TASCAM RC-30P FOOTWSITCH ΓΙΑ 2488 ΜΚΙΙ , Fireone

Why are 4-channels of audio better than 2-channels?

• Capture more ambient sound at any shoot for an overall more convincing soundscape.
• Place mics on each participant in conferences, panels, reporters, etc.
• Redundancy or backup in case of camera mic noise or drop out.
• Simplify wedding shoots with a mic on the bride, groom, officiator and a mic for ambient sound.
• Video editing environments now support multi-channel audio as standard.

• Main Features

  The R-4 brings you a new generation of portable recording. Enjoy superb sound quality. Use the 40GB hard disk drive for extended recording. Record up to four channels at once. Edit waveforms on the recorder itself. All this plus a compact size and light weight that assure outstanding mobility in the field. The Edirol R-4. Gear up for the new generation of portable recording.

  Extended Recording with 40GB Hard Disk Drive
  Equipped with a 40GB hard disk drive, the R-4 can record up to 17 hours at maximum sound quality or up to 58 hours at CD quality.

  Superior 24-bit/96-kHz Linear Recording
  Totally uncompressed recording assures outstanding sound quality. Choose 16-bit or 24-bit quantization and a sampling rate of 44.1 kHz, 48 kHz, or 96 kHz. Save data as WAV files.

  Simultaneous 4-Channel Recording
  The 4 XLR/Phone combo jacks come with switchable phantom power and give you a choice of MONO, STEREO, STEREO X2, or 4CH recording. Digital input/output is also provided.
  Four-channel recording gives you exceptional flexibility. For example, you can use mics to capture the ambience of a performance hall while using line input to record the performance itself. Or you can record at several different level settings simultaneously.

• Five High-Quality Effects
  The R-4 lets you tailor the sound during both recording and playback.

• L Terminal for Linking a Digital Video Camera
  The R-4's L terminal lets you connect a similarly equipped digital video camera to synchronize the camera start/stop while R-4 is recording. Counting the camera's two channels, this configuration gives you a total of six audio channels — a wealth of audio data to get creative with.

  Waveform Editing Using Only the R-4
  The R-4 is all you need to edit waveforms. Just watch the waveform on the LCD as you edit. Scrubbing playback with the shuttle dial lets you set the edit points precisely by sound.

  Index Any Point Instantly
  Press the mark button anytime during recording or playback to mark that point for easy, instant indexing later. With the A-B repeat function you can set two points and repeatedly play back the material between them.

  Easy Playback with the Jog Dial
  Use the jog dial to fast-forward or rewind at any of seven speed levels.

  Built-In Stereo Speakers
  The R-4's built-in speakers make it easy to monitor recorded sound without headphones.

• L Terminal for Linking a Digital Video Camera
  The R-4's L terminal lets you connect a similarly equipped digital video camera to synchronize the camera start/stop while R-4 is recording. Counting the camera's two channels, this configuration gives you a total of six audio channels — a wealth of audio data to get creative with.

  Waveform Editing Using Only the R-4
  The R-4 is all you need to edit waveforms. Just watch the waveform on the LCD as you edit. Scrubbing playback with the shuttle dial lets you set the edit points precisely by sound.

  Index Any Point Instantly
  Press the mark button anytime during recording or playback to mark that point for easy, instant indexing later. With the A-B repeat function you can set two points and repeatedly play back the material between them.

  Easy Playback with the Jog Dial
  Use the jog dial to fast-forward or rewind at any of seven speed levels.

  Built-In Stereo Speakers
  The R-4's built-in speakers make it easy to monitor recorded sound without headphones.

The Tascam iM2X turns an Apple iPhone 4, iPad or iPod Touch 4G into a powerful PCM audio recorder for CD-quality recordings. It consists of a pair of condenser microphones and a high-quality preamp and plugs into the dock connector of the iOS device. The microphone elements are XY oriented for clear stereo definition and minimal phase differences. Moreover, they are adjustable over 180 degrees for the best sound placement.

Unlike mics that use the iOS deviceʼs built-in preamp, the iM2X with its internal A/D converter ensures low noise and better linearity in frequency response. The microphone elements also used in Tascam DR series recorders can handle sound pressure levels up to 125 dB to capture the loudest concerts and instruments without distortion. Thanks to an input level control and a two-colour level meter, level adjustment is very simple. A switchable limiter also contributes to this by reducing sudden peaks and protecting against unforeseen overload.

The iM2X powered through the dock connector, so no battery is required. A USB input is provided to charge the iOS device for long recordings, either through a computer or a USB charger.

An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from AppStore at no charge.

Main Features

Turns your Apple iPhone 4, iPad or iPod Touch 4G into a high-grade PCM audio recorder
Stereo condenser microphone in XY orientation for clear stereo definition and minimal phase differences
Accepts sound pressure level up to 125 dB SPL
Microphone can be swivelled by 180 degrees to capture sound sources in front or behind the unit
Allows recordings in CD quality (44.1kHz/16-bit)
Input level rotary control
Input level indicator (green/red)
Switchable limiter to avoid distorted recordings
Power supply via dock connector, no battery required
USB connector available for recharging the iOS device
Easy setup (attaches to the deviceʼs dock connector)
Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge
Specifications

General
Microphone type        Cardioid condenser (stereo)
Maximum input level        125 dB SPL
Input level adjustment range        0–40 dB
Frequency range        10 Hz – 20 kHz
Sampling frequency        44.1 kHz
Bit rate        16 bit
iOS device recharging port        USB Mini-B connector
iOS device connector        30-pin dock connector
Device support        iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad or iPod touch (4th generation)
Power supply and other specifications
Power supply        Provided through the iOS device connector
Power consumption        90 mW
Dimensions (W x H x D)        56 mm x 57 mm x 22 mm (including connector)
Weight        30 g
Operating temperature range        5–35 °C
Design and specifications subject to change without notice.

Features at a glance

• Supports Sennheiser wireless system mics and transmitters (DR-10CS)
• Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
• Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
  Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration
• 48kHz/24-bit linear PCM mono recording
• WAV files (compatible with BWF format)
• Media: microSD/SDHC cards (supports 32GB capacities)
• Sliding record switch and hold function to prevent misoperation during recording
• Dual recording function
• automatic file closing function to prevent the loss of already recorded data
• High/Mid/Low recording level settings
• Low-cut filter
• Limiter
• Automatic level function
• With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
• Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
• Playback function allows recorded data to be checked immediately
• Headphone output
• Easy-to-read organic EL display
• micro USB B port enables easy data exchange with computers
• Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
• Unit settings can be created and transferred as a computer text file
• Settings can be transferred between DR-10C units using the infrared transmission function
• Firmware can be updated using a microSD card
• Belt clip included
• Silicon band that can be used to attach the unit to a transmitter included
• Custom case for storing the unit and accessories included
• RoHS-compliant product

• Eight mono tracks
• CD-quality recording (16bit/44.1kHz)
• Two tracks simultaneous recording/ eight tracks simultaneous playback
• Dedicated stereo master track available
• Record to SD/SDHC card (Up to 32GB)
• 2 Built-in omni-directional condenser microphones
• Microphone sensitivity can be selected from 2-positions (Low/High)
• Two TS 1/4" or XLR mic/line inputs
• INPUT A can connect high-impedance instrument directly (Like an electric-guitar)
• Phantom power supply
• Independent LEVEL/PAN/Reverb SEND knobs for each track
• Two RCA unbalanced line inputs
• 20mW/ch headphone output
• Footswitch ready with polarity switching (Notice: can't use RC-3F)
• 128x64 dot-matrix LCD with backlight
• Four AA batteries operation up to 6.5 hours (When recording, using the eneloop battery)
• Insert effects for input channels (2-band shelving EQ, compressor, exciter, de-esser)
• Mastering effects (2-band shelving EQ, multi-band compressor, normalize)
• Auto analysis mastering function
• 2-band shelving EQ for each track
• Reverb effects (Hall1/2,Room,Studio,Plate1/2)
• Optional AC adapter ready (TASCAM PS-P520)
• Can connect an external battery pack (TASCAM BP-6AA)
• Direct locate function by jog-wheel
• Repeat playback between IN/OUT point
• Track edit functions（COPY PASTE, COPY INSERT, MOVE PASTE, MOVE INSERT, OPEN, CUT, SILENCE, CLONE TRACK, CLEAN OUT)
• Bounce function allows recording of more six tracks
• UNDO/REDO(UNDO HISTORY) function
• Chromatic tuner and metronome included
• High-speed data transfer by USB2.0 connection
• Backup and restore songs
• File import/export by Wav format (mono/stereo)
• Export stereo master file as stereo wav format
• 2GB SD card included

Features at a glance

• Supports Sennheiser wireless system mics and transmitters (DR-10CS)
• Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
• Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
  Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration
• 48kHz/24-bit linear PCM mono recording
• WAV files (compatible with BWF format)
• Media: microSD/SDHC cards (supports 32GB capacities)
• Sliding record switch and hold function to prevent misoperation during recording
• Dual recording function
• automatic file closing function to prevent the loss of already recorded data
• High/Mid/Low recording level settings
• Low-cut filter
• Limiter
• Automatic level function
• With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
• Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
• Playback function allows recorded data to be checked immediately
• Headphone output
• Easy-to-read organic EL display
• micro USB B port enables easy data exchange with computers
• Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
• Unit settings can be created and transferred as a computer text file
• Settings can be transferred between DR-10C units using the infrared transmission function
• Firmware can be updated using a microSD card
• Belt clip included
• Silicon band that can be used to attach the unit to a transmitter included
• Custom case for storing the unit and accessories included
• RoHS-compliant product