LD Systems ROADBUDDY 10 B5 Battery Powered Bluetooth Speaker with Mixer and Wireless Microphone

667.27 incl. GR VAT

Available on backorder

EAN: 4049521204593
Installments calculation
CompareAdd to wishlist Submit Better Price
LD Systems ROADBUDDY 10 B5 Battery Powered Bluetooth Speaker with Mixer and Wireless Microphone Battery-powered speaker solution Integrated radio receiver 584 – 607 MHz Bluetooth player with USB port and SD card slot Class D power amplifier with 480 watts of peak power 2 combo sockets for microphone or line inputs 3.5 mm Aux input […]

 

Read more

LD Systems ROADBUDDY 10 B5
Battery Powered Bluetooth Speaker with Mixer and Wireless Microphone

  • Battery-powered speaker solution
  • Integrated radio receiver 584 – 607 MHz
  • Bluetooth player with USB port and SD card slot
  • Class D power amplifier with 480 watts of peak power
  • 2 combo sockets for microphone or line inputs
  • 3.5 mm Aux input
  • Master section with 2-band EQ
  • Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
  • Wireless microphone and IR-remote control included

 

ROADBUDDY 10 B5

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10″ custom woofer and a 1″ compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power. The Roadbuddy relies fully on wireless transmission: it has an UHF radio receiver which operates in the 584 -607 MHz range, and can be expanded with an additional system. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. A handheld microphone with 10 mW output power(LDRBUD10B5) or as an alternative a headset microphone with belt pack (LDRBUD10HSB5) and an IR-remote control for the player are included. For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel. The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

 

Product type

Battery-powered PA speaker


Low/mid driver dimensions

10 ”


Woofer Size

254 mm


Woofer magnet

Ferrite


Woofer brand

Custom-made


HF driver dimensions

1 ”


HF Driver Size

25.4 mm


HF driver magnet

Ferrite


HF driver brand

Custom-made


Amplifier

Class D


RMS

120 W


Peak power

480 W


Frequency response

55 – 18000 Hz


SPL (1W/1m)

96 dB


Max. SPL

115 dB


Protection circuits

over-current , short circuit , thermal overload


Controls

AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume


Indicators

Charge/battery status , Power


Media player


Supported media

Bluetooth , SD Card , USB stick


Supported formats

MP3 file , WAV-CD , WMA file


Media player controls

equalizer , Mode (Menu / Bluetooth /SD / USB) , Next Track , Play / Pause , Previous Track , Repeat , Stop


Media player display elements

Lighted multifunctional LC display


Line inputs

1


Line input connectors

2 x RCA , 2 x XLR , 3.5 mm jack , 6.3 mm Jack


Mic inputs

2


Mic inputs

2 x XLR , 6.3 mm Jack


Wireless Unit


Transmission frequency range

584 – 607 MHz


Modulation Type

FM


Channels

16


Frequency Response Wireless Unit

50 – 17000lx @ 1m Hz


Controllers Wireless Unit

ASC , Mute Level (Squelch) , Power / Volume , Value Down , Value Up


Indicators Wireless Unit

AF (LED) , LED Display , RF (LED)


Connections Wireless Unit

nTNC for receiver antenna


RF Transmitter Power Output

10 mW


Handheld Microphone Weight

0.285 kg


Handheld Microphone Material

aluminium


Operating voltage

Switching Power Supply


Operating voltage

220 V – 240 V AC / 50 Hz


Rechargeable batteries

12 V / 5 Ah


Cabinet material

polypropylene


Cabinet construction

vented


Width

415 mm


Height

525 mm


Depth

328 mm


Weight

16,5 kg


Other features

extendable handle , IR Remote for Media Player , Stand mount 36 mm , Transport casters , transport handle

 

 

Weight 17.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems ROADBUDDY 10 B5 Battery Powered Bluetooth Speaker with Mixer and Wireless Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems ROADBUDDY 10 B5 Battery Powered Bluetooth Speaker with Mixer and Wireless Microphone removeLD SYSTEMS LDRM102HS B6 Roadman 102 Portable PA Sound System incl. wireless Headset 655 - 679 MHz removeOMNITRONIC WAMS-08BT ACTIVE SPEAKER 8'' WITH BATTERY removeLD Systems LDRM102SL Roadman 102 Active Slave Speaker Unit for PA Portable System removeLD SYSTEMS LDRM102 Roadman 102 Portable PA Sound System removeMIPRO MA-708D Portable speaker with Cd player/Bluetooth remove
NameLD Systems ROADBUDDY 10 B5 Battery Powered Bluetooth Speaker with Mixer and Wireless Microphone removeLD SYSTEMS LDRM102HS B6 Roadman 102 Portable PA Sound System incl. wireless Headset 655 - 679 MHz removeOMNITRONIC WAMS-08BT ACTIVE SPEAKER 8'' WITH BATTERY removeLD Systems LDRM102SL Roadman 102 Active Slave Speaker Unit for PA Portable System removeLD SYSTEMS LDRM102 Roadman 102 Portable PA Sound System removeMIPRO MA-708D Portable speaker with Cd player/Bluetooth remove
Image
SKULDRBUD10B5LDRM102HSB6WAMS-08BTLDRM102SLLDRM102MIP00154
Rating
Price 667.27 incl. GR VAT 1,063.13 incl. GR VAT 349.00 incl. GR VAT 550.75 incl. GR VAT 1,122.55 incl. GR VAT 1,329.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

LD Systems ROADBUDDY 10 B5
Battery Powered Bluetooth Speaker with Mixer and Wireless Microphone

  • Battery-powered speaker solution
  • Integrated radio receiver 584 - 607 MHz
  • Bluetooth player with USB port and SD card slot
  • Class D power amplifier with 480 watts of peak power
  • 2 combo sockets for microphone or line inputs
  • 3.5 mm Aux input
  • Master section with 2-band EQ
  • Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
  • Wireless microphone and IR-remote control included
  ROADBUDDY 10 B5 The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power. The Roadbuddy relies fully on wireless transmission: it has an UHF radio receiver which operates in the 584 -607 MHz range, and can be expanded with an additional system. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. A handheld microphone with 10 mW output power(LDRBUD10B5) or as an alternative a headset microphone with belt pack (LDRBUD10HSB5) and an IR-remote control for the player are included. For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel. The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.   Product type Battery-powered PA speaker
Low/mid driver dimensions 10 "
Woofer Size 254 mm
Woofer magnet Ferrite
Woofer brand Custom-made
HF driver dimensions 1 "
HF Driver Size 25.4 mm
HF driver magnet Ferrite
HF driver brand Custom-made
Amplifier Class D
RMS 120 W
Peak power 480 W
Frequency response 55 - 18000 Hz
SPL (1W/1m) 96 dB
Max. SPL 115 dB
Protection circuits over-current , short circuit , thermal overload
Controls AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume
Indicators Charge/battery status , Power
Media player
Supported media Bluetooth , SD Card , USB stick
Supported formats MP3 file , WAV-CD , WMA file
Media player controls equalizer , Mode (Menu / Bluetooth /SD / USB) , Next Track , Play / Pause , Previous Track , Repeat , Stop
Media player display elements Lighted multifunctional LC display
Line inputs 1
Line input connectors 2 x RCA , 2 x XLR , 3.5 mm jack , 6.3 mm Jack
Mic inputs 2
Mic inputs 2 x XLR , 6.3 mm Jack
Wireless Unit
Transmission frequency range 584 - 607 MHz
Modulation Type FM
Channels 16
Frequency Response Wireless Unit 50 - 17000lx @ 1m Hz
Controllers Wireless Unit ASC , Mute Level (Squelch) , Power / Volume , Value Down , Value Up
Indicators Wireless Unit AF (LED) , LED Display , RF (LED)
Connections Wireless Unit nTNC for receiver antenna
RF Transmitter Power Output 10 mW
Handheld Microphone Weight 0.285 kg
Handheld Microphone Material aluminium
Operating voltage Switching Power Supply
Operating voltage 220 V - 240 V AC / 50 Hz
Rechargeable batteries 12 V / 5 Ah
Cabinet material polypropylene
Cabinet construction vented
Width 415 mm
Height 525 mm
Depth 328 mm
Weight 16,5 kg
Other features extendable handle , IR Remote for Media Player , Stand mount 36 mm , Transport casters , transport handle    

pdfQuick Start Guide
pdfUser´s manual

pdfFrequency list
 

LD Systems Roadman 102 HS B6
Portable PA Speaker with Headset Microphone

The LD Systems Roadman 102 HS B6 is a mobile and compact sound system

The Roadman 102 HS B5 is a compact and mobile PA solution with integrated battery. This system is perfectly suitable for solo entertainers, churches, schools, business conferences or presentations where versatility is required. The Roadman comes with a CD/MP3/USB/SD Player as well as a wireless microphone unit and headset. A second wireless microphone unit can also be integrated as an option.

Product type
Battery-powered PA speaker

Type
Set with Handheld Transmitter

Low/mid driver dimensions
10 "

Woofer Size
254 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

HF driver dimensions
1 "

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
Custom-made

Amplifier
Class D

RMS
80 W

Peak power
320 W

Frequency response
70 - 16000lx @ 1m Hz

SPL (1W/1m)
95 dB

Max. SPL
115 dB

Protection circuits
short circuit

Controls
Audio-link set (master / slave) , Audio-link slave volume , Bass , Line Gain , Master , Power , Speech / music switch (Mic / Line 1) , Speech / music switch (Mic / Line 2) , Tape volume , Treble , Value Down , Voice priority on / off , Volume Mic 1 , Volume Mic 2

Indicators
Charge/battery status , Power

Media player


Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick

Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD

Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop

Media player display elements
Lighted multifunctional LC display

Line inputs
3

Line input connectors
2 x RCA , Audio-link input XLR, female

Mic inputs
2

Mic inputs
6.3 mm Jack , XLR

Line outputs
2 x sat output 100 Hz

Line output connectors
2 x RCA , Audio-link output XLR, male

Loudspeaker outputs
Speaker Out Switched , Speaker Out Unswitched

Speaker output connections
6.3 mm Jack

Transmission frequency range
655 - 679 MHz

Operating voltage
transformer

Operating voltage
200 V AC - 250 V AC , 24 V DC - 32 V DC (5A)

Rechargeable batteries
2 x 12 V / 4.5 AH

Cabinet material
aluminium , plastic

Cabinet construction
vented

Width
355 mm

Height
610 mm

Depth
315 mm

Weight
19 kg

Other features
additional radio receiver (LDRM102R) available optionally , Audio-link function , Cassette player available optionally , Stand mount 36 mm , Transport bag available optionally , Transport casters , transport handle , Trolley handle

 

 

Info

Portable PA system with UHF receiver unit, audio player and Bluetooth - Portable all-in-one PA system for mobile use - Ideal for mains independent and wireless applications, e.g. at sales events, lectures and gyms - 4-channel power mixer (40 W RMS) and 2-way speaker system with a 20 cm woofer (8“) - MP3 player with Bluetooth receiver and IR remote control - SD card slot and USB input - Stream music wirelessly from your mobile devices (e.g. smartphone, tablet) via Bluetooth - Integrated UHF receiver unit and matching wireless microphone - Mains operation or battery operation for up to 4 hours of music playing - Integrated automatic charging of the battery - Lead gel battery optionally available (E6506305) - 2 mono input channels mic/line with adjustable echo effect - 1 stereo stereo input channel for line signal sources e.g. CD players and notebook - Common 2-band EQ for highs and lows - Link output for the combination of several amplifier systems - Jack for external 12V battery operation (e.g. car battery) - Black plastic enclosure with metal grille and carrying handle - Operation of the hand-held microphone via 2 x AA batteries (not included) - Flange for speaker stand installation etc.

RoadMan 102 Slave Speaker Box to loop in until 20 units (incl. 24V DC rechargeable Battery and Power supply)  
Product type
Battery-powered PA speaker accessories
Type
active, Follower loudspeaker
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Amplifier
Class D
System Power (RMS)
80 W
Peak power
320 W
Frequency response
70 - 16.000
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-Link Follower Volume, Power
Indicators
Charge/battery status
Line inputs
1
Line input connectors
Audio-link input XLR, female
Line outputs
1
Line output connectors
Audio-link output XLR, male
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC, 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Width
355 mm
Height
610 mm
Depth
315 mm
Other features
Stand mount 36 mm, Transport bag available optionally, transport handle, Trolley handle
Weight
18 kg

pdfFrequency list
pdfQuick Start Guide
pdfFrequency list
pdfFrequency list
pdfUser´s manual

The LD Systems Roadman 102 is a mobile and compact sound system

The Roadman 102 is a compact and mobile PA solution with integrated battery. This system is perfectly suitable for solo entertainers, churches, schools, business conferences or presentations where versatility is required. The Roadman comes with a CD/MP3/USB/SD Player as well as a wireless microphone unit with handheld mic. A second wireless microphone unit are also available in option.

 

Product type
Battery-powered PA speaker

Type
Set with Handheld Transmitter

Low/mid driver dimensions
10 "

Woofer Size
254 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

HF driver dimensions
1 "

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
Custom-made

Amplifier
Class D

RMS
80 W

Peak power
320 W

Frequency response
70 - 16.000 Hz

SPL (1W/1m)
95 dB

Max. SPL
115 dB

Protection circuits
short circuit

Controls
Audio-link set (master / slave) , Audio-link slave volume , Bass , Line Gain , Master , Power , Speech / music switch (Mic / Line 1) , Speech / music switch (Mic / Line 2) , Tape volume , Treble , Value Down , Voice priority on / off , Volume Mic 1 , Volume Mic 2

Indicators
Charge/battery status , Power

Media player


Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick

Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD

Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop

Media player display elements
Lighted multifunctional LC display

Line inputs
3

Line input connectors
2 x RCA , Audio-link input XLR, female

Mic inputs
2

Mic inputs
6.3 mm Jack , XLR

Line outputs
3

Line output connectors
2 x RCA , Audio-link output XLR, male

Loudspeaker outputs
Speaker Out Switched , Speaker Out Unswitched

Speaker output connections
6.3 mm Jack

Operating voltage
transformer

Operating voltage
200 V AC - 250 V AC , 24 V DC - 32 V DC (5A)

Rechargeable batteries
2 x 12 V / 4.5 AH

Cabinet material
aluminium , plastic

Cabinet construction
vented

Width
355 mm

Height
610 mm

Depth
315 mm

Weight
19 kg

Other features
additional radio receiver (LDRM102R) available optionally , Audio-link function , Cassette player available optionally , Stand mount 36 mm , Transport bag available optionally , Transport casters , transport handle , Trolley handle
 
 

Portable PA System Max. 180 Watt incl. CDM-3A Player with Remote Control
Robust, rugged enclosure, built-in class D amplifiers system with 8" woofer and 1" tweeter.
Up to 4 UHF or 2.4 GHz diversity receiver modules with 16 auto-scannable frequencies and built-in active antenna prevents accidental antenna breakage.
Plug-&-play CD/MP3 player, plus certified Bluetooth receiver for music streaming.
Voice Priority mutes music when a wireless mic is used.
Echo effect for richer-sounding vocals.
Industry’s only Master volume with "Memory” and "Standard” mode options. "Memory” mode saves and recalls last volume level during next power on. "Standard” mode resets to zero level.
Industry’s only master volume that can be remotely controlled by an optional ACT-32HR transmitter microphone directly instead of a separate remote.
Retractable handle and rugged wheels make it amazingly easy to transport.
Built-in storage compartment for 2 handhelds or bodypack transmitters.
Wirelessly link 2 or more MA-708 systems for more sonic coverage (industry’s only MTM-92 trans-mitter module is required).
Active limiter prevents speaker damage from loud signal spikes.
Can be powered via AC power, battery or direct DC.
Weight:16kg

Max. Power Output 190 Watts
Amplifier Class D
Sensitivity Typical 89db
Maximum 108db
T.H.D. < 1%
Frequency Response 50 Hz - 18 kHz
Speaker Tweeter 1" Compression Driver
Bass 8" Woofer
Coverage H80° x V60°
Audio Inputs Wired XLR x 1, 6.3 mm (1/4 ") x 1
Wireless Up to 4 wireless microphones
Audio Player CDM-2︱DPM-3
Line-In Unbalanced RCA jack
Bluetooth Connectivity Yes
Audio Output Unbalanced line RCA jack
Extension Speaker Ø 6.3 mm (1/4 ") Phone jack
Master Volume Control Manually or Wirelessly via ACT-32HR
Controls Tone, Voice Priority & Echo on wireless mics
Storage 2 handheld or bodypack transmitters
Installation Speaker stand, flat surface or retractable handle & wheels
Power Supply AC Built-in 100 ~ 240 V AC switching power supply (Max. Power Consumption 220 W)
DC & Battery 24 - 32 V DC, 12 V / 4.5 AH rechargeable gel cell battery (MB-70 × 2) or optional MB-80 × 2
Charge Time 8 hours (automatic charging management)
Standby Time > 7 hours
Battery Indicator 4-level indicator (25/50/75/100%)
Color Black or white option
Dimensions 336 x 545 x 325mm
Weight 16.3 kg 36 lbs (MB-70 batteries included)
Wireless System (optional)
Receiver 1 or 2 MRM-70B︱MRM-70W︱MRM-80︱MRM-24 Scan & ACT sync
Max. Receiver Up to 4
Frequency Range
MRM-70B︱MRM-70W︱MRM-80 UHF 480 ~ 934 MHz (country dependent)
MRM-24 2.4 GHz
Preset Channels & Bandwidth See Accessories - Receiver Modules
Transmitters See Accessories - Receiver Modules
Microphones MM-107︱MM-39︱MM-59 Wired Dynamic Microphone
Interlinking Transmitter MTM-92
Installation Plug-in Module
Antenna Built-in
Audio Player (optional)
Model CDM-2 | DPM-3
Installation Plug-in Module
Note Refer to actual product in the event of product description discrepancy
Weight17.00 kg24.00 kg6.00 kg22.00 kg24.00 kg17.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 17.00 kg
Weight 24.00 kg
Weight 6.00 kg
Weight 22.00 kg
Weight 24.00 kg
Weight 17.00 kg