TASCAM TM-10LW Condenser lavalier microphone

The ideal accessory for the industry leading DR-10L Bodypack Digital Recorder, the TM-10LB is a replacement lavalier microphone that not only privides a backup for critical recoding jobs but also allows the recordist to select between a white and black microphone element.

The TM-10LB and TM-10LW also feature a Sennheiser style screw lock connector maing them an attractive acccessory to many Sennheiser based audio rigs

• Secure connection with screw-down connector
• Sennheiser style connector features 1/8” (3.5mm) male jack with screw-down plug for firm connection with wireless transmitters or TASCAM DR-10 series. (Connection with normal 3.5mm jack is also available)
• Windscreen and clip included
• Color variation - black (TM-10LB) or white (TM-10LW)
• Microphone sensitivity: -42dBV/PA, maximum SPL: 115dB SPL
• Omnidirectional lavalier microphone
• Cable length: 160cm

Technical Data
 Frequency response  40...20.000 Hz 
 Sensitivity as per 121 TR 9-5  42 mV/Pa +- 3dB 
 Maximum sound pressure level (passiv)  118 dB (k=1%) 
 Pick-up pattern  cardioid 
 Dimensions  d=12mm, l=26mm 

• Extremely light, inconspicuous lavalier microphone
• Excellent audio quality across the full bandwith

Low-profile, cost efficient clip-on microphone for applications including houses of worship, lecturers, etc. Connects to AKG bodypack transmitters.

The CK 99 L provides a natural sound, with a slight rise above 10 kHz for added clarity. Its cardioid polar pattern and bass rolloff combine to suppress unwanted ambient noise.

Cardioid polar pattern
eliminates noise from the rear

125° pickup angle
for inexperienced or very vivacious talkers

Small housing and durable metal clip
for inconspicuous, secure mounting

General	Audio Frequency bandwidth 15 to 18000 Hz Sensitivity 8.8 mV/Pa Equivalent Noise Level 34 dB-A Signal to Noise 60 dB-A Electrical Impedance 200 Ohms Recommended Load Impedance 2000 Ohms
Polar Patterns	Cardioid
Powering Interface	Voltage 1.5 to 10 V Current 2 mA
Audio Output	Type Mini XLR Gender Female Contacts 3-pin
Design	Finish matte black
Dimensions / Weight	Height 23 mm Diameter 8 mm Net Weight 2.5 g

The e 608 is a super-cardioid microphone ideal for almost invisible clip-miking
of woodwind (except certain Flutes), brass and drums. A newly developed clamp
and gooseneck mounting enables the capsule to be positioned close to the signal
source for high realism and high-level output.

Features
Rugged reinforced glass-fibre body
Shock-mounted capsule provides low sensitivity to impact and handling noise
Hum compensating coil
Extremely robust connection cable with XLR connector
Delivery Includes
1 e 608
1 microphone clip
1 pouch

Technical Data
Frequency Response  40.....16000 Hz 
Sensitivity in free field, no load (1kHz)  0,8 mV/Pa 
Min. terminating impedance  1000 Ohm 
Dimensions  d 17 x 185 mm 
Weight w/o cable  20 g 

 Shure SLX14 Instrument Wireless System Features:

    SLX4 Wireless Receiver:
    Automatic Frequency Selection
    Automatic Transmitter Setup
    960 Selectable frequencies across 24MHz bandwidth
    Detachable 1/4 wave antennas
    Microprocessor-controlled diversity
    RF presence LED
    5-segment audio meter
    Multi-function, backlit LCD
    Low battery indicator
    Frequency and power lockout
    Rugged metal chassis
    Volume control on rear of unit
    1/2 rack design
    Furnished rack hardware
    Non-slip bumpers for use out of rack
    XLR and 1/4" outputs

    SLX1 Bodypack Transmitter
    Automatic Transmitter Setup
    Backlit LCD with timeout feature
    Frequency and power lockout
    3-segment battery fuel gauge
    2 AA batteries (included) provide 8 hours of continuous use
    518 - 782 MHz operating range



Shure SLX14 Instrument Wireless System Specifications:

    SLX4 Wireless Receiver:
    Audio Output Level (ref. ± 38kHz deviation with 1kHz tone): XLR connector (into 600 Ohm load): —13dBV; 1/4" connector (into 3000 Ohm load): —2dBV
    Output Impedance: XLR connector: 200 Ohms; 1/4" connector: 1kohms
    XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-)
    Sensitivity: —105 dBm for 12 dB SINAD, typical
    Image Rejection: >70 dB, typical
    Power Requirements: 12—18 Vdc at 150 mA, supplied by external power supply
    Operating Range Under Typical Conditions: 300 ft. (100m)
    Note: Actual range depends on RF signal absorption, reflection, and interference
    Audio Frequency Response (+/— 2 dB): Minimum: 45 Hz: Maximum: 15 kHz
    Note: Overall system frequency depends on microphone element.
    Total Harmonic Distortion (ref. +/— 38 kHz deviation, 1 kHz tone): 0.5%, typical
    Dynamic Range: >100 dB A-weighted
    Operating Temperature Range: —18 degree C (0 degree F) to +50 degree C (+122 degree F)
    Note: battery characteristics may limit this range
    Dimensions (H x W x D): 1.65 x 7.76 x 5.28 in., (42 x 197 x 134 mm)
    Weight: 1 lb. 13 oz. (816 g )
    Housing: Galvanized steel
    Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with
    respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
    Logic Connections: Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC; Pin 2: Logic ground; Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA; Absolute maximum -0.7 to 5.5V DC

    SLX1 Bodypack Transmitter
    Audio Input Level: -10 dBV maximum at mic gain position, +10 dBV maximum at 0 dB gain position, +20 dBV maximum at -10 dB gain position
    Gain Adjustment Range: 30dB
    Input Impedance: 1 Mohms
    RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations
    Dimensions (H x W x D): 4.25 x 2.50 x 0.75 in. (108 x 64 x 19 mmD)
    Weight: 81 grams (3 oz.) without batteries
    Housing: Molded ABS case
    Power Requirements: 2 "AA" size alkaline or rechargeable batteries
    Battery Life: >8 hours (alkaline)