Content |
Features at a glance - Supercardioid shotgun microphone
- Shoe adapter (ISO/JIS standard) attaches to a camera accessory shoe.
- Records to microSD or microSDHC cards.
- Records 44.1/ 48 kHz, 16/24-bit, mono or poly linear PCM (WAV/BWF)files.
- Built-in clock stamps BWF files with time-of-day information for additional convenience when editing or searching for files.
- Equalizer has four presets that can be selected to match the recording conditions.
- Limiter automatically reduces high input levels to suitable levels.
- Low cut filter reduces low-frequency noise (120Hz cutoff frequency).
- Dual recording for two files to be recorded simultaneously with different gain levels.
- Slate tone for conveniently synchronizing with video files.
- Camera out jack (combined with headphone jack)outputs audio to a camera.
- Automatic file closing prevents the loss of data before the battery runs out.
- Included noise isolation arm reduces lens operation noise.
- Included attenuation cable matches output audio signal level when connected to a camera.
- Included cable clip secures attenuation and headphone cables.
- Tripod threads (ISO/JIS standards for mounting directly to a camera tripod or rig.
- Playback to headphones to check recorded file contents immediately.
- Time track increment silently and seamlessly splits a recording by creating a new file at regular intervals (about 15 minutes)for easier editing.
- File naming based on a user-specified word or the current date.
- Operates on 1 AAA battery (alkaline, rechargeable NiMH or disposable lithium)or USB bus power.
- Secondary lithium-ion battery maintains date and time information.
- 3.5mm(1/8“)headphone jack built in.
- Easy to read 96×16 dot OEL display with wide viewing angle.
- Micro-B USB 2.0 port to easily transfer files to a computer.
|
RS-422 PROTOCOL CONVERTER
|
The KORE 64™ ROM option represents a complete expansion and reimagining of the PC3 and PC3K's sonic potential (not for the PC3LE). Pushing the limits of V.A.S.T. synthesis for both realistic and experimental electronic sounds, KORE 64™ adds over 300 new programs, including stunning new Synths, Electric Guitars, Horns, Drums and Percussion. With KORE 64™ installed, the PC3/K built-in program library now totals over 1400 presets!
New Setups:
50 new setups featuring the KORE 64™ sounds.
Over 200 new drum grooves in multiple styles.
New Dance and Hip Hop setups for triggering and controlling beats in real time.
New Synths:
New samples modeled after the Oberheim SEM, ARP Chroma, TX802, CZ1, and dozens of legacy waveforms from the K series.
Over 100 new synth programs.
Sounds for popular electronic music styles like House, Trance, Dubstep, Drum&Bass, Glitch, Electro Hip Hop, and more.
More real time controls, beat-synced modulations and envelope control transform sounds without hitting the edit button.
Atmospheric and cycling pads voiced for performing, producing, and scoring.
New Guitars:
New samples modeled after the Gibson Les Paul and Fender Stratocaster.
Palm muted and sustained articulations playable in a picked or legato style.
Instant-shredder arpeggiator patterns, whammy bar effects, and realistic feedback emulations.
Preset sounds from Rock, Country, Rock-a-Billy, Metal, Funk, and more.
New Brass/Woodwinds:
New alto sax, tenor sax, baritone sax, trumpet, and trombone samples.
New programs include solo instruments and custom sections with many combinations of the different instruments.
Articulate with pressure on several new programs.
Sections cover styles from Big Band, Soul, Funk, Latin, R&B, Hip Hop, Rock and more.
New Drums
Drums from Yamaha, Ludwig, Pearl, DW, Rogers, and Gretsch recorded as full kits.
Full cymbal arrays recorded with Zildjian, Paiste, and Sabian cymbals.
72 new Drum Kits and 62 percussion instruments and templates.
10 times the samples and 30 times the data of the existing PC3/PC3K Drums.
All drum kits have mixer functioning on the sliders to change the level the kick, snare, toms, hats, and percussion independently.
Unsurpassed realism and playability for sampled drums.
Full complement of Electronic and Processed Drum samples.
Scratches, hits and Industrial Sounds.
Wide variety of traditional and processed Percussion sounds.
Download the full preset Objects List under the Downloads section
User Installable.
Requires: PC3K OS v2.20 or better
PC3 OS v2.20 or better
All specifications subject to change without notice.
|
Specifications
General
Recording media CompactFlash card
Tested media SanDisk Extreme IV 4 GB, 8 GB, 16 GB
SanDisk Extreme 4 GB, 8 GB, 16 GB
File system FAT32
File format BWF (single-channel, multi-channel)
Number of audio channels 8 channels at 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
8 channels + stereo mix at 44.1 kHZ, 48 kHz
4 channels at 176.4 kHz, 192 kHz
Quantization bit rates 16 bit/24 bit
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1% pull-up/pull-down)
Reference clock Internal, Word in, Video in,
Digital in (CH 1-2, CH 3-4, CH 5-6, CH 7-8)
Timecode frame rates 23.976, 24, 25, 29.97 DF, 29.97 NDF, 30 DF, 30 NDF
Built-in mic Omni directional, monaural
Low cut filter Cut-off frequency: 40/80/120 Hz
Slope: –12/–18 dB/oct
Analogue audio inputs and outputs
MIC IN/LINE IN connectors (1–8) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance (LINE) 10 kOhm
Nominal input level (LINE) + 6 dBu (Ref. level: –9 dB)
+ 4 dBu (Ref. level: Other than –9 dB)
Maximum input level (LINE) Selectable: +15 dBu, +18 dBu, +20 dBu, + 22 dBu, +24 dBu
Input impedance (MIC –25) 2.4 kOhm
Minimum input level (MIC –25) –45 dBu
Maximum iput level (MIC –25) +11 dBu
Input impedance (MIC 0) 2.4 kOhm
Minimum input level (MIC 0) –70 dBu
Maximum input level (MIC 0) –14 dBu
LINE OUT connectors (L/R) XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance 100 Ohm or less
Nominal output level +6 dBu (Ref. level: –9 dB)
Nominal output level +4 dBu (Ref. level: Other than –9 dB)
Maximum output level Selectable: +15 dBu, +18 dBu, +20 dBu, +22 dBu, +24 dBu
PHONES connector 6.3-mm stereo phone jack
Maximum output power 100 mW + 100 mW or more (THD+N: 1 % or less, at 32 Ohm)
Digital audio inputs and outputs
DIGITAL I/O connector D-Sub, 25-pin connector
Format AES3-2003/IEC60958-4 (AES/EBU)
Minimum input voltage 200 mVpp
Maximum input voltage 7 Vpp
Output voltage 3.5 Vpp
DIGITAL OUT connectors BNC
Format AES3-2003/AES-3id-2001 (AES/EBU)
Output voltage 1 Vpp at 75 Ohm
Control inputs and outputs
EXT DC IN connector XLR-4-32 (1: –, 2: NC, 3: NC, 4: +)
Input voltage 11–16 V (2 A)
CASCADE/WORD/VIDEO IN connector BNC
Input voltage 5 V TTL equivalent
Input impedance 75 Ohm ±10 %
Allowable frequency deviation of external sync ±100 ppm
CASCADE/WORD OUT connector BNC
Output voltage 5 V TTL equivalent
Output impedance 75 Ohm ±10 %
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1 % pull-up/pull-down)
TIME CODE IN connector BNC
Input voltage 0.5–5 Vpp
Input impedance 10 kOhm
TIME CODE OUT connector BNC
Output voltage 2.0 Vpp
Output impedance 600 Ohm
USB port USB B-type, 4-pin
Format USB2.0 HIGH SPEED (480 MBit/s)
KEYBOARD connector Mini-DIN connector (PS/2)
Audio performance
Frequency response (MIC/LINE IN to LINE OUT)
All sample rates 20 Hz – 20 kHz, 0 dB (±0.5 dB)
88.2/96 kHz sample rates at 40 kHz –1 dB (±1.0 dB)
176.4/192 kHz sample rates at 80 kHz –3 dB (+1/–2 dB)
Distortion
LINE IN to LINE OUT 0.003 % or less (–20 dB reference level, +23 dBu input, 1 kHz, AES-17 LPF)
MIC IN (MIC –25) to LINE OUT 0.02 % or less (–20 dB reference level, –10 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
MIC IN (MIC 0) to LINE OUT 0.02 % or less (–20 dB reference level, –35 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
S/N ratio
LINE IN to LINE OUT 110 dB(A) or more (22 kHz LPF)
MIC IN (MIC –25 or MIC 0) to LINE OUT 100 dB(A) or more (22 kHz LPF)
Computer compatibility
Windows Windows XP, Windows Vista, Windows 7
CPU Pentium 300 MHz or faster
Memory 128 MB or more
USB USB 2.0 port
Macintosh Macintosh Mac OS X 10.2 or later
CPU Power PC G3, G4, Intel Mac 266 MHz or faster
Memory 64 MB or more
USB USB 2.0 port
Recommended USB host controller Intel chipset
Power supply and other specifications
Power requirements 100–240 V AC, 50–60 Hz (AC adaptor PS-1225L)
10 AA batteries (Alkaline or NiMH)
External DC battery (DC 11–16 V, 2 A or more)
Battery operation time (continuous operation) Measured according to JEITA standard at 48 kHz, 24-bit, 8 ch playback or recording, phantom power off. Varies with operating conditions.
NP type battery (Li-Ion: 14.8 V/4.6 Ah) About 5 hours
AA type batteries (NiMH) About 2 hours
Power consumption 18 W
Dimensions (W x H x D) 270 mm x 100 mm x 260 mm (excluding protrusions)
Weight 3.65 kg (excluding batteries)
Operating temperature range 0–40 ºC
|
Designed for Windows based Pro Tools systems, the affordable Digidesign Pro Tools Custom Keyboard WIN let users work faster in their Pro Tools environment by providing direct access to primary transport and editing functions.
The Digidesign Pro Tools Custom Keyboard use the same symbols and color coding system built into the keyboards on the ICON D-Control worksurface and the other Digidesign control surfaces while retaining all the conventional alphanumeric labels that appear on standard computer keyboards. The Digidesign Pro Tools Custom Keyboard provides plug-and-play USB connectivity and offers a fresh new look at a lower price than ever before. The keyboard also supports a PS-2 connection for maximum compatibility.
Digidesign Pro Tools Custom Keyboard WIN Features
- Text and icons for main Pro Tools custom key commands, in addition to standard keyboard alphanumeric lettering
- Windows - PS-2 connection cord and USB adapter for easy connection with either method
|
The APH-2n optional accessory pack includes seven tools for use with the H2n. The remote control can be used to start, stop and pause recordings as well as to add marks. The other accessories in the pack are a windscreen that reduces wind and breath noise, a mic clip adapter for use with a mic stand, a tabletop tripod with extendable legs, a padded-shell case, an AC adapter and a USB cable. |
Reviews
There are no reviews yet.