Content | - 2-way active 12” bass reflex PA speaker
- High-efficiency 500 watts RMS digital power stage and 132 dB max. SPL
- Multi-purpose design for fullrange, satellite and monitor applications
- Application presets for quick frequency response contouring
- BEM optimized HF waveguide for uniform coverage
- 12” custom woofer and BMS compression driver
- DynX® DSP technology for distortion-free performance
- 2 line/mic input channels with individual gain controls plus mono mix out
- 15 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 12 A G3 is powered by high efficiency Class D amplification with a mighty 500 watts RMS output. It drives a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker
Low/mid driver dimensions
12 "
Woofer voice coil (mm)
63.5 mm
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Frequency response
58 - 20000 Hz
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Controls
2 x gain , 2 x Mic/Line , mode
Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal
Line input connectors
6.3 mm Jack , XLR
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Operating Temperature
- 40 °C
Relative Humidity:
<80% (non-condensing)
Cabinet material
15 mm Plywood
Cabinet construction
vented
|
Two-way dual-12-inch horn-loaded MB/HF system. Adds long-throw "punch" to the capabilities of the medium and short-throw X-Series™ systems. Operates above 125 Hz, with low-frequency augmentation provided by full-range or low-frequency system. Dual, vertically stacked Hf drivers mount on a "twin format" 40° x 20° horn. Specifications Frequency Response (-3dB) 170 - 16000 Hz Frequency Response (-10dB) 125 - 20000 Hz Max. SPL / 1m (calc); full space 145 dB Coverage (nominal -6dB) H° 40 ° Coverage (nominal -6dB) V° 20 ° Rotatable Horn No Mid Frequency Power Handling (continuous/program/peak) 600/1200/2400 Watts High Frequency Power Handling (continuous/program/peak) 150/300/600 Watts MF Transducer (2) ND12A HF Transducer (2) ND6-16 MF Nominal Impedance 8 Ohms HF Nominal Impedance 8 Ohms Color Black Directivity Index 17.2 dB Flying Optional Flying Yes Input Connections 2 Neutrik® NL8 Outdoor No Chassis Size 12 inches Internal Crossover No Speaker Type Mid-High, Two-Way Weight Net 87.1 kg ( 192.02 lbs ) Dimensions (HxWxD) 914 x 584 x 759 mm (35.98" x 22.99" x 29.88“)
|
With a 12" woofer and a 1" titanium compressor driver, the EKX-12P from Electro-Voice is a powered two-way Loudspeaker providing 1500W of Class D amplification. It\'s suitable in live-music scenarios, lecture setups, and generalized nightclub use. The loudspeaker\'s integrated QuickSmartDSP technology can be modified using the LCD-based menu-navigation screen and the single-knob user interface. Four presets of DSP are provided for various settings—Music, Live, Speech, and Club—though EQ manipulation and five user-programmable presets are all adjustable. Visual monitoring of your limiter, input metering, and master volume allow you to gain-stage properly.
Its on-board amplifier can deliver up to 132 dB of SPL, its frequency response ranges from 50 Hz to 20 kHz at -10 dB, and its intelligent thermal-management system controls fan-speed by means of multiple built-in sensors, thus reinforcing the durable performance of this speaker (whose 15mm wooden enclosure is fronted by an 18 AWG steel grille). Electro-Voice\'s SST waveguide design provides measured and dependable coverage of a given area, and the speaker\'s Cardioid Control Technology allows you to steer output towards the audience while reducing levels up to 35 dB on stage when multiple subwoofers are employed.
For convenience in mounting and transport, this loudspeaker boasts eight M10 threaded mounting points, aluminum pole mounts, and metallic handles; as such, it can be mounted on a tripod stand, on a pole above your subwoofer, or utilized as a floor monitor for artists on stage. You can feed the speaker sweet, sweet audio via RCA inputs or XLR/1/4" combination jacks, and you can link it to other monitors via an XLR link-output.
Connectors |
1 x stereo RCA input 2 x XLR/TRS combo jack 1 x XLR, link output |
Coverage |
Nominal: -6 dB Horizontal: 90° Vertical: 60° |
Crossover Frequency |
1.7 kHz |
Enclosure Material |
15 mm Plywood with EVCoat |
Frequency Response |
-10 dB: 50 Hz - 20 kHz -3 dB: 60 Hz - 18 kHz |
Grille |
18 AWG steel with powdercoat |
Transducer |
HF: DH-1M 1" titanium compression driver LF: EVS-12M 12" (300 mm) |
Maximum SPL |
132 dB 132 dB maximum SPL is measured at 3.3\' / 1 m using broadband pink noise at maximum output |
Power Consumption |
1.8 A Current rating is 1/8 power |
Power Rating |
1500 W |
Suspension |
8 x M10 threaded mounting points |
Dimensions |
23.9 x 14.76 x 14.02" / 60.7 x 37.5 x 35.6 cm |
Weight |
41.45 lb / 18.8 kg |
|
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 100W Class D
Frequency Range 55Hz-20kHz (-10dB)
Crossover Frequency 1.5kHz
Maximum Peak SPL 124dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 50 Degrees
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly, Wedge
Inputs 1 x XLR
Outputs 1 x XLR
Height 24“
Width 15.2“
Depth 15“
Weight 50 lbs.
|
Dimensions (H x W x D) 620 x 394 x 330 mm (24.4 x 15.5 x 13“)
Net Weight 20.5 kg (45.1 lbs)
Components 1 x 12" (305 mm) LF driver, 1 x 1" (25 mm) HF compression driver
Frequency Response 50 Hz - 18 kHz ±3 dB
Dispersion 90° H x 60° V @ -6 dB points
Calculated Max SPL 128 dB peak
Construction Injection-moulded polypropylene enclosure. Recessed carrying handles. Integral dual-angle pole mount socket
Grille Powder coated galvanised perforated steel mesh with foam backing
Connectors
Mic/Line input: combo jack/female XLR wired pin 2 hot
Mix out: male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder with integrated fuseholder
Rigging (6) M10 threaded internal rigging points
Spares & Accessories LS-1229 12" (305 mm) Replacement LF loudspeaker
RC-1229 Recone kit
CD-125 1" (25 mm) HF compression driver
RD-125 HF diaphragm
MG-M12 Metal grille
PB-55 Wall bracket, pole mount fixing
EB-10 Shoulder eyebolt
| Product Features:
- High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
- High-performance MP3 player included to play audio files via USB stick
- “Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
- 2-channel mixer with individual Mic/Line inputs (XLR and 1/4" TRS), Volume controls and Clip LEDs
- Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
- state-of-the-art 1" phenolic-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Additional Line output allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning:
- - Stand mounting with 35-mm pole socket
- - Tilts on its side for use as a floor monitor
- Ergonomically shaped handles for easy carrying and setup
- High-quality components and exceptionally rugged construction ensure long life
User's Manual |
Reviews
There are no reviews yet.