LD Systems LDEB122AG3 STINGER 12 A G3 Active speaker 500W

827.08 incl. GR VAT

Available on backorder

EAN: 4049521206733
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: LDEB122AG3 Category:
2-way active 12” bass reflex PA speaker High-efficiency 500 watts RMS digital power stage and 132 dB max. SPL Multi-purpose design for fullrange, satellite and monitor applications Application presets for quick frequency response contouring BEM optimized HF waveguide for uniform coverage 12” custom woofer and BMS compression driver DynX® DSP technology for distortion-free performance 2 […]

 

Read more

  • 2-way active 12” bass reflex PA speaker
  • High-efficiency 500 watts RMS digital power stage and 132 dB max. SPL
  • Multi-purpose design for fullrange, satellite and monitor applications
  • Application presets for quick frequency response contouring
  • BEM optimized HF waveguide for uniform coverage
  • 12” custom woofer and BMS compression driver
  • DynX® DSP technology for distortion-free performance
  • 2 line/mic input channels with individual gain controls plus mono mix out
  • 15 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points

Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 12 A G3 is powered by high efficiency Class D amplification with a mighty 500 watts RMS output. It drives a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.

 

Product type
PA loudspeaker

Type
active

Low/mid driver dimensions
12 ”

Woofer Size
304.8 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
2.5 ”

Woofer voice coil (mm)
63.5 mm

Horn
CD horn

HF driver dimensions
1 ”

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
BMS

HF driver voice coil
1 ”

HF Driver Voice Coil
25.4 mm

Amplifier
Class D

Dispersion (H x V)
90 x 50 °

RMS
500 W

Peak power
1000 W

Frequency response
58 – 20000 Hz

Max. SPL (peak)
131 dB

Protection circuits
Multiband limiter , over voltage , over-current , thermal overload

Input sensitivity
-5 dBu

Controls
2 x gain , 2 x Mic/Line , mode

Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal

Line inputs
2

Line input connectors
6.3 mm Jack , XLR

Line outputs
1

Line output connectors
XLR

Operating voltage
100 – 120 V / 50 – 60 Hz or 200 – 240 V / 50 – 60 Hz (automatic switching)

Operating Temperature
– 40 °C

Relative Humidity:
<80% (non-condensing)

Cabinet material
15 mm Plywood

Cabinet surface
Polyurea

Cabinet construction
vented

Monitor angle
54 °

Width
390 mm

Height
627 mm

Depth
377 mm

Weight
19,4 kg

 

Weight 20.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDEB122AG3 STINGER 12 A G3 Active speaker 500W”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDEB122AG3 STINGER 12 A G3 Active speaker 500W removeJBL VP7212/95DPC Compact Active Speaker 875 Watts removeDAS AUDIO Avant 12A ACTIVE SPEAKER 12'' 600W removeTURBOSOUND iX12 12'' Active PA Speaker 1000W RMS removeELECTRO VOICE Xf 2 WAY LOUDSPEAKER 2x2'' 600W, 2X3'' 150W removeTurbosound MILAN 12 POWERED LOUDSPEAKER 1100W remove
NameLD Systems LDEB122AG3 STINGER 12 A G3 Active speaker 500W removeJBL VP7212/95DPC Compact Active Speaker 875 Watts removeDAS AUDIO Avant 12A ACTIVE SPEAKER 12'' 600W removeTURBOSOUND iX12 12'' Active PA Speaker 1000W RMS removeELECTRO VOICE Xf 2 WAY LOUDSPEAKER 2x2'' 600W, 2X3'' 150W removeTurbosound MILAN 12 POWERED LOUDSPEAKER 1100W remove
Image
SKULDEB122AG3VP 7212/95DPCAVANT12AE007898004432E005676
Rating
Price 827.08 incl. GR VAT 4,190.00 incl. GR VAT1,853.79 incl. GR VAT 570.00 incl. GR VAT6,463.00 incl. GR VAT 491.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • 2-way active 12” bass reflex PA speaker
  • High-efficiency 500 watts RMS digital power stage and 132 dB max. SPL
  • Multi-purpose design for fullrange, satellite and monitor applications
  • Application presets for quick frequency response contouring
  • BEM optimized HF waveguide for uniform coverage
  • 12” custom woofer and BMS compression driver
  • DynX® DSP technology for distortion-free performance
  • 2 line/mic input channels with individual gain controls plus mono mix out
  • 15 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points

Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 12 A G3 is powered by high efficiency Class D amplification with a mighty 500 watts RMS output. It drives a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.

 

Product type
PA loudspeaker

Type
active

Low/mid driver dimensions
12 "

Woofer Size
304.8 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
2.5 "

Woofer voice coil (mm)
63.5 mm

Horn
CD horn

HF driver dimensions
1 "

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
BMS

HF driver voice coil
1 "

HF Driver Voice Coil
25.4 mm

Amplifier
Class D

Dispersion (H x V)
90 x 50 °

RMS
500 W

Peak power
1000 W

Frequency response
58 - 20000 Hz

Max. SPL (peak)
131 dB

Protection circuits
Multiband limiter , over voltage , over-current , thermal overload

Input sensitivity
-5 dBu

Controls
2 x gain , 2 x Mic/Line , mode

Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal

Line inputs
2

Line input connectors
6.3 mm Jack , XLR

Line outputs
1

Line output connectors
XLR

Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)

Operating Temperature
- 40 °C

Relative Humidity:
<80% (non-condensing)

Cabinet material
15 mm Plywood

Cabinet surface
Polyurea

Cabinet construction
vented

Monitor angle
54 °

Width
390 mm

Height
627 mm

Depth
377 mm

Weight
19,4 kg

 


Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 12-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount

Specifications:
Frequency Response (+/-3 dB): 65 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 55 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 134 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2262FF, 304 mm (12 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 9 M10 Fittings + 2 M6 Fittings, 35 mm pole mount
socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 533 x 358 x 334 mm
21.0 x 14.1 x 13.1 in
Net Weight: 21.3 kg (47 lb)

Features

- Compact multi-purpose system with monitor position
– Ultra lightweight 3rd generation Class D amplifier
– Switch-mode power supply
– Reduced size and weight
– Pole mount socket
– Rigging points

The Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of  transportation and road worthiness.

The Avant 12A offers a multi-angle enclosure which allows it to be used in stage monitor applications as well as a compact P.A. system.

The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about?

The 12AV4 loudspeaker designed and built by D.A.S. provides accurate low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2" titanium diaphragm-features hard to find on other systems in this market segment.

 

Technical Data

Nominal LF Amplifier Power500 W
Nominal HF Amplifier Power100 W
Frequency Range (-10 dB)60 Hz-20 kHz (EQ Main)
Rated Peak SPL at 1 m133 dB
Dispersion80ºH x 50ºV rotatable horn
Enclosure MaterialPlywood
Color/FinishBlack/Paint
ConnectorsInput: Female XLR-Jack combo
Loop Thru: XLR
AC Input Male IEC
AC Requirements115 V, 50/60 Hz
230 V, 50/60 Hz
Current Draw (1/3 power @ 230 V)1.7 A
Dimensions (H x W x D)71.3 x 36.2 x 39.7 cm
28 x 14.3 x 15.6 in
Weight22 kg (48 lb)

 

The Turbosound iX12 Active PA Speaker is the perfect loudspeaker for a variety of professional and portable applications. Featuring a 12\'\' low-frequency woofer and a 1\'\' titanium dome compression tweeter, the Turbosound iX12 delivers accurate audio reproduction with exceptional transient responses and crystal-clear highs. The iX12 speaker is equipped with a 3-channel digital mixer which provides DSP presets, Bluetooth connectivity and XLR/TRS combo input connectors. Complete with a KLARK TEKNIK amplifiers and a durable moulded enclosure, the Turbosound iX12 active speaker offers intuitive setup and reliable operation.

Built-In Digital Mixer

The Turbosound iX12\'s onboard 3-channel digital mixer features balanced and unbalanced TRS/XLR combo input connectors, allowing you to connect a variety of sources such as dynamic microphones and line-level instruments. The intuitive control interface has an LCD display and a rotary push-encoder, providing you with complete control over DSP functions and recallable gain. All of these settings can also be controlled remotely using the free iOS app, providing you with the freedom to adjust any setting from your iPhone/iPad.

Features
  • 2-way full range, powered loudspeaker for portable PA applications
  • KLARK TEKNIK class-D amplifier with 1000-watt output
  • Comprehensive remote control via iOS devices
  • High quality Bluetooth stereo audio streaming
  • Onboard 3-channel digital mixer with gain setting recall
  • DSP presets for application type and speaker positioning
  • 12" low frequency driver with low mass voice coil for improved transient response
  • Titanium dome 1" compression driver for extended high frequency reproduction
  • Intuitive single rotary control user interface with LCD display for ease of navigation
  • Durable lightweight moulded enclosure
  • Rugged powder coated perforated steel mesh grille
  • Dual angle pole mount for optimum audience coverage
  • Designed and engineered in the U.K
Specifications
  • Frequency Response: 50Hz - 20kHz, ±3dB
  • Nominal Dispersion: 80° x 60° (H x V)
  • Sound Pressure Level: 125dB
  • Crossover Type: Active
  • Low-Frequency Driver: 12\'\' Woofer
  • High-Frequency Driver: 1\'\' Titanium Dome Compression Driver
  • Amplifier Power: 1000W
  • Amplifier type: KLARK TEKNIK
    • Low-Frequency: Class-D
    • High-Frequency: Class-AB
  • Input Connectors: 2 x Combo XLR/Jack
  • Input Impedance: 16k Ohms, Unbalanced / 33k Ohms, Balanced
  • Output Connector: XLR
  • Bluetooth: 4.0 Dual Mode
  • Bluetooth Range: 35m (Without Interference)
  • Control: Rotary Push-Encoder
  • EQ: Bass and Treble
  • Crossover: High-Pass L-R 24dB/Oct
  • Display: LCD 128 x 32, Blue, Backlit
  • Limiter: Independent HF and LF
  • Power Consumption: 80W
  • Dimensions: 609mm x 370mm x 370mm / 24\'\' x 14.5\'\' x 14.5\'\' (H x W x D)
  • Weight: 19.4kg / 42.8lbs

Two-way dual-12-inch horn-loaded MB/HF system. Adds long-throw "punch" to the capabilities of the medium and short-throw X-Series™ systems. Operates above 125 Hz, with low-frequency augmentation provided by full-range or low-frequency system. Dual, vertically stacked Hf drivers mount on a "twin format" 40° x 20° horn. Specifications Frequency Response (-3dB) 170 - 16000 Hz Frequency Response (-10dB) 125 - 20000 Hz Max. SPL / 1m (calc); full space 145 dB Coverage (nominal -6dB) H° 40 ° Coverage (nominal -6dB) V° 20 ° Rotatable Horn No Mid Frequency Power Handling (continuous/program/peak) 600/1200/2400 Watts High Frequency Power Handling (continuous/program/peak) 150/300/600 Watts MF Transducer (2) ND12A HF Transducer (2) ND6-16 MF Nominal Impedance 8 Ohms HF Nominal Impedance 8 Ohms Color Black Directivity Index 17.2 dB Flying Optional Flying Yes Input Connections 2 Neutrik® NL8 Outdoor No Chassis Size 12 inches Internal Crossover No Speaker Type Mid-High, Two-Way Weight Net 87.1 kg ( 192.02 lbs ) Dimensions (HxWxD) 914 x 584 x 759 mm (35.98" x 22.99" x 29.88“)


Dimensions (H x W x D) 620 x 394 x 330 mm (24.4 x 15.5 x 13“) Net Weight 20.5 kg (45.1 lbs) Components 1 x 12" (305 mm) LF driver, 1 x 1" (25 mm) HF compression driver Frequency Response 50 Hz - 18 kHz ±3 dB Dispersion 90° H x 60° V @ -6 dB points Calculated Max SPL 128 dB peak Construction Injection-moulded polypropylene enclosure. Recessed carrying handles. Integral dual-angle pole mount socket Grille Powder coated galvanised perforated steel mesh with foam backing Connectors Mic/Line input: combo jack/female XLR wired pin 2 hot Mix out: male XLR wired pin 2 hot IEC mains connector with integrated fuseholder with integrated fuseholder Rigging (6) M10 threaded internal rigging points Spares & Accessories LS-1229 12" (305 mm) Replacement LF loudspeaker RC-1229 Recone kit CD-125 1" (25 mm) HF compression driver RD-125 HF diaphragm MG-M12 Metal grille PB-55 Wall bracket, pole mount fixing EB-10 Shoulder eyebolt
Weight20.00 kg21.30 kg22.00 kg19.40 kg87.10 kg20.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 20.00 kg
Weight 21.30 kg
Weight 22.00 kg
Weight 19.40 kg
Weight 87.10 kg
Weight 20.50 kg