Content |
Features at a glance - Supports Sennheiser wireless system mics and transmitters (DR-10CS)
- Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
- Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration - 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between DR-10C units using the infrared transmission function
- Firmware can be updated using a microSD card
- Belt clip included
- Silicon band that can be used to attach the unit to a transmitter included
- Custom case for storing the unit and accessories included
- RoHS-compliant product
|
- 2-channel field recorder in Stereo or Mono on Compact Flash or Micro drive cards
- Light weight with rigid chassis
- FAT32 file system & BWF Stereo file format + MP3 recording/playback
- Built-in Stereo microphone for quick memo recording
- 2 x XLR mic inputs with phantom power to accept professional microphones
- High resolution recording at 24bit 96kHz
- Mic Trim for accurate recording level adjustment
- Automatic Level Control (ALC - OFF/ALC/LIMITER)
- Hi-Pass Filter
- Backlit 132 x 64 dot matrix LCD display
- Two-hour capacity on 4GB CF card with Stereo 24 Bit/96 kHz resolution
- Pre-record buffer (2 secs) ensures full-take recording with no inadvertent loss
- Auto File Closing (the recording file auto-closes every minute to secure recorded data)
- Auto Shut-off function when the input power becomes abnormally low to save data
- Convenient file naming mode: DATE or TAKE
- 4 hours operation on 4 x AA Alkaline / Ni-MH batteries
- 8 hours operation possible with optional rechargeable NiMH battery pack
- Wired remote controller with microphone attachment belt
- USB 2.0 data transfer to Mac or PC computers for further editing and post-production
- Comes with 128MB CF card, AC adapter, dedicated shoulder belt and carrying pouch
• Recording / Playback / General
Recording Medium: Compact Flash Card
Recording Times: see chart above
File Formats: BWF (Broadcast Wave Format), MP3 (MPEG Layer-3)
Sampling Frequency: 44.1 / 48 / 88.2 / 96 kHz
Quantization: 16-bit linear (44.1 / 48 kHz);
24-bit linear (44.1 / 48 / 88.2 / 96);
MP3 192kbps (stereo)
Recording Tracks: 2 tracks (stereo)
Simultaneous Recording: 2 tracks (stereo)
Rec/Play Frequency: 20Hz-20kHz ±2dB (FS 44.1/48kHz); 20Hz-40 kHz ±3dB (FS 88.2/96kHz)
S/N: (ADC-DAC, 24bit, 48kHz) - Line: (Input Gain: +4dBu) 95dB (typical) - Mic: (Input Gain: -60dBu) 85dB (typical)
Dynamic Range: 95dB (typical) (ADC-DAC, 24bit, 48kHz)
THD: (ADC-DAC, 24it, 48kHz) - Line:
Channel Separation: more than 90dB (at 1kHz 0dB) (24bit, -20BFS, 48kHz)
Reference Level: -12dBFS
Locate Memory: 99 Cue points per file
Battery Operation Time: approx. 4 hours (4 x AA Alkaline / Ni-MH AA cells); approx. 8 hours (optional Ni-MH battery pack) | • Input / Output
Analogue In (L/R) Connector: XLR-Jack (1/4“) Combo Type
Mic In Connector: XLR (balanced, 2-pin hot)
Line In Connector: Jack (1/4“) (unbalanced)
Input Impedance: > 10k ohm
Reference Input Level: -10dBV
Maximum Input Level: +2dBV
Input Impedance: > 6k ohm
Reference Input Level: -50dBu to -10dBu
Maximum Input Level: +2dBu
Phantom: P48
Monitor Out Connector: RCA Phono (unbalanced)
Load Impedance: > 10k ohm
Reference Output Level: -10dBV
Phones Connector: Stereo Mini Jack (3.5mm)
Load Impedance: > 32 ohm
Maximum Output Level: 15 + 15mW (32 ohm)
USB 2.0 (for PC) Connector: Series "B” Receptacle
Built-in Speaker
Maximum Output: 300mW
| • Physical
Dimensions: 57(H) x 206(W) x 132(D) mm
Weight: 0.8kgs (w/o battery)
Included Accessories: CF card (128MB), AC Adaptor, shoulder strap, remote control and carry pouch | Pedigree Portable Field Recorder
The FR-2LE is a compact field memory recorder for professional use offering 24bit 96kHz recording in the industry standard BWF file format. It has a good pedigree given Fostex's previous success with their DAT portables (PD2 & PD4) and latterly with their solid state FR-2 and its optional full timecode facility.
Now with their latest FR-2LE, they have an even more compact offering for high quality field recording, interview recording (MP3 mode also available), or simple film/broadcast audio recording.
The FR-2LE is equipped with two professional phantom powered XLR microphone inputs (XLR-Jack combo) complete with precise control over the recording level. It features a 1 take = 1 file recording system which eliminates overwrites and its 2 second ʽpre-recordʼ buffer means there should never be a missed take or lost soundbite. Thereʼs also an MP3 mode and built-in stereo microphone.
Feature rich, elegant in operation, good pedigree - the new FR-2LE looks assured of success.
MAIN FEATURES
• Long Battery Life
The FR-2LE can run for up to 4 hours on 4 x AA Alkaline batteries and up to 8 hours with the optional NiMH BATPACK battery pack. A choice of two BATPACK chargers are also available - one for the mains and one that also charges your pack from a 12V car outlet.
• Extended recording times
Over 6 hours @ 16bit 44.1kHz recording on an 4Gb CompactFlash card.
• Professional inputs
Dual XLR inputs (XLR-Jack combo) with top quality microphone pre-amps, trim control and phantom power. Analogue out is provided on phono (RCA) connectors.
• BWF or MP3 recording
Record up to 24bit 96kHz audio.
• Tough construction
Manufactured from high-grade materials and specifically designed for professional location recording.
• Fail Safe Recording
In addition to a 1 take = 1 file system to eliminate overwrites, the FR-2LE also features Auto File Closing which closes files at one minute intervals, thus preserving the data in the event of a power failure.
• USB 2.0
The USB 2.0 port allows direct connection to PC and MAC for easy file transfer.
| Recorder section
Number of tracks:
2 tracks
2 tracks simultaneous playback
2 tracks simultaneous recording
Recording formats:
Compressed audio format
MP2 format (extension .mp2)
48 kHz@128, 192, 256, 320 kbps
MP3 format (extension .mp3)
44.1 kHz@128, 192, 256, 320 kbps
PCM audio format
WAV format (extension .wav), BWF compliant
44.1 kHz @ 16/24-bit, 48 kHz @ 16/24-bit
88.2 kHz @ 24-bit, 96 kHz @ 24-bit
176.4 kHz @ 24-bit, 192 kHz @ 24-bit
1-bit audio format
2.8 MHz @ 1-bit
DSDIFF format (extension .dff), DSF (extension .dsf), WSD (extension .wsd)
Recording Time:
Maximum 6 hours @ 44.1 kHz/16-bit (for 4GB memory card)
Maximum continuous recording 6 hours
Number of projects:
Recognizes a maximum of 400 projects of each date folder
Mark points:
100 points per project *No mark names
USB functionality:
Connect to computer via USB 2.0, usable as FAT32 USB removable drive
Song editing:
Rename, Delete, Protect
Tuner
Temperament:
Equal temperament, chromatic tuner
Range (sine wave):
27.50 Hz – 1,318.5 Hz (A0 - E6)
Reference pitch:
A = 435 – 445 Hz
Memory Card (SD)
Supported cards:
SD and SDHC cards with a capacity of 512MB-32GB
(SDHC card of class 4 or higher recommended)
General
Display:
128 x 128 pixel LCD with backlight
Power supply:
AA/LR6 alkaline battery x 2;
AA nickel-metal hydride battery x 2;
USB bus power
Power consumption:
1.5W
Dimensions:
(W x D x H): 2.52" x 4.72" x 0.9“
Weight:
4.94 oz. (not including a memory card and batteries)
Main specifications
Frequency response:
20 Hz – 20 kHz ±1.5 dB (MP2/MP3)
10 Hz – 20 kHz ±1.5 dB @Fs44.1 kHz/48 kHz
10 Hz – 40 kHz ±1.5 dB @Fs88.2 kHz/96 kHz/176.4 kHz/192 kHz
10 Hz – 100 kHz (1-bit)
S/N:
90 dB (typical) @IHF-A
THD+N:
0.018% (typical) 20 Hz – 20 kHz
A/D conversion:
2.8224 MHz (1-bit), 24-bit (PCM)
D/A conversion:
2.8224 MHz (1-bit), 24-bit (PCM)
Mic
Connector:
3.5 mm stereo mini phone jack (switchable to Plug-in-Power)
Input impedance:
10k ohms
Nominal level:
-39 dBV
Maximum level:
-27 dBV
Line In
Connector:
3.5 mm stereo mini phone jack
Input impedance:
75k ohms
Nominal level:
-10 dBV
Maximum level:
+2 dBV
Phones
Connector:
3.5 mm stereo mini phone jack
Maximum level:
20 mW+20 mW @ 16 ohms
USB
Connector:
Type mini-B
Format:
USB 2.0 compliant, USB mass storage class
Supported operating systems:
Windows 2000, or later; Mac OS X 10.4 or later
Included items
Install CD (“AudioGate” audio file conversion application)
AudioGate (v2.0) System Requirements
Windows
Supported OS:
Microsoft Windows XP Home Edition/Professional Edition Service Pack 3 or later
Microsoft Windows Vista Service Pack 2 or later
Microsoft Windows 7
Supported Computers:
Processor: Intel Pentium III/1GHz or faster
Memory: 256MB or larger (512 or larger recommended)
Hardware: A USB port that meets the operating requirements of Windows;
A writable CD/DVD drive is required in order to create audio CDs or DSD discs.
Mac OS X
Supported OS:
Mac OS X 10.4 or later
Supported Computers:
Processor:Apple G4/800MHz or faster (Intel-based Mac recommended)
Memory: 256MB or larger (512 or larger recommended)
Hardware: A USB port that meets the operating requirements of Mac OS X;
A writable CD/DVD drive is required in order to create audio CDs or DSD discs. |
- 16 Recording Tracks to Hard Drive: 16-bit resolution at 44.1 kHz - no compression
- Extended Recording Time: More than 7.5 hours of 16-track recording at CD quality
- FAT32 Disc Format and WAV Recording: Plus USB port for easy transfer of recordings to PC
- Input EQ Library: 33 sound shaping presets available for all inputs
- Direct CD-RW Connection via USB: Master direct to USB CD-RW (no PC required)
|
The new Fostex FR-2 has been designed specifically for location sound recording; high quality sound effects acquisition; TV & radio documentary; in fact any application where quality audio recording is required.
With excellent quality (up to 24-bit / 192KHz recording - a first for a CF recorder), huge feature list and a cost-effective price point, the FR-2 offers users of portable DAT and other formats the opportunity to make the switch to a more flexible, higher quality audio acquisition machine without sacrificing features.
- Recording industry standard, PC-compatible BWF files (stereo/mono) on a FAT32 media format
- Up to 24-bit/192kHz uncompressed recording
- Includes a unique 22.05kHz sampling frequency setting for extended recording
- Records to both Type I & II CompactFlash cards and PCMCIA 1.8” hard disk drives*1
- Fostexʼs "File per Take” system with auto scene & take naming/increment
- Two balanced XLR microphone inputs with switchable phantom power and top quality, high headroom mic pre-amps
- 132 x 64 dot matrix LCD screen for ease of use & high visibility in the field
- Uses AA-sized rechargeable NiMH batteries which are widely available due to the popularity of digital cameras. 8 AA cells will provide approximately 2.5 hours operation when recording to a CF card
- Easy file transfer to PC/Mac via PCMCIA, CF adaptor or standard on-board USB connection for data editing and/or backup*2
- Quick and easy on-board file naming or via external keyboard through standard USB keyboard port
- “Pre-record” loop buffer of approximately 10 seconds*3
- Easy software update via CF or PCMCIA card with downloads from the internet
- Optional timecode generator / reader card
Notes
*1 May require software update for PCMCIA HD operation
*2 Complies with Windows ME/2000/XP, Mac OS 10.2 or higher
*3 Varies depending on sampling frequency“
- GENERAL
Recording Media CompactFlash card, PCMCIA HD
Recording Format BWF
Number of Channels Stereo / Mono
Sampling Frequency 22.05 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz
Quantization 16 bit (22.05 - 48kHz), 24 bit (44.1 - 192kHz)
- PHYSICAL
Power Requirement 8 x AA type dry cell (NiMH recommended)
AC adaptor (optional)
DC 12V
Power Consumption approx. 5W
Dimension 250(W) x 77(H) x 220(D) mm
Weight 1.5kg (w/out battery)
- PERFORMANCE
R/P Frequency Response 20Hz to 10kHz +/-1dB (fs: 22.05kHz)
20Hz to 20kHz +/-1dB (fs: 44.1 / 48kHz)
20Hz to 40kHz +/-2dB (fs: 88.2 / 96kHz)
20Hz to 80kHz +/-3dB (fs: 176.4 / 192kHz)
S/N (ADC-DAC, 24-bit, ref: -20dB, fs:48kHz)
Line (input gain: +4dBu): 100dB (typical)
Mic: (input gain: -60dBu): 87dB (typical)
Dynamic Range 100dB (ADC-DAC, 24bit, ref:-20dB, fs:48kHz) typical
T.H.D. (ADC-DAC, 24-bit, ref:-20dB, fs:48kHz)
Line (input gain: +4dBu): Less than 0.005% (at 1kHz, -1dB typical)
Mic (input gain: -60dBu): Less than 0.008% (at 1kHz, -1dB typical)
Power Life approx. 2 hours 30 min. (8 x AA NiMH type/2300mAH)
- INPUT / OUTPUT CONNECTORS
ANALOG AUDIO INPUT L/R
Connector XLR-3-31 type (Pin2: Hot)
Line Input Impedance : More than 6k ohm
Reference Input Level +4dBu
Maximum Input Level +24dBu (Trim: +4dBu, at the prefader stage)
MIC
Input Impedance More than 6k ohm
Input Level -60dBu
Maximum Input Level -40dBu (Trim: +4dBu, at the prefader stage)
Phantom Power P48
ANALOG AUDIO OUTPUT L(Mono)/R
Connector RCA pin type
Output Load Impedance more than 10k ohm
Nominal Output Level +4dBu
HEADPHONE OUTPUT 50 + 50mW (32 ohm)
Max Speaker Output Level 1W
DIGITAL INPUT/OUTPUT (except for 176.4, 192kHz)
Connector XLR
Input Format S/P DIF / AES/EBU automatic
Output Format S/P DIF / AES/EBU switchable
USB x 2 (keyboard / PC only)
TIMECODE CARD (OPTIONAL, T.B.A.)
LTC Input/Output LEMO
Frame Rate 23.976/24/25/29.97DF/29.97ND/30DF/30ND
Gen Mode 24H RUN / REC RUN / FREE RUN / EXT RUN
| DP-008EX
- Eight mono tracks
- CD-quality recording (16bit/44.1kHz)
- Two tracks simultaneous recording/ eight tracks simultaneous playback
- Dedicated stereo master track available
- Record to SD/SDHC card (Up to 32GB)
- 2 Built-in omni-directional condenser microphones
- Microphone sensitivity can be selected from 2-positions (Low/High)
- Two TS 1/4" or XLR mic/line inputs
- INPUT A can connect high-impedance instrument directly (Like an electric-guitar)
- Phantom power supply
- Independent LEVEL/PAN/Reverb SEND knobs for each track
- Two RCA unbalanced line inputs
- 20mW/ch headphone output
- Footswitch ready with polarity switching (Notice: can't use RC-3F)
- 128x64 dot-matrix LCD with backlight
- Four AA batteries operation up to 6.5 hours (When recording, using the eneloop battery)
- Insert effects for input channels (2-band shelving EQ, compressor, exciter, de-esser)
- Mastering effects (2-band shelving EQ, multi-band compressor, normalize)
- Auto analysis mastering function
- 2-band shelving EQ for each track
- Reverb effects (Hall1/2,Room,Studio,Plate1/2)
- Optional AC adapter ready (TASCAM PS-P520)
- Can connect an external battery pack (TASCAM BP-6AA)
- Direct locate function by jog-wheel
- Repeat playback between IN/OUT point
- Track edit functions(COPY PASTE, COPY INSERT, MOVE PASTE, MOVE INSERT, OPEN, CUT, SILENCE, CLONE TRACK, CLEAN OUT)
- Bounce function allows recording of more six tracks
- UNDO/REDO(UNDO HISTORY) function
- Chromatic tuner and metronome included
- High-speed data transfer by USB2.0 connection
- Backup and restore songs
- File import/export by Wav format (mono/stereo)
- Export stereo master file as stereo wav format
- 2GB SD card included
|
Reviews
There are no reviews yet.