LD Systems LDSAT62G2 INSTALLATION SERIES 6,5″ Installation Monitor Passive pair 80W

User's manual

The LD Systems SAT62G2 is an extremely compact, dependable 2-way speaker for numerous installation applications. It blends unobtrusively into practically any surroundings, e.g., in bars and restaurants, retail shops or even at home.

The bass-reflex design with a 6.5" custom woofer and a 1" silk dome tweeter with wave guide provides for powerful and sonorous reproduction throughout a frequency range of 55 Hz - 20 kHz with a sound-level pressure of up to 108 dB. Thus the SAT62G2 is suitable for full-range operation and as a satellite in conjunction with a subwoofer from the LD installation series. It has a continuous power rating of 80 W. The impedance of 16 ohms permits parallel operation of eight SAT62G2 speakers on 2 ohms.

The 12 mm MDF cabinet with a rugged textured coating is available in black and white. The included mounting bracket and M6 rigging points offer extensive possibilities for mounting; a universal joint mount is available as an accessory. It is connected via spring terminals.

The AC16 is an ultra-compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive.  The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting.  The high frequency device is a 1" exit compression driver integrated into a 90° x 90° PT™ (Progressive Transition) waveguide that provides even coverage throughout the intended listening area.  The AC16 utilizes a 6.5" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 2" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket.  The AC16 is also equipped with attachment
points located on the bottom of the enclosure for a stand mount accessory.  The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.

Features:
1" Exit Compression Driver with 90° x 90° Coverage PT™waveguide.
6.5" (165 mm) LF transducer
Ultra compact enclosure
400W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket, third-party OmniMount® typebracket and stand mount accessory.
Specifications:

Frequency Range (-10 dB): 55 Hz -20 kHz
Frequency Response (±3 dB): 65 Hz -18 kHz
Power Rating:
200W Cont. Pink Noise
400W Program
800W Peak
Impedance: 16 Ohms
Coverage Pattern: 90° x 90°
Dimensions: 15" H x 7.8" W x 8.9" D (381 x 199.4 x 226.1mm)
Weight: 15.8 lbs. (7.2 kg)

The DYNACORD VL262W 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL262 is ideally suited to be used in most demanding applications. The VL262W is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two ultra-low distortion DND 6130-16 Neodymium transducers are used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Cabinet Full-Range Configuration passive 2-Way Nominal Impedance 8 ohms Rated Power RMS 300 watts Program Power 600 watts Peak Power 1200 watts SPL 2,83 V/1m 97 dB max. SPL 1m (calc. with Peak) 125 dB Freq. Range (-10 dB) 90Hz - 20Hz Coverage Angle nom. 90° x 40° Passive X-Over Frequency 2,2 kHz VCT Protections Halogen Components HIGH Ev DH 3 Order-# D353078 Components LOW 2x DND 6130-16 Order-# D366420 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensions (WxHxD) mm 217x 543x 230 Net Weight 10 kg Enclosure Material Birch Plywood

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.

Order No. D 113 127 Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish Black 2-component paint Grille Powder coated steel, acoustic foam

Behringer 1C 100W-4Ω Monitor Speakers

• Multi-purpose 2-way studio monitors ideally suited for fixed installation, multimedia, home recording studio, audio/video production and surround-sound systems
• High power handling capability (100 W / IEC268-5) produces full-range output with extremely low distortion
• Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
• Ultra-linear frequency range from 60 Hz to 23 kHz
• Phase-optimized and high-precision crossover for absolute phase linearity
• Auto-overload protection prevents tweeter damage and resets automatically
• Bracket for wall/ceiling mounting included
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Introducing the Stylish MONITOR 1C-BK Monitor Speakers from BEHRINGER

The MONITOR 1C-BK 2-way monitor speakers offer accurate sound reproduction combined with a great design to suit your fixed installations, stereo and surround applications, home recording studios as well as audio and video productions.

Each of these 100-Watt speakers has a powerful 5 ½" woofer with a lightweight cellulose cone, a high-resolution ½" tweeter plus a phase-optimized high-precision crossover for absolute phase linearity and auto-overload protection that resets automatically. The result: full-power, ultra-linear frequency response ranging from 60 Hz all the way up to 23 kHz. They come with convenient mounting brackets for easy installation.

Looking for great sound and style? The MONITOR 1C-BK speaker definitely got it!

SPECIFICATIONS
Connector type Clip terminal
Wire diameter Power capacity (prg.) 100 W (IEC 268-5)
Impedance 4 Ω
Frequency range 60 Hz to 23 kHz (-10 dB)
Nominal sound pressure level (SPL) 86 dB*W/m (program, bandwidth 100 - 5000 Hz on axis, full space)
Max. short term acoustic output 112 dB @ 1m (on axis, half space)
Tweeter ½“
Woofer 5 ½“
Crossover frequency 5000 Hz
Dimensions (H x W x D) 8.9" x 5.9" x 5.6" (225 x 150 x 142 mm)
Weight approx. 4 lbs each (1.8 kg each)

The latest addition to TOA's acclaimed speaker line, the new F-2000 F-1300and F-1000 Series of compact, high efficiency two-way speakers achieve higher performance levels for wide range frequency response and power handling.
Designed to be extremely versatile in order to meet different installation and application requirements, the new F-2000 and F-1000 Series are ideal solutions that solve increasing
needs for adaptable sound reinforcement.

• Finish in Black or White
• Weather proof version available (F-1000BTWP)
• Low impedance and 100V versions (F-1000BT)
• External rotary control for various impedance settings
• Multi position Bracket included
• Built in speaker protection

Various mounting brackets
enables a wide variety of installations, for example on walls, ceilings and speaker stands. Moreover, additional available brackets make even more demanding installations possible.

Specification| Model F-1300W
Enclosure Type| Bass-reflex type
Power Handling Capacity|30W(continous pink noise)90W (continous program)
Impedance|8Ohm
Sensitivity|87dB (1w,1m)
Frequency Responce|85-20,000Hz
Crossover Frequency|5kHz
Directivity Angle|Horizontal 90°, vertical 90°
Speaker Componenrs|Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter
Input Terminals| Push-in terminal
Finish|HIPS, white
Dimensions|130(W) × 202(H) × 131(D)mm
Weight|1.8 kg (3.97 lb) (including the supplied brackets)
Accessories|Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set
Option|Board hanger bracket:HY-CM20B,Cluster braket:HY-CL20B,Speaker stand:ST-16A