TANNOY REVEAL-402 Studio Monitor (Piece)

122.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Custom tweaked by Tannoy’s in-house speaker guru, Dr. Paul Mills, the active cross-over filters of Reveal 402 have absolutely impeccable timing. This produces the ultimate sweet spot so that you can move around in your workspace without losing the stereo imaging of your mix – as well as invite people to sit in with you […]

 

Read more

Custom tweaked by Tannoy’s in-house speaker guru, Dr. Paul Mills, the active cross-over filters of Reveal 402 have absolutely impeccable timing.

This produces the ultimate sweet spot so that you can move around in your workspace without losing the stereo imaging of your mix – as well as invite people to sit in with you during mixing sessions.

Type Studio monitor nearfield

Woofer 4”

Midrange –

Tweeter ¾˝ Soft Dome

Amplifiers Power 50 Watts

Input/Output Plugs XLR, ¼’ Jack, Mini Jack

Frequency Response 56 Hz -48 kHz

Εqualizer -1.5 dB HF Cut

Dimensions (W x H x D) 147 x 240 x 212 cm

Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “TANNOY REVEAL-402 Studio Monitor (Piece)”

Your email address will not be published. Required fields are marked *

Quick Comparison

TANNOY REVEAL-402 Studio Monitor (Piece) removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeMACKIE HR624mk2 Monitor - Active Reference Monitor removeADAM A77X Active Studio Monitor 100W removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeADAM A3X Active Studio Monitor 25W remove
NameTANNOY REVEAL-402 Studio Monitor (Piece) removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeMACKIE HR624mk2 Monitor - Active Reference Monitor removeADAM A77X Active Studio Monitor 100W removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeADAM A3X Active Studio Monitor 25W remove
Image
SKUE008387Twin6 Be149.018A77XCMS 50A3X
Rating
Price 122.00 incl. GR VAT1,675.00 incl. GR VAT 499.00 incl. GR VAT 1,175.00 incl. GR VAT 565.00 incl. GR VAT 365.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

In stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Custom tweaked by Tannoy's in-house speaker guru, Dr. Paul Mills, the active cross-over filters of Reveal 402 have absolutely impeccable timing.

This produces the ultimate sweet spot so that you can move around in your workspace without losing the stereo imaging of your mix - as well as invite people to sit in with you during mixing sessions.

Type Studio monitor nearfield

Woofer 4''

Midrange -

Tweeter ¾˝ Soft Dome

Amplifiers Power 50 Watts

Input/Output Plugs XLR, ¼' Jack, Mini Jack

Frequency Response 56 Hz -48 kHz

Εqualizer -1.5 dB HF Cut

Dimensions (W x H x D) 147 x 240 x 212 cm

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 115dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 2x150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Visualization and control :

Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Woofer : 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker
Tweeter : TB871, Focal inverted dome tweeter in Beryllium
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight : 30.8lb (14kg)

 

Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB

Benefit: Sound true to actual recording

Benefit: Any pair of speakers is a matched pair

Active Technology

2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W

Benefit: Precise dividing slope, correct phase, and low distortion

Benefit: Minimal chance of speaker damage due to overdriving

Servo Loop Woofer Technology

Electronic control and dampening

Benefit: Speaker output is as true to incoming signal as possible

Frequency Response Controls

80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)

Benefit: Excellent response in a variety of acoustic environments

Wide Sweet Spot

Custom-designed die-cast wave guide

Benefit: User hears the same thing across a wider range of motion

3-Position Acoustic Space Switch

Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement

Benefit: As close-to-flat performance as possible regardless of placement in room

Applications
Professional Recording Studios

Home and Project Studios

Film (THX) and Post Production Studios

Home Theater Installations

 

Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

Subwoofer
Number1 / 1
Basket Ø7" (175 mm) / 7" (175 mm)
Voice coil Ø1.5" (38 mm) / 1.5" (38 mm)
Cone materialCarbon / rohacell / glass / Carbon / rohacell / glass
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
LocationRear
General data
PanelFront
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥114 dB
Max. peak≥122 dB
Crossover frequencies400 / 3000 Hz
Input impedance30 KOhm
Weight28.2 lb (12,8 kg)
Magnetically shieldedOptional
Height x Width x Depth9.5" (235 mm) x 21" (530 mm) x 11" (280 mm)
Warranty5 Years

 

The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.

 

Specifications
Frequency response (+/-3dB) : 55Hz - 28kHz
Maximum SPL : 107dB SPL (peak @ 1m)

Input :

Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA

HF amplifier stage : 50W RMS, class AB
LF amplifier stage : 80W RMS, class AB

Electric supply :

Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord

Adjustment :

- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch

Indicators :

Power ON / OFF LED
Standby / ON LED
Audio Clip LED

Woofer : 5" Focal drive unit, Polyglass cone
Tweeter : Aluminum/Magnesium inverted dome Focal tweeter
Shielding : Integral by cancellation magnet
Construction : Reinforced and damped Aluminum cabinet

Finish :

Black powder cabinet

Dimensions with spikes : 289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“)
Dimensions with table stand : 299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“)
Net weight : 7.7kg - (17lb)

 

PRICE PER UNIT

The smallest big sound ever...

With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction.

A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly.

Stereolink

A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.

This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.

Controls and Connectors

The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.

Review: "Highly recommended“

"Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“
(Jon Chappell, Harmony Central, 03/10)

Review: "...one of the best compact monitors“

"ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10)

Mid-Woofer
Number1
Basket Ø4.5" (120 mm)
Voice coil Ø1" (25 mm)
Cone materialCarbon Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypeA/B
Amp. power RMS / music25 W / 40 W
Tweeter1
TypeA/B
Amp. power RMS / music25 W / 40 W
Control panel
Input Sensitivity-∞ to +14 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response60 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.8 %
Long term output≥98 dB
Max. peak≥106 dB
Crossover frequencies2800 Hz
Input impedance10 KOhm
Weight10.1 lb (4,6 kg)
Magnetically shieldedNo
Height x Width x Depth10" (252 mm) x 6" (150 mm) x 7.5" (185 mm)
Warranty5 Years
Delivery contents

Cinch-cable, Power cord, Manual

Weight2.00 kg14.00 kg12.25 kg13.00 kg7.70 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 14.00 kg
Weight 12.25 kg
Weight 13.00 kg
Weight 7.70 kg
Weight 5.00 kg