Content |
- 2-way passive 8” bass reflex PA speaker
- 400 watts RMS power handling
- 125 dB maximum SPL
- 12" custom woofer and BMS compression driver
- BEM optimized HF waveguide for uniform coverage
- Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
- Shock-resistant front grill provides maximum speaker protection
- 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
- Large selection of smart installation and transport accessories
STINGER 12 G3
Engineered for rock-solid reliability day in, day out this passive 2-way loudspeaker is a truly professional performer. With its multi-purpose bass reflex construction it is equally suitable for fullrange, satellite or floor monitor use in live PA systems and permanent installations. The Stinger® 12 G3 boasts a mighty 400 watts RMS power handling and 125 dB maximum sound pressure. It is loaded with a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 G3 is designed to be a real workhorse throughout. The enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type PA loudspeaker
Type passive
Low/mid driver dimensions 12 "
Woofer Size 304.8 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil 2.5 "
Woofer voice coil (mm) 63.5 mm
Horn CD horn
HF driver dimensions 1 "
HF Driver Size 25.4 mm
HF driver magnet Ferrite
HF driver brand BMS
HF driver voice coil 1 "
HF Driver Voice Coil 25.4 mm
Dispersion (H x V) 90 ° x 50 °
Load rating (RMS) 400 W
Peak power 800 W
Frequency response 58 - 20000 Hz
SPL (1W/1m) 99 dB
Max. SPL 125 dB
Impedance 8 Ohm(s)
Protection circuits HF Driver
Loudspeaker inputs 1
Speaker input connections Speakon compatible
Loudspeaker outputs 1
Speaker output connections Speakon compatible
Cabinet material 15 mm Plywood
Cabinet surface Polyurea
Cabinet construction vented
Monitor angle 54 °
Width 390 mm
Height 627 mm
Depth 377 mm
Weight 17,7 kg |
Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package. It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications. The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability. It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Freq. response (-3 dB): 60Hz - 20kHz
- Freq. range (-10 dB): 45Hz - 20kHz
- Rec. Hi-pass frequency: 45Hz
- Axial sensitivity: 97dB (1W/1m)
- Max. calculated SPL: 130dB
- Horizontal coverage: 90 degree
- Vertical coverage: 50 degree
- Power handling: 500W continuous, 2000W peak
- LF transducer: SMX2120, 12" (305mm) driver
- HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
- Crossover frequency: 1750Hz
- Nominal impedance: 8 Ohms
- Minimum impedance: 5.4 Ohms
- Connectors: (2) Neutrik Speakon NL4\'s
- Enclosure material: plywood and MDF with EVCoat
- Grille: 16 GA steel, black powdercoat, with rotatable logo
- Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
- Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
- Net weight: 44.5lbs (20.2 kg)
- Shipping weight: 50.0lbs (22.7 kg)
|
Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, μαύρο χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg. |
With the newly designed D12-3, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust high-performance professional 12" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12-3 is also ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
Cabinet Full-Range Configuration Passive 3-Way Nominal impedance 8 Ohms Rated power RMS 350 Watts Program power 700 Watts Peak power 1400 Watts SPL 2,83 V / 1m 1W / 8 Ohm 100 dB Max. SPL 1m (calculated) 128 dB Frequency range ( -10dB ) Full range 70 Hz - 20kHz Coverage angle 1 kHz -6dB 120° Conical Coverage angle 10kHz -6dB 90° * 50° Passive crossover frequency 700Hz, 4kHz Voice coil tracking protection Yes Component HIGH Electro-Voice DH-3 Order No. 353 078 Component MID DYNACORD DND 6120 Neodymium Order No. 366 302 Component LOW Electro-Voice DL12BFH Order No. 358 288 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) mm 430 x 586 x 321 Shipping weight 20 kg Net weight 19 kg Enclosure material Heavy Duty Polypropylene Finish Black Grille Powder coated steel, Acoustic foam Handles 1
|
The C5212 W is a full range extremely versatile wide-dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
Features |
---|
60° x 40° CMD (Constant Matching Design) constant directivity horn | 1.4" neodymium compression driver with 2.5" diaphragm assembly | 12" woofer with 3" voice coil | Dual-function design: built in passive crossover or external bi-amp | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) |
LICC (Low Impedance Compensated Crossover) network
Acoustical Specifications |
---|
Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | Max SPL @ 1m: | 132 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 10 | | System Sensitivity: | 99 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 500 Watt | | Peak Power Handling: | 200 Watt | | Recommended Amplifier: | 1000 | | Protections: | Dynamic | | Crossover frequencies: | 1200 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 2“HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 100 Watt AES | | Sensitivity: | 111 dB | | Woofer: | 12" woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 98 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 - Full range or Bi-Amp | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 9 x M10 inserts | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 600 / 23.62 mm/inch | | Width: | 364 / 14.33 mm/inch | | Depth: | 385 / 15.16 mm/inch | | Net Weight: | 23 / 50.7 Kg/Lbs |
|
| A fullrange enclosure in classic 12“/1" format, this cabʼs balanced sonic image, speech intelligibility, and high SPL are certainly impressive. It is the perfect satellite for the PR:O 18 S. The PR:O 12 MA also features 600 watts power circuitry and a Speakon® port for connecting a passive auxiliary cabinet.
Features
Application: Fullrange Cabinet / Satellit
Power Capacity: 400/800 Watt
Max. SPL: 128 dB
Frequency Range: 68 Hz – 19 kHz
Title PREMIUM PR:O
Product Class Passive Systems
Model PR:O 12
Info Classic full-range cabinet doubles as compact PA or part of satellite system.
Power-handling nominal (RMS) 400 W
Power-handling, peak 1200 W
Power-handling, program 800 W
Frequency response +/- 3 dB 68 Hz – 19 kHz
Frequency response -10 dB 60 Hz – 19 kHz
Nominal impedance 8 ohms
Sensitivity 1W 104 dB
Maximum SPL, @ 10% THD 128 dB
Connections 2x Speakon
LF Speaker 12"
HF Driver 1"
Horn characteristics 60° x 40° CD horn
HF protection (passive) Dyn. protective circuit
Crossover frequency 2 kHz,12 dB / oct.
Pole mount DuoTilt 3/7
Rigging points 3x M8
Handles 2, integrated
Enclosure MDF
Grille metal grille with acoustic foam
Finish acrylic painture, black
Dimensions (WxHxD) 39 cm x 57 cm x 36 cm
Weight 18,5 kg / 40.8 lbs. |
Reviews
There are no reviews yet.