TASCAM TM-10LW Condenser lavalier microphone

73.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The ideal accessory for the industry leading DR-10L Bodypack Digital Recorder, the TM-10LB is a replacement lavalier microphone that not only privides a backup for critical recoding jobs but also allows the recordist to select between a white and black microphone element. The TM-10LB and TM-10LW also feature a Sennheiser style screw lock connector maing […]

 

Read more

The ideal accessory for the industry leading DR-10L Bodypack Digital Recorder, the TM-10LB is a replacement lavalier microphone that not only privides a backup for critical recoding jobs but also allows the recordist to select between a white and black microphone element.

The TM-10LB and TM-10LW also feature a Sennheiser style screw lock connector maing them an attractive acccessory to many Sennheiser based audio rigs

Matching Lapel Clip and Windscreen Included 

Ensuring a clean, crisp look as well as excellent audio performance in a variety of locations, both the TM-10LB and the TM-10LW come complete with a color matched lapel clip and windscreen.

 

Features at-a-glance

  • Secure connection with screw-down connector
  • Sennheiser style connector features 1/8” (3.5mm) male jack with screw-down plug for firm connection with wireless transmitters or TASCAM DR-10 series. (Connection with normal 3.5mm jack is also available)
  • Windscreen and clip included
  • Color variation – black (TM-10LB) or white (TM-10LW)
  • Microphone sensitivity: -42dBV/PA, maximum SPL: 115dB SPL
  • Omnidirectional lavalier microphone
  • Cable length: 160cm
Model Back-electret condenser microphone
Directivity Omnidirectional
Frequency response 50Hz – 18,000Hz
Output impedance 1.8k ohm (at 1kHz)
Load impedance 100Ω
Sensitivity -42dB (0dB=1V/Pa at 1kHz)
Max. SPL 115dB SPL (at 1kHz)
Connector 3.5mm (1/8“) stereo mini plug (with screw lock)
Power Plug-in power
Drive voltage 1.5 – 10v
Dimensions 132.5 × 457.5 × 140 mm / 5.2 x 18 x 5.5 inch
Weight 24g (0.053 lb)

 

 

 

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “TASCAM TM-10LW Condenser lavalier microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

TASCAM TM-10LW Condenser lavalier microphone removeShure WL93 & WL93T Lavalier Omni Condenser Microphone removeMIPRO MU-55L Omni-Directional Lavalier Microphone removeRODE Smart Lav+ Lavalier microphone for smartphones removeShure MX185 Lavalier Condenser Microphone removeAUDIX LP5 Micro-sized lavalier condenser microphone remove
NameTASCAM TM-10LW Condenser lavalier microphone removeShure WL93 & WL93T Lavalier Omni Condenser Microphone removeMIPRO MU-55L Omni-Directional Lavalier Microphone removeRODE Smart Lav+ Lavalier microphone for smartphones removeShure MX185 Lavalier Condenser Microphone removeAUDIX LP5 Micro-sized lavalier condenser microphone remove
Image
SKUTM-10LWWL93 & WL93TMIP00245H11RD00044MX185L5P
Rating
Price 73.00 incl. GR VAT 198.00 incl. GR VAT 101.00 incl. GR VAT 65.00 incl. GR VAT 265.00 incl. GR VAT 213.34 incl. GR VAT
Stock

Available on backorder

In stock

In stock

In stock

In stock

In stock

AvailabilityAvailable on backorderIn stockIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The ideal accessory for the industry leading DR-10L Bodypack Digital Recorder, the TM-10LB is a replacement lavalier microphone that not only privides a backup for critical recoding jobs but also allows the recordist to select between a white and black microphone element.

The TM-10LB and TM-10LW also feature a Sennheiser style screw lock connector maing them an attractive acccessory to many Sennheiser based audio rigs

Matching Lapel Clip and Windscreen Included  Ensuring a clean, crisp look as well as excellent audio performance in a variety of locations, both the TM-10LB and the TM-10LW come complete with a color matched lapel clip and windscreen.   Features at-a-glance
  • Secure connection with screw-down connector
  • Sennheiser style connector features 1/8” (3.5mm) male jack with screw-down plug for firm connection with wireless transmitters or TASCAM DR-10 series. (Connection with normal 3.5mm jack is also available)
  • Windscreen and clip included
  • Color variation - black (TM-10LB) or white (TM-10LW)
  • Microphone sensitivity: -42dBV/PA, maximum SPL: 115dB SPL
  • Omnidirectional lavalier microphone
  • Cable length: 160cm
Model Back-electret condenser microphone
Directivity Omnidirectional
Frequency response 50Hz - 18,000Hz
Output impedance 1.8k ohm (at 1kHz)
Load impedance 100Ω
Sensitivity -42dB (0dB=1V/Pa at 1kHz)
Max. SPL 115dB SPL (at 1kHz)
Connector 3.5mm (1/8“) stereo mini plug (with screw lock)
Power Plug-in power
Drive voltage 1.5 - 10v
Dimensions 132.5 × 457.5 × 140 mm / 5.2 x 18 x 5.5 inch
Weight 24g (0.053 lb)

 

 

 

Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement Small, inconspicuous mounting hardware Full, clear sound comparable to larger microphones Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation Controlled low-frequency rolloff reduces low-frequency clothing and room noise Low distortion, wide dynamic range Uniform omnidirectional polar pattern Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband Wide-range phantom powering (SM93) accepts all commonly used voltages Type Condenser (electret bias) Frequency Response 50 to 20,000 Hz Response Curve Image Small SM93 WL93 View Larger Polar Pattern Omnidirectional, uniform with frequency Output Impedance 3000 ohms Output Level (1 Pascal = 94 dB SPL) Open Circuit Voltage: -38 dBV/Pa (13 mV) Output Clipping Level (at 1,000 Hz) 0.25 V at 120 dB Total Harmonic Distortion Less than 1% at 120 dB Maximum SPL 120 dB Dynamic Range (maximum SPL to A-weighted noise level) 102 dB Output Noise (equivalent SPL) 18 dB typical, A-weighted Signal-to-Noise Ratio 76 dB at 94 dB SPL (IEC 651) Polarity Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)* *Produces positive voltage at pin 2 of Shure wireless receiver three-pin connector Recommended Operating Voltage 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4) Current Drain 40 microA typical Environmental Conditions Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F) Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F) Cable Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F (WL93T: Tan 1.27 m [4.17 ft]) Case Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille Net Weight Microphone: 16 g (0.57 oz)
  • Miniature MU-55 is inconspicuous, lightweight and waterproof.
  • Supplied with 4-pin mini XLR and fits all MIPRO bodypack transmitters.
  • Featuring a smooth, warm, natural sound.
  • Available in black or beige colors.
  • Ideal for theater, houses of worship and educational applications.
   
  Capsule Module 4.5 mm Ø omni-directional condenser microphone  
  Frequency Response 40 Hz~20 kHz  
  Sensitivity -49±3 dBV/Pa (0dB=1V/Pa)  
  Max. SPL 135 dB (Typical,1%THD)  
  Plug 4-pin mini XLR or TA4F  
  Color Black or Beige  
  Cable Length 150 cm / 59 "  
  Weight Approx. 14 g / 0.5 oz  
  Note Refer to actual product in the event of product description discrepancy.
 

The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.

With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RØDE Rec app for iOS, or any other audio app of their choice.

By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ʽbʼ, ʽtʼ and ʽpʼ sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar® reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.

The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RØDEʼs RØDE Rec app for Apple iOS devices. RØDE Rec turns the userʼs iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.

 

Acoustic Principle    Pressure Gradient
Active Electronics    JFET
Capsule    0.10“
Polar Pattern     [Omnidirectional - picks up all sides equally]
Address Type    End
Frequency Range    20Hz - 20kHz (selected HPF @ 0)
Output Impedance    0Ω
Maximum SPL    110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level    189.0dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity    -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)    27dB-A
Weight     6.00gm
Dimensions    1180.00mmH x 4.50mmW x 4.50mmD
Dimensions    1180.00mmH x 4.50mmW x 4.50mmD
Output     TRRS Output
Warranty     1 year

 


 


Condenser
    Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

Microflex® Lavalier microphones bring a new level of sophistication to personal voice reproduction. Like all Microflex family microphones, the Lavaliers use Shure's interchangeable condenser cartridges, available in cardioid, supercardioid or omnidirectional polar patterns. That means you can be sure there is a Microflex Lavalier that's right for your application.  Compatible with all Shure wireless bodypack transmitters, their high sensitivity and wide frequency response guarantee great sound.

MX185     Cardioid, Includes Belt-Clip Preamp, Rotatable Tie Clip, Dual Tie Clip, Snap-Fit Windscreen

Micro-sized lavalier condenser microphone for wireless and wired applications.

Cardioid microphone with 8ʼ cable terminating to a mini-XLRf connector with phantom power adapter for hard wired applications.

Includes APS910
phantom power adapter. 9-52 V phantom power. Black.

Weight0.10 kg0.20 kg0.20 kg0.50 kg0.20 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 0.50 kg
Weight 0.20 kg
Weight 0.50 kg