLIFIER removeBITTNER AUDIO XB400-2x200W-4Ω POWER AMPLIFIER remove
Image
SKULDDJ500ED600E003175R-150 PLUSHPS1500XB400
Rating
Price 319.00 incl. GR VAT 585.89 incl. GR VAT 592.00 incl. GR VAT 459.00 incl. GR VAT 596.44 incl. GR VAT 744.00 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderIn stockIn stockAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe DJ500 is a powerful, full-featured Class AB power amplifier with an output of 250W per channel 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations. The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front panel and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit. The DJ500 functions in the entire frequency range of 20Hz - 20kHz with extremely high dependability, dynamics, and impulse fidelity.
  • Type: 2-channel
  • Output Power 1 KHz @ 4 ohms: 2 x 250 W
  • Output Power 1 KHz @ 8 ohms: 2 x 150 W
  • Output Power 1 KHz @ Bridge 8 ohms: 500 W
  • Output Circuity: Class A/B
  • Frequency Range: 20 - 20.000 Hz
  • THD: 0,05%
  • Voltage Gain: 30dB
  • Input Sensivity: 0,85V
  • Protection: Soft start, short circuit, DC, Temperature, over current
  • Controls:ON/ OFF, Volume, Mode (Bridge/ Stereo), Ground-Lift
  • Indicators: Power, Clip, Protect
  • Connectors Line Input: 2 x XLR, 2 x 6,3mm jack
  • Connectors Speaker Output: 2 x Speakon compatible, 2 x binding post
  • Cooling System: Fan
  • Power Supply: 230V / 50-60 Hz
  • Dimensions (W x H x D): 483 x 88 x 298 mm

The high efficiency of the ED series enables maximum efficiency with low heat generation.

A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The amplifier provides 2x300W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 300 Watt rms 
Power output stereo 8Ω:2 x 180 Watt rms 
Power output bridged 8Ω:600 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 105 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 10.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Temperature, DC, RFI short circuit, Soft-Start thermal on transformer 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:6 A 
Power Consumption:1300 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:350 / 13.77 mm/inch 
Net Weight:11.45 / 25.24 Kg/Lbs 
SHIPPING INFORMATION
Package height:120 / 4.72 mm/inch 
Package width:540 / 21.25 mm/inch 
Package depth:470 / 18.05 mm/inch 
Shipping Weight:13.81 / 30.44 Kg/Lbs

 

- Output Power:
500W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
330W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
- Bridge Mode, Mono 820W RMS @ 8 Ohms, 1K Hz, 1% THD
- Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
- Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
- Slew Rate: 15V Per usec
- Damping Factor: @ 8 Ohm: 300
- Impedance: 20 Ohms balanced / 10 Ohms unbalanced
- Cooling System: 2 individual fans
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiter
- build in clip limiter
- Input: XLR 3pin + Jack 6,3mm
- output: Speakon + Binding post
- Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces
- Weight: 15 KG.

Power Output Level R-150 PLUS

STEREO
8ohm(T.H.D 0.05%)  50W+50W
4ohm(T.H.D 0.05%)  75W+75W

BRIDGED MONO
8ohm(T.H.D 0.05%)  50W
8ohm(T.H.D 0.5%)  170W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10kΩ@0.775V Inputs

HPS 1500 is a 2 channel power amplifier that delivers up to 2 x 750 W RMS @ 4 Ω (1500 W RMS bridged @ 8 Ω).

XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.
A forced air cooling system maintains a low operating temperature.

Features
Fast response and low distortion
Easy to configure in stereo / mono / bridge modes
Extensive protective circuits ensure high reliability and operating safety
Front panel signal / clip / protect LED indicators
Minimum load impedance (stereo / mono): 4 Ohm
XLR input connectors
SPEAKON output connectors
Switchable limiter

2 unit 19" rack, low weight for easy transportation

 

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 750 Watt rms 
Power output stereo 8Ω:2 x 450 Watt rms 
Power output bridged 8Ω:1500 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:106 dB 
Damping factor:> 300 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:xlr 
Input sensitivity:1.4 V (/ 32 – 26 dB) dBm/V RMS 
Input impedance: 20 kΩ (balanced), 10 kΩ (unbalanced) kΩ 
OUTPUT SECTION
Output connector:Speakon 
SYSTEM PARAMETERS
Cooling:Forced 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220 ÷ 240 V (50 / 60 Hz) V ~ Hz  
PHYSICAL SPECIFICATIONS
Height:88/3.4 mm/inch 
Width:482/18.9 mm/inch 
Depth:420/16.5 mm/inch 
Net Weight:17/37.4 Kg/Lbs

 

 

XB Series - Intelligent Power

Power Without Compromises.
The XB is designed for paging, music and alarm signals. Versatile, dynamic
and extremely rugged according to IEC286-3. For the highest requirements
in safety and quality.
Sequential power on, alive contacts and incorporated ground fault detection-
the XB is the solution under all conditions. Without the need for additional
equipment. For uninterrupted and troublefree operation.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter,
3 ms Muting Delay
PHOENIX / Speakon
LED Indicators for POWER, SIGNAL, CLIP, PROTECT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XB 400:  2x 200 W @ 4 Ohm
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.025%
Signal-to-Noise Ratio:  < 103 dB
Channel Seperation:  > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  500 @ 4 Ohm
Cooling:  2x fan (temp. reg. variable speed)
Weight:12 kg /(26 lbs)                                    
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

Weight7.00 kg13.81 kg15.00 kg7.20 kg20.00 kg12.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 7.00 kg
Weight 13.81 kg
Weight 15.00 kg
Weight 7.20 kg
Weight 20.00 kg
Weight 12.00 kg