TASCAM TM-10LB Condenser lavalier microphone

73.00 incl. GR VAT

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available Available SKU: TA/EM/000462 Category:
The ideal accessory for the industry leading DR-10L Bodypack Digital Recorder, the TM-10LB is a replacement lavalier microphone that not only privides a backup for critical recoding jobs but also allows the recordist to select between a white and black microphone element. The TM-10LB and TM-10LW also feature a Sennheiser style screw lock connector maing […]

 

Read more

The ideal accessory for the industry leading DR-10L Bodypack Digital Recorder, the TM-10LB is a replacement lavalier microphone that not only privides a backup for critical recoding jobs but also allows the recordist to select between a white and black microphone element.

The TM-10LB and TM-10LW also feature a Sennheiser style screw lock connector maing them an attractive acccessory to many Sennheiser based audio rigs

Matching Lapel Clip and Windscreen Included

Ensuring a clean, crisp look as well as excellent audio performance in a variety of locations, both the TM-10LB and the TM-10LW come complete with a color matched lapel clip and windscreen.

Features at-a-glance

  • Secure connection with screw-down connector
  • Sennheiser style connector features 1/8” (3.5mm) male jack with screw-down plug for firm connection with wireless transmitters or TASCAM DR-10 series. (Connection with normal 3.5mm jack is also available)
  • Windscreen and clip included
  • Color variation – black (TM-10LB) or white (TM-10LW)
  • Microphone sensitivity: -42dBV/PA, maximum SPL: 115dB SPL
  • Omnidirectional lavalier microphone
  • Cable length: 160cm
Model Back-electret condenser microphone
Directivity Omnidirectional
Frequency response 50Hz – 18,000Hz
Output impedance 1.8k ohm (at 1kHz)
Load impedance 100Ω
Sensitivity -42dB (0dB=1V/Pa at 1kHz)
Max. SPL 115dB SPL (at 1kHz)
Connector 3.5mm (1/8“) stereo mini plug (with screw lock)
Power Plug-in power
Drive voltage 1.5 – 10v
Dimensions 132.5 × 457.5 × 140 mm / 5.2 x 18 x 5.5 inch
Weight 24g (0.053 lb)
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “TASCAM TM-10LB Condenser lavalier microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

TASCAM TM-10LB Condenser lavalier microphone removeAUDIX ADX10-p Condenser lapel microphone removeAUDIX LP5 Micro-sized lavalier condenser microphone removeAUDIO TECHNICA PRO70 CONDENSER LAVALIER MICROPHONE removeRODE Smart Lav+ Lavalier microphone for smartphones removeRODE Lavalier Microphone remove
NameTASCAM TM-10LB Condenser lavalier microphone removeAUDIX ADX10-p Condenser lapel microphone removeAUDIX LP5 Micro-sized lavalier condenser microphone removeAUDIO TECHNICA PRO70 CONDENSER LAVALIER MICROPHONE removeRODE Smart Lav+ Lavalier microphone for smartphones removeRODE Lavalier Microphone remove
Image
SKUTA/EM/000462ADX10-pL5PPRO70H11RD00044H11RD00028
Rating
Price 73.00 incl. GR VAT 213.34 incl. GR VAT 213.34 incl. GR VAT 145.00 incl. GR VAT 65.00 incl. GR VAT 204.00 incl. GR VAT
Stock

Only 1 left in stock

In stock

In stock

Available on backorder

In stock

In stock

AvailabilityOnly 1 left in stockIn stockIn stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe ideal accessory for the industry leading DR-10L Bodypack Digital Recorder, the TM-10LB is a replacement lavalier microphone that not only privides a backup for critical recoding jobs but also allows the recordist to select between a white and black microphone element. The TM-10LB and TM-10LW also feature a Sennheiser style screw lock connector maing them an attractive acccessory to many Sennheiser based audio rigs Matching Lapel Clip and Windscreen Included Ensuring a clean, crisp look as well as excellent audio performance in a variety of locations, both the TM-10LB and the TM-10LW come complete with a color matched lapel clip and windscreen. Features at-a-glance
  • Secure connection with screw-down connector
  • Sennheiser style connector features 1/8” (3.5mm) male jack with screw-down plug for firm connection with wireless transmitters or TASCAM DR-10 series. (Connection with normal 3.5mm jack is also available)
  • Windscreen and clip included
  • Color variation - black (TM-10LB) or white (TM-10LW)
  • Microphone sensitivity: -42dBV/PA, maximum SPL: 115dB SPL
  • Omnidirectional lavalier microphone
  • Cable length: 160cm
Model Back-electret condenser microphone
Directivity Omnidirectional
Frequency response 50Hz - 18,000Hz
Output impedance 1.8k ohm (at 1kHz)
Load impedance 100Ω
Sensitivity -42dB (0dB=1V/Pa at 1kHz)
Max. SPL 115dB SPL (at 1kHz)
Connector 3.5mm (1/8“) stereo mini plug (with screw lock)
Power Plug-in power
Drive voltage 1.5 - 10v
Dimensions 132.5 × 457.5 × 140 mm / 5.2 x 18 x 5.5 inch
Weight 24g (0.053 lb)

Miniaturized lavalier condenser microphone for wireless or wired applications.

The ADX10 is a miniaturized condenser microphone designed for lavaliere applications such as speech, presentation and theatrical production. The ADX10 has the ability to accurately capture and reproduce vocals from a comfortable distance of 4“- 8“. This mic is clear, resistant to feedback and easy to use.

Designed with a uniformly controlled cardioid polar pattern, the ADX10 helps to isolate the area or section being miked from other vocals or instruments on stage. The ADX10 has a smooth, accurate frequency range of 50 Hz - 18 kHz. This mic is lightweight, low profile and has a natural sound with exceptional sound response.

Primarily for use with the Audix RAD360 Wireless System, the ADX10 includes a tie-clip and a 3' attached cable  terminating to a mini-XLRf connector.

MODEL VARIATIONS:

ADX10P - For hard wired application. Includes an 8' cable terminating to a mini-XLRf connector tie clip, external windscreen and a phantom power adapter module. 9 - 48 V phantom power required.

Type Pre-polarized Condenser
Polar Pattern Cardioid
Frequency Response 50Hz - 18kHz
Impedance 250 Ohms
Sensitivity 5 mV/Pa @1k


Micro-sized lavalier condenser microphone for wireless and wired applications.

Cardioid microphone with 8ʼ cable terminating to a mini-XLRf connector with phantom power adapter for hard wired applications.

Includes APS910
phantom power adapter. 9-52 V phantom power. Black.

This miniature condenser microphone achieves full-sounding pickup and is known for outstanding consistency and dependable performance. Supplied with both a clothing clip and guitar mount, it provides natural and articulate vocal reproduction when used as a clip-on lavalier and excels in pickup of acoustic guitar. The PRO70 is designed to make music and speech clearly and comfortably audible, yet never draw attention to itself or its operation. The microphone is equipped with a low-frequency roll-off switch that allows for reduced pickup of room noise. The versatile PRO70 may be powered by either battery or phantom power. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Miniature condenser microphone is ideal for both vocal and acoustic guitar applications
Natural and articulate vocal reproduction when used as a clip-on lavalier - clothing clip included
Excels in pickup of acoustic guitar with included instrument adapter
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Switchable low-frequency roll-off
Corrosion-resistant contacts from gold-plated XLRM-type connector
Operates on battery or phantom power
6\' (1.8 m) cable permanently attached between microphone and power module

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 100-14,000 Hz
Low Frequency Roll Off: 80 Hz, 8 dB/octave
Open Circuit Sensitivity: Phantom: -45 dB (5.6 mV) re 1V at 1 Pa Battery: -45 dB (5.6 mV) re 1V at 1 Pa
Impedance: Phantom: 200 ohms Battery: 200 ohms
Maximum Input Sound Level: Phantom: 123 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 96 dB, 1 kHz at Max SPL Battery: 96 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 67 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Off, on-flat, on-roll-off
Output Connector: Integral 3-pin XLRM-type
Cable: Integral 6\' (1.8 m), permanently attached between microphone and power module
Accessories: AT8411 clothing clip; AT8444 instrument adapter; power module; windscreen; battery; soft protective pouch

The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.

With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RØDE Rec app for iOS, or any other audio app of their choice.

By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ʽbʼ, ʽtʼ and ʽpʼ sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar® reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.

The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RØDEʼs RØDE Rec app for Apple iOS devices. RØDE Rec turns the userʼs iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.

 

Acoustic Principle    Pressure Gradient
Active Electronics    JFET
Capsule    0.10“
Polar Pattern     [Omnidirectional - picks up all sides equally]
Address Type    End
Frequency Range    20Hz - 20kHz (selected HPF @ 0)
Output Impedance    0Ω
Maximum SPL    110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level    189.0dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity    -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)    27dB-A
Weight     6.00gm
Dimensions    1180.00mmH x 4.50mmW x 4.50mmD
Dimensions    1180.00mmH x 4.50mmW x 4.50mmD
Output     TRRS Output
Warranty     1 year

 


 

Type  Condenser - Omni
Frequency Ressponse    60Hz - 18kHz
Sensitivity    -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
 Resistance   3000Ω
Dimensions   4.50mmW x 12.00mmH x 4.50mmD
Weight   1.00gm
Accessories    Αntitrauma case,WS-LAV, Minifur LAV, Micon cable, Spanner

Weight0.10 kg0.50 kg0.50 kg0.30 kg0.50 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.50 kg
Weight 0.50 kg
Weight 0.30 kg
Weight 0.50 kg
Weight 0.20 kg