LD Systems LDEB82AG3 STINGER 8″ active PA Speaker 300W RMS

514.60 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: 4049521206689
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: LDEB82AG3 Category:
User’s manual LD Systems STINGER 8 A G3 Active 8″ 2-way bass-reflex PA speaker 2-way active 8” bass reflex PA speaker High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL Multi-purpose design for fullrange, satellite and monitor applications Application presets for quick frequency response contouring BEM optimized HF waveguide for uniform coverage […]

 

Read more

pdfUser’s manual

LD Systems STINGER 8 A G3
Active 8″ 2-way bass-reflex PA speaker

  • 2-way active 8” bass reflex PA speaker
  • High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL
  • Multi-purpose design for fullrange, satellite and monitor applications
  • Application presets for quick frequency response contouring
  • BEM optimized HF waveguide for uniform coverage
  • 8” custom woofer and BMS compression driver
  • DynX® DSP technology for distortion-free performance
  • 2 line/mic input channels with individual gain controls plus mono mix out
  • 12 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
  • Shock-resistant front grill provides maximum speaker protection
  • 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
  • Large selection of smart installation and transport accessories

 

STINGER 8 A G3
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 8 A G3 is powered by high efficiency Class D amplification with a hefty 300 watts RMS output. It drives a custom designed 8” woofer and BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 8 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 8 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker

Type
active

Low/mid driver dimensions
8 “

Woofer Size
203.2 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
2 “

Woofer voice coil (mm)
50.8 mm

Horn
BEM optimized CD Horn

HF driver dimensions
1 “

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
BMS

HF driver voice coil
1 “

HF Driver Voice Coil
25.4 mm

Amplifier
Class D

Dispersion (H x V)
90 x 50 °

RMS
300 W

Peak power
600 W

Frequency response
70 – 20000 Hz

Max. SPL (peak)
125 dB

Protection circuits
Multiband limiter , over voltage , over-current , thermal overload

Input sensitivity
-9 dBu

Controls
2 x gain , 2 x Mic/Line , mode

Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal

Line inputs
2

Line input connectors
6.3 mm Jack , XLR

Line outputs
1

Line output connectors
XLR

Operating voltage
100 – 120 V / 50 – 60 Hz or 200 – 240 V / 50 – 60 Hz (automatic switching) , Switching Power Supply

Operating Temperature
0 – 40 °C

Relative Humidity:
< 80% (non-condensing)

Cabinet material
12 mm Plywood

Cabinet surface
Polyurea

Cabinet construction
vented

Width
270 mm

Height
457 mm

Depth
290 mm

Weight
10,8 kg

 

Weight 10.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDEB82AG3 STINGER 8″ active PA Speaker 300W RMS”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDEB82AG3 STINGER 8" active PA Speaker 300W RMS removeFBT J8AW Active speaker 8" 250W removePROEL V-8-PLUS 8" 400 W Class D power amplifier with SMPS removeDAS AUDIO ACTION 8 PASSIVE SPEAKER 2 WAY 150W RMS removeJBL EON ONE COMPACT ACTIVE SPEAKER 8'' WITH BLUETOOTH removeITALIAN STAGE SPX08AUB 8’’ bi-active two way plastic speaker with Media Player remove
NameLD Systems LDEB82AG3 STINGER 8" active PA Speaker 300W RMS removeFBT J8AW Active speaker 8" 250W removePROEL V-8-PLUS 8" 400 W Class D power amplifier with SMPS removeDAS AUDIO ACTION 8 PASSIVE SPEAKER 2 WAY 150W RMS removeJBL EON ONE COMPACT ACTIVE SPEAKER 8'' WITH BLUETOOTH removeITALIAN STAGE SPX08AUB 8’’ bi-active two way plastic speaker with Media Player remove
ImageITALIAN STAGE SPX08AUB 8’’ bi-active two way plastic speaker with Media Player
SKULDEB82AG3FBT00054H00PR00175ACTION8EON ONE COMPACTE017193
Rating
Price 514.60 incl. GR VAT 409.00 incl. GR VAT 185.37 incl. GR VAT558.00 incl. GR VAT 665.00 incl. GR VAT 194.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

Only 1 left in stock

In stock

In stock

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderOnly 1 left in stockIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description8’’ bi-active two way plastic speaker with Media Player
ContentpdfUser's manual

LD Systems STINGER 8 A G3 Active 8" 2-way bass-reflex PA speaker

  • 2-way active 8” bass reflex PA speaker
  • High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL
  • Multi-purpose design for fullrange, satellite and monitor applications
  • Application presets for quick frequency response contouring
  • BEM optimized HF waveguide for uniform coverage
  • 8” custom woofer and BMS compression driver
  • DynX® DSP technology for distortion-free performance
  • 2 line/mic input channels with individual gain controls plus mono mix out
  • 12 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
  • Shock-resistant front grill provides maximum speaker protection
  • 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
  • Large selection of smart installation and transport accessories
 
STINGER 8 A G3
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 8 A G3 is powered by high efficiency Class D amplification with a hefty 300 watts RMS output. It drives a custom designed 8” woofer and BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 8 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 8 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker

Type
active

Low/mid driver dimensions
8 "

Woofer Size
203.2 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
2 "

Woofer voice coil (mm)
50.8 mm

Horn
BEM optimized CD Horn

HF driver dimensions
1 "

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
BMS

HF driver voice coil
1 "

HF Driver Voice Coil
25.4 mm

Amplifier
Class D

Dispersion (H x V)
90 x 50 °

RMS
300 W

Peak power
600 W

Frequency response
70 - 20000 Hz

Max. SPL (peak)
125 dB

Protection circuits
Multiband limiter , over voltage , over-current , thermal overload

Input sensitivity
-9 dBu

Controls
2 x gain , 2 x Mic/Line , mode

Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal

Line inputs
2

Line input connectors
6.3 mm Jack , XLR

Line outputs
1

Line output connectors
XLR

Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , Switching Power Supply

Operating Temperature
0 - 40 °C

Relative Humidity:
< 80% (non-condensing)

Cabinet material
12 mm Plywood

Cabinet surface
Polyurea

Cabinet construction
vented

Width
270 mm

Height
457 mm

Depth
290 mm

Weight
10,8 kg
 

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

Processed Active Monitor

200W+ 50W RMS - 124dB SPL

  • 200mm (8’’) custom woofer with improved efficiency and linearity
  • 200Wrms class D amplifier for LF and 50Wrms for HF.
  • Low noise toroidal transformer power supply
  • On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
  • 2 DSP preset for maximum acoustical flexibility
  • Available in white colour 8AW
Code: 37689 / 37906 White
Configuration: 2 way
Built-in amplifier LF/HF: 200/50 W RMS
Built-in amplifier peak LF/HF: 400/100 W
Frequency response: 60Hz - 20KHz -6dB
Low Frequency woofer: 8 - 1.7 coil inch
High Frequency driver: 1 -1 coil inch
Maximum SPL cont/peak: 120/124 dB
Dispersion: 90° x 60° HxV
Input impedance: 22 Kohm
Crossover Frequency: 2.5 KHz
AC Power requirements: 160 VA
Input connector: XLR - jack with loop
Power cord: 5 / 16.4 m/ft
Net Dimension (WxHxD): 255x415x245 - 10.03x16.33x9.64 mm/inch
Net Weight: 8.2 / 18.7 Kg/lb
Transport Dimension (WxHxD): 330x480x320 - 12.99x18.89x12.59 mm/inch
Transport Weight: 9.7 / 21.38 Kg/lb
PROEL V-8-PLUS 8“ Specifications :
  • System type : 2-way vented enclosure
  • High Frequency Device :1” neodimyium compression driver
  • Low Frequency Device :8” woofer with 1.5” voice coil
  • Angular Coverage : 90° H x 60° V
  • Total peak power : 400 W
  • HF Amplifier Continuous Power :50 W Class AB
  • LF Amplifier Continuous Power : 150 W Class D
  • Power Supply :SMPS
  • Processing Analog
  • Frequency Response : 70 Hz - 20 kHz
  • Max SPL :121 dB
  • Connectors IN: COMBO, LINK: XLR M
  • Controls LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT, FRONT LED selector
  • Monitor Taper : 45°
  • Flying System : 4 x M8 - top/bottom
  • Construction : Polypropylene
  • Cabinet Colour : Black
  • Handles : 1 x top
  • Mounting Pole : 1 x bottom
  • Power Supply : 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
More Specs
  • 2-way bi-amped loudspeaker system
  • 1” NEODYMIUM compression driver
  • Constant coverage 90° x 60° horn
  • High-excursion 8” woofer with 1.5” VC
  • 400 W Class D power amplifier with SMPS
  • Integrated active processor with dual LIMITER circuit
  • MIC/LINE input with 2-band EQ
  • Front LED with ON or SIGNAL/CLIP selection
  • SPL MAX: 121 dB
  • Frequency response: 70 Hz - 20 kHz
  • Ultra-lightweight reinforced polypropylene cabinet
  • Top handle for effortless transport
  • Slanted shape for the use as a stage monitor
  • Four M8 flying points
  • 7 kg total weight
  • Dimensions (W x H x D) 280 x 422 x 263 mm

Features

- 2-way, full-range system 
– 8″ bass loudspeaker 
– Compression driver
– Asymmetric enclosure design for stage monitor use
– Built-in rigging points 
– Stand mountable 

The Action 8 is a compact 2-way passive full-range loudspeaker that utilizes a 8” low frequency transducer and a full compression driver. The multi-angle cabinet is constructed of Birch plywood protected by an enviormentally friendly ISO-flex black paint finish. A rear located handle and a robust steel grille are provided. A 35 mm tripod socket allows for stand mounting.

 

Technical Data

RMS Power Handling150 W
Peak Power Handling600 W
Frequency Range (-10 dB)60 Hz-20 kHz
Nominal Impedance8 ohms
On-axis Sensitivity 1 W / 1 m92 dB SPL
Rated Peak SPL at 1 m120 dB
Dispersion80º x 80º
Enclosure MaterialBirch Plywood
Color/FinishBlack/ISO-Flex Paint
Connectors2 x NL4 Speakon
Dimensions (H x W x D)47.5 x 27.9 x 25.5 cm
18.7 x 11 x 10 in
Weight8.4 kg (18.5 lb)

 

The days of sacrificing sound system power and performance for portability are over. The JBL EON ONE Compact packs a professional speaker, a full-featured, 4-channel mixer and Bluetooth control into our most compact battery-powered PA, weighing in at just 17.6 pounds. Sound your best in seconds with premium Lexicon and dbx-inspired effects and presets that you can customize right on your phone or tablet using the JBL EON ONE Compact Control app—no engineer needed. Presenters, fitness instructors and emcees will appreciate EON ONE Compact’s ducking feature, which lowers background music volume when speech input is detected. Peer-to-peer Bluetooth lets you broadcast music playback. And with EON ONE Compact’s tool-free, swappable 12-hour battery, you’ll keep the party going long after the sun goes down. Whether you’re a singer/songwriter, DJ, presenter, fitness instructor, or you just want to enjoy amazing sound on the go, get ready to #PlayAnywhere with JBL EON ONE Compact. Features
  • 112 dB output the highest volume in its class
  • 8-inch woofer with deep low-frequency performance down to 37.5 Hz
  • Ultralight unit weighs just 17.6 pounds (8 kg)
  • Set up quickly and easily using JBL EON ONE Compact Control app presets
  • Sound your best with professional effects including EQ, reverb, chorus and delay
  • Balance your volume levels with built-in 4-channel mixer
  • Optimize your sound with 8-band output EQ, customizable via presets
  • Stream music from your phone or tablet via Bluetooth to up to four EON One Compact units
  • Operate two EON ONE Compact units in stereo mode
  • Two pro-grade preamps deliver fuller, richer sound from any microphone
  • Connect mics, instruments and playback devices with two XLR/TRS combo jacks, one 1/4-inch hi-Z guitar input and one 3.5mm (1/8-inch) aux input
  • Phantom power supports condenser mics
  • One-touch ducking feature automatically lowers music volume when speech input is detected, ensuring every word is heard clearly
  • Two USB 3.0 ports allow high-speed charging of external devices• Tool-free, swappable battery p provides up to 12 hours of playtime
  • Fast battery charging—just 2.5 hours
  • Two performance orientations: monitor and vertical; tuning and mixer displays automatically adjust
  • Headphone jack allows private monitoring for practice sessions and managing presets
  • 1/4-inch passthrough output allows system expansion with additional EON ONE Compact units
  • Convenient, built-in tilting tablet stand orients to front or back of system
  • Built-in pole mount expands configuration options
  • External battery charger option available separately
  • Ergonomic handle and even weight distribution make carrying the system a breeze
8’’ bi-active two way plastic speaker with Media Player
  • Multimedia player: Usb Flash Drive, Sd Memory Card, STEREO Bluetooth Device, Remote Control
  • Woofer 8’’ VC 1,5”
  • Driver 1’’ VC 1”
  • Line output XLR OUT + ¼” JACK OUT
  • Line input XLR IN + 2 x RCA
  • Mic input XLR IN + ¼” JACK IN
  • Rms power AB class 120 + 30 W
  • Peak power 300W
  • Frequency response 60hz-20khz
  • Peak spl 123 dB
  • Power supply AC110V/AC230V
Weight10.00 kg9.00 kg7.00 kg8.00 kg8.00 kg6 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 10.00 kg
Weight 9.00 kg
Weight 7.00 kg
Weight 8.00 kg
Weight 8.00 kg
Weight 6 kg