Content |
Once viewed as a toe-tapping way to kill a few minutes of spare time, music apps for iPhone and iPad have matured into truly powerful outlets for creative expression. And with the TASCAM iXR, you can now seamlessly integrate your iOS device into your audio arsenal with all of the connectivity, quality and reliability your music demands. Uniquely designed to bring mobile devices into the world of professional audio, the iXR is a full featured iPhone/iPad/Mac/PC audio interface featuring direct connection to iPhone and iPad via the Lightning Connector, dual microphone preamps, MIDI in and out and balanced stereo outputs. Thinner than any other XLR-equipped audio interface on the market, this backpack-approved powerhouse unleashes the true potential of your smartphone or tablet.
IXR SPECIFICATIONS Sampling frequency | 44.1k/48k/88.2k/96kHz | Quantization bit rate | 16/24bit | Analog audio inputs | | MIC IN (Balanced, IN 1/ IN 2) | | Connector | XLR-3-31(1:GND, 2:HOT, 3:COLD) | Input impedance | 2.2k ohms | Nominal input level | | GAIN:MAX | -65dBu (0.0004Vrms) | GAIN:MIN | -8dBu (0.3090Vrms) | Maximum input level | +8dBu (1.9467Vrms) | Gain | 57dB | INST IN (Unbalanced, IN 1/ IN 2) (MIC/LINE INST switch set to INST) | | Connector | 6.3mm(1/4“) TS-jack(T:HOT, S:GND) | Input impedance | 1M ohms or more | Nominal input level | | GAIN:MAX | -63dBV (0.0007Vrms) | GAIN:MIN | -6dBV (0.5015Vrms) | Maximum input level | +10dBV (3.162Vrms) | Gain | 57dB | LINE IN (Balanced, IN 1/ IN 2) (MIC LINE INST switch set to MIC/LINE) | | Connector | 6.3mm(1/4“) TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
(When set to "LINE" at LINE/INST switch) | Input impedance | 10k ohms | Nominal input level | | GAIN:MAX | -53dBu (0.0017Vrms) | GAIN:MIN | +4dBu (1.228Vrms) | Maximum input level | +20dBu (7.75Vrms) | Gain | 57dB | Analog audio outputs | | LINE OUT (Balanced, LINE OUT 1/L-2/R) | | Connector | 6.3mm(1/4“) TRS-jack(T:HOT, R:COLD, S:GND), BALANCED | Output impedance | 110ohms | Nominal output level | +4dBu (1.273Vrms) | Maximum output level | +20dBu (7.75Vrms) | PHONES | | Connector | 3.5mm(1/8“) stereo mini jack | Maximum output level | 18mW+18mW or more (THD+N 0.1% or less, 32ohms loaded) | MIDI IN / OUT | | Connector | Din 5-pin | Format | Standard MIDI format | USB | | Connector | USB A type | Format | USB2.0 HIGH SPEED mass storage class (480Mbps) | Power |
- Used with a computer, USB bus power
-Used with an iOS device, USB power adapter that supplies 5V and at least 700mA, mobile battery that supplies 5V and at least 700mA, TASCAM BP-6AA external battery pack
| Power consumption | 2.5W | Dimensions | 8.26" W ×1.38" H ×5.54" D inch
210mm W ×35.3mm H ×140.7mm D
| Weight | 600g / 1.3lb | Operating temperature | 5 to 35˚C | Bundled DAW software (download editions) | Steinberg Cubase LE, Steinberg Cubasis LE (a demo version of Cubasis LE can be downloaded for free from the App Store.) |
Audio performance | Frequency response | | IN1/IN2 jack to LINE OUT(BALANCED) | | 44.1k/48k Hz | 20Hz:+0dB/-0.4dB (JEITA), 20Hz:+0dB/-0.1dB (JEITA), 20Hz:+0dB/-0.5dB (Phones output, JEITA) | 88.2k/96k Hz | 20Hz:+0dB/-0.4dB (JEITA), 40Hz:+0dB/-0.25dB (JEITA), 40Hz:+0dB/-2.0dB (Phones output, JEITA) | THD | 0.0025% or less
| S/N ratio | 101dB or more
| Crosstalk | 95dB or more
| EIN | -125dBu or less
|
Computer system requirements | Windows | OS | Windows 7(32-bit SP1, 64-bit SP1), Windows 8.1(32-bit, 64-bit), Windows 10 (32-bit, 64-bit)
* For further information of the latest OS version, please click here. | Compatible computers | Windows-compatible computer with a USB 2.0 port | CPU type/speed | Dual core/2 GHz or faster | Memory | 2GB or more | DRIVER | ASIO2.0, WDM(MME), MIDI | Macintosh | OS | OS X Mountain Lion(10.8.4), OS X Mavericks(10.9.1), OS X Yosemite(10.10), OS X El Capitan (10.11)
* For further information of the latest OS version, please click here. | Compatible computers | Apple Macintosh computer with a USB 2.0 port | CPU type/speed | Dual core/2 GHz or faster | Memory | 2GB or more | DRIVER | Core Audio, Core MIDI | iOS | OS | iOS 8, 9 or later
* For more information about the OS compatibility on each models, please click here. |
|
The all new 896mk3 FireWire audio interface delivers high-end performance, superb sound, innovative new features and enhanced standard features that remain unique.
The 896mk3 provides eight channels of pristine 24-bit 192 kHz analog recording and playback, combined with sixteen channels of optical digital I/O, stereo AES/EBU, S/PDIF and separate analog main outs. Expand your system by connecting the 8pre mic input expander or other MOTU audio interfaces.
The 896mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 896mk3 provides 28 separate inputs and 32 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.
Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer. Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
When recording from the mic/guitar inputs, the 896mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.
After programming the on-board mixing in the studio, unplug the 896mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.
The 896mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
|
The 828mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.
The 828mk3 provides ten channels of pristine 192 kHz analog recording and playback, combined with sixteen channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.
The 828mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 828mk3 provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.
Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven compression, EQ and reverb to every input and output, independent of your host computer. When recording from the mic/guitar inputs, the 828mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no digital clipping or harsh artifacts.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
After programming the on-board mixing in the studio, unplug the 828mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.
The 828mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
| GUITAR LINK UCG102 The Ultimate Guitar-to-USB Interface to Jam and Record with Killer Modeling Amps and Effects
- Plug in your favorite guitar and turn your PC or Mac computer into a guitar amp and recording system without the need for any other hardware
- Enjoy immediate access to Guitar Combos from Native Instruments—the leading authentic guitar amp and stomp box modeling software—now including VST, AU and RTAS plugin versions
- Create Music Now! Incredibly powerful energyXT2 Compact music production software and Audacity editing software—both with full portability on all PC, Mac or Linux computers
- Directly works with your PC or Mac computer—ultra-low latency ASIO driver for PC audio optimization included
- Stereo Headphone output lets you jam with your computer and can also be used for monitoring with active monitor speakers
- Guitar Combos with variable-speed file playback function for MP3, WAV, AIFF audio files—perfect for easy learning and practicing—tuner and metronome function
- Powered via USB—no additional power supply required
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The UCG102 is a USB interface that, like a guitar amp, receives signal from your guitar via a 1/4" input jack. A built-in USB cable then sends signal directly to your computer, where the amazing included software package simulates guitar amps and stomp boxes, in addition to tracking your latest masterpiece. It has a 1/4" headphone jack and PHONES volume dial so you can monitor your performance as you record, a CLIP LED to tell you when your signal is too hot, and a HI/LO level selector.
Super Software
The UCG102 comes packaged with Native Instruments' "Guitar Combos" software that models guitar amps and stomp boxes. Take your pick of the "PLEXI COMBO“, "TWANG COMBO” or "AC BOX COMBO” for stunningly real amplifier tones. Sample them all, then activate the full version of the classic rockin' "AC BOX COMBO" rig. Native Instruments extends special offers to all registered Guitar Combos users, making it more affordable than ever to take advantage of their award-winning GUITAR RIG software packages. Visit http://co.native-instruments.com/index.php?id=4101&prid=247&redirected=1 for the latest special pricing on this incredible software.
You also get energyXT2.5 BEHRINGER Edition, a multi-track recording program.
This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode. To learn more about energyXT Compact BEHRINGER Edition, visit http://www.behringer.com/EN/Support/energyXT.aspx. |
Computer Based Recording Packages
Computer-Based Recording Packages For All Players Of Musical Instruments
The AUDIOGRAM Series has been carefully designed to make setting up your computer-based recording environment an absolute breeze. Coming as a complete kit, the AUDIOGRAM6 and AUDIOGRAM3 each bundle together a hardware interface that adds audio inputs and outputs to your computer, software for recording and producing music, and a USB cable for connecting the audio interface. As such, either package will instantly turn your computer into a powerful yet intuitive tool for recording and editing audio from virtually any microphone or audio input device. What's more, setup is as easy as installing the bundled music-production application, CUBASE AI, on your computer and connecting the audio interface using the USB cable provided! You're then ready to connect instruments, microphones, CD players, MP3 players, and even old record or tape players for recording straight into CUBASE AI.
Size/Weight
Dimensions | Width | 170mm (6-3/4“) | Height | 59mm (2-3/8“) | Depth | 192mm (7-5/8“) | Weight | Weight | 770g (1.7 lbs.) |
General Specifications
Sampling Frequency Rate | USB AUDIO 1.1, 16bit/44.1kHz |
Effects
Types | Dynamic | 1-knob Compressor (COMP) x 2 |
Storage and Connectivity
Connectivity | Headphones | Stereo Phone connector x 1 | Microphone | Mic/Hi-Z input x 2 | LINE IN | Phone connector x 4 (L/MONO x 2, R x 2) | LINE OUT | Phone connector x 2 (L, R) | USB TO HOST | USB (TO HOST) |
Power Supply
System Requirements
Windows | PC | Windows-based computer with built-in USB interface Windows-based computer with built-in USB interface | CPU | 1 GHz or better Intel Core / Pentium / Celeron processor 750 MHz or better Intel Core / Pentium / Celeron processor | Support OS | Windows Vista / Windows XP Professional / XP Home Edition | Memory | More than 1 GB More than 128 MB | Macintosh | PC | Macintosh computer with built-in USB interface | CPU | Intel CPU / Macintosh G3 processor 300 MHz or better | Support OS | Mac OS X 10.3.3 or higher | Memory | More than 128 MB |
Accessories Included Accessories | Cable | USB Cable | Others | CUBASE AI DVD, Owners Manual |
|
| | | 8 channels of premium 24-bit 192K AD/DA conversion | | | | 4 digitally controlled 75db microphone preamps | | | | 2 fully balanced inserts on mic pre channels | | | | 4 Hi-Z instrument inputs capable of handling high level instruments | | | | 2 individual, controllable and assignable high level headphone outputs | | | | 2, 6 or 8 channel monitor outputs | | | | 8 channels of ADAT I/O | | | | FireWire 400 I/O, compatible with OS X Core Audio (no driver required) | | | | 2 channels of SPDIF I/O | | | | “Soft Limit” for maximum digital input level without overs | | | | “UV22HR” for superior dither of 24 bit resolution down to 16-bit | | | | Advanced, dual-stage "Intelliclock” | | | | Complete integration and control with Appleʼs Logic Pro Software | | | | Compatibility with any CoreAudio software applications | | | | Apogeeʼs Maestro Software for advanced control and routing outside of Logic Pro |
|
Reviews
There are no reviews yet.