The Roadbuddy 6 is the ultra compact complete solution for voice and music and can be operated for up to 5 hours thanks to a high quality battery. A Class-D power amplifier with 200 watts peak performance powers the combination of 6″ woofer and 1″ compression driver, which reach a maximum sound pressure level of […]
The Roadbuddy 6 is the ultra compact complete solution for voice and music and can be operated for up to 5 hours thanks to a high quality battery. A Class-D power amplifier with 200 watts peak performance powers the combination of 6″ woofer and 1″ compression driver, which reach a maximum sound pressure level of 110 dB.
The Roadbuddy 6 is easily transportable and can be operated totally wirelessly using Bluetooth and a wireless microphone. The integrated FM receiver works in the license-free 863 – 865 Mhz range; the Bluetooth player plays MP3, WAV, and WMA files, and also features a USB port and an SD card slot. A handheld microphone (LDRBUD6) or a headset with Bodypack (LDRBUD6HS) and an IR remote control for the player are included.
Wired devices can, of course, also be connected to the Roadbuddy 6. To do this, two controllable Mic-Line channels with combo sockets, a monosummed stereo input with RCA jacks (Cinch) and an AUX input via 3.5 mm mini jack are provided. A Master volume and Master tone controller complete the device with a rugged plastic housing featuring a 35 mm flange adapter.
Product Type: mobile PA speaker
Type: active
Woofer Size: 6“
Woofer Size: 170 mm
Woofer Magnet: ferrite
Woofer Brand: custom made
HF Driver Size: 1“
HF Driver Size: 25.4 mm
HF Driver Magnet: ferrite
HF Driver Brand: custom made
Amplifier: class D
Power Output (RMS): 50 W
Power Output (Peak): 200 W
Frequency Response: 110 – 18,000 Hz
SPL (1 W/1 m): 92 dB
Max SPL: 110 dB
Protection Circuits: overvoltage, short circuit, limiters, DC
Controllers: AUX / MP3 Switch, High, Low, Master Volume, Mic 2 Level, Mic 1 Level, CD / Tape IN Level, Echo
Indicators: power, charge/battery status
Line Inputs: 4
Line Input Connectors: 3.5 mm jack, 2 x RCA, 2 x XLR, 6.3 mm jack
Mic Inputs: 2
Mic Input Connectors: 2 x XLR, 6.3 mm jack
Media Player
Supported Media: USB stick, Bluetooth, SD card
Supported Formats: MP3, WMA, WAV
Media Player Controls: Stop, Next track, Previous track, Repeat, Mode (Menu / Bluetooth / SD / USB), Play / Pause, Equalizer
Media Player Display Elements: backlit multifunction LC display
Wireless Unit
Radio Frequency Range: 863 – 865 MHz
Modulation Type: analogue FM
Channels: 1
Frequency Response: 50 – 17 kHz
Controllers: Power/Volume
Indicators: LED display, RF (LED), AF (LED)
RF Transmitter Power Output: 10 mW
Handheld Microphone Weight: 285 g
Handheld Microphone Material: aluminium
Specifications
Power Supply: switching power supply
Operating Voltage: 220 – 240 V / 50 Hz, 100 – 120 V / 60 Hz
Rechargeable Batteries: 12 V / 5 Ah
Cabinet Material: PP black
Cabinet Type: bass reflex
Width: 245 mm
Height: 377 mm
Depth: 205 mm
Other Features: IR remote control for Media Player, carrying handle, 36 mm tripod flange
Manual
Weight
5.60 kg
Reviews
There are no reviews yet.
Be the first to review “LD Systems Roadbuddy 6 HS – Battery Powered Bluetooth Speaker with Mixer, Bodypack and Headset” Cancel reply
Class D power amplifier with 480 watts of peak power
2 combo sockets for microphone or line inputs
3.5 mm Aux input
Master section with 2-band EQ
Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
Content
The Roadbuddy 6 is the ultra compact complete solution for voice and music and can be operated for up to 5 hours thanks to a high quality battery. A Class-D power amplifier with 200 watts peak performance powers the combination of 6" woofer and 1" compression driver, which reach a maximum sound pressure level of 110 dB.
The Roadbuddy 6 is easily transportable and can be operated totally wirelessly using Bluetooth and a wireless microphone. The integrated FM receiver works in the license-free 863 - 865 Mhz range; the Bluetooth player plays MP3, WAV, and WMA files, and also features a USB port and an SD card slot. A handheld microphone (LDRBUD6) or a headset with Bodypack (LDRBUD6HS) and an IR remote control for the player are included.
Wired devices can, of course, also be connected to the Roadbuddy 6. To do this, two controllable Mic-Line channels with combo sockets, a monosummed stereo input with RCA jacks (Cinch) and an AUX input via 3.5 mm mini jack are provided. A Master volume and Master tone controller complete the device with a rugged plastic housing featuring a 35 mm flange adapter.
Product Type: mobile PA speaker
Type: active
Woofer Size: 6“
Woofer Size: 170 mm
Woofer Magnet: ferrite
Woofer Brand: custom made
HF Driver Size: 1“
HF Driver Size: 25.4 mm
HF Driver Magnet: ferrite
HF Driver Brand: custom made
Amplifier: class D
Power Output (RMS): 50 W
Power Output (Peak): 200 W
Frequency Response: 110 - 18,000 Hz
SPL (1 W/1 m): 92 dB
Max SPL: 110 dB
Protection Circuits: overvoltage, short circuit, limiters, DC
Controllers: AUX / MP3 Switch, High, Low, Master Volume, Mic 2 Level, Mic 1 Level, CD / Tape IN Level, Echo
Indicators: power, charge/battery status
Line Inputs: 4
Line Input Connectors: 3.5 mm jack, 2 x RCA, 2 x XLR, 6.3 mm jack
Mic Inputs: 2
Mic Input Connectors: 2 x XLR, 6.3 mm jack
Media Player
Supported Media: USB stick, Bluetooth, SD card
Supported Formats: MP3, WMA, WAV
Media Player Controls: Stop, Next track, Previous track, Repeat, Mode (Menu / Bluetooth / SD / USB), Play / Pause, Equalizer
Media Player Display Elements: backlit multifunction LC display
Wireless Unit
Radio Frequency Range: 863 - 865 MHz
Modulation Type: analogue FM
Channels: 1
Frequency Response: 50 - 17 kHz
Controllers: Power/Volume
Indicators: LED display, RF (LED), AF (LED)
RF Transmitter Power Output: 10 mW
Handheld Microphone Weight: 285 g
Handheld Microphone Material: aluminium
Specifications
Power Supply: switching power supply
Operating Voltage: 220 - 240 V / 50 Hz, 100 - 120 V / 60 Hz
Rechargeable Batteries: 12 V / 5 Ah
Cabinet Material: PP black
Cabinet Type: bass reflex
Width: 245 mm
Height: 377 mm
Depth: 205 mm
Other Features: IR remote control for Media Player, carrying handle, 36 mm tripod flange
Manual
Portable Battery-powered Loudspeaker with 8" Subwoofer and 1" Driver, 2-channel XLR Output, Bluetooth Connectivity, and Removable Lithium-ion Battery
Ultra-efficient Class-D amplifier with lightweight (17.6-pound) design
Dimensions: 18 inches (H) x 9.1 inches (W) x 11.2 (D) inches
8-inch custom high-output woofer with 1-inch compression driver for full, even projection
Removable lithium-ion battery with 12 hours of life; tri-colored battery life indicator
Bluetooth connectivity with linking for a second Thump GO and easy streaming control via the Thump GO Connect App
2-channel digital mixer with XLR output and gain balance for PA use
The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driveris operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peakpower. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. An IR-remote control for the player are included.
For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input viaRCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.
The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to twohand-held transmitter microphones The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
120 W
Peak power
480 W
Frequency response
55 - 18000 Hz
SPL (1W/1m)
96 dB
Max. SPL
115 dB
Protection circuits
over-current , overload protection , short circuit
Controls
AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume
Indicators
Charge/battery status , Power
Supported media
Bluetooth , SD Card , USB stick
Supported formats
MP3 file , WAV-CD , WMA file
Media player controls
equalizer , Mode (Menu / Bluetooth /SD / USB) , Next Track , Play / Pause , Previous Track , Repeat , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
1
Line input connectors
2 x RCA , 2 x XLR , 3.5 mm jack , 6.3 mm jack
Mic inputs
2
Mic inputs
2 x XLR , 6.3 mm jack
Operating voltage
Switching power supply
Operating voltage
100 V - 120 V / 60 Hz , 220 V - 240 V AC / 50 Hz
Rechargeable batteries
12 V / 5 Ah
Cabinet material
Polypropylene
Cabinet construction
Bass Reflex
Width
415 mm
Height
525 mm
Depth
328 mm
Weight
16,5 kg
Other features
extendable handle , IR Remote for Media Player , Stand mount 36 mm , Transport casters , transport handle
The compact, flexible sound system for small events, conferences, multimedia applications, podium discussions, schools, churches, etc.
The ultra-compact battery-powered combo amplifier, measuring 30 cm x 22 cm and weighting only 5 kg, pro-vides an impressive sound pressure level (> 105 dB) and audibility, and is equipped with features unique for its size.
Standard Features :
CD/MP3 player with USB connection and volume control
1 x UHF PLL 16CHN diversity wireless unit with dynamic handheld (WS1601MD)
1 x MIC in / AUX in /AUX out
2 band equalisation
Voice priority (talkover) function
DC in (12-15 V 4A)
90-240 V AC switching power supply
Rechargeable battery type 12 V / 2.7 AH (up to 4 hours lifetime)
External output for passive speaker slave
Built in 30 W RMS amplifier
6,5'' high power co-axial loudspeaker
Optional :
ST-40 speaker stand (LDST40)
SB-21 transport bag (LDSB21)
RoadBoy 6.5 passive speaker slave (LDRB65SP)
Number of Mixer Channels
4
Number of Mic Preamps
2
EQ
3-band
Inputs
2 x XLR/TRS Combo, 1 x 1/8“
Outputs
1 x 1/4“
Power Amp
150W (RMS), 300W (Peak)
Frequency Response
65Hz-20kHz (-10 dB)
Playback
Bluetooth
Enclosure Material
ABS
Height
9.5“
Width
17.8“
Depth
9.1“
Weight
11 lbs. 5 Kgs
Manufacturer Part Number
FreePlay
Self-Amplifying Speaker 12" - 500W with Battery - 2 Wireless Microphones - Bluetooth Portable System 12"
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.