Features at a glance Network functions / control functions FTP Client function enables automatic uploading of recorded files or downloading audio files from the server Event List for recording, playback, download and other functions can be operated automatically based on the time set Time setting via SNTP Client function enables event management with more accuracy […]
FTP Client function enables automatic uploading of recorded files or downloading audio files from the server
Event List for recording, playback, download and other functions can be operated automatically based on the time set
Time setting via SNTP Client function enables event management with more accuracy
Automatic Upload function enables recorded files to be uploaded automatically
iOS / Android control apps available: allowing transport operations and remote control of various settings
The IF-DA2 interface card supporting Dante 2ch input and output can be installed (sold separately)
Serial and parallel port connections
RC-SS150 Flash Start control unit with the a color LCD screen (sold separately)
Optional RC-3F footswitch can be connected to the RC-20 remote control
Recording capabilities
Supports recording and playback of high-resolution files up to 96kHz / 24bit
Dual SD memory card slot permits mirror and relay recording
Auto mark function: When an error occurs or input level overloads, the time point will be marked automatically
PRE REC function to prevent any missing part in your recording
Auto track function automatically trims the tracks
Compressor and limiter included
Auto level control function automatically adjusts the input level for recording
Starts recording as soon as the unit is turned on with Power-on-record function
Microphone input connector with phantom power supply
Direct recording function enables the recording starts right away without any standby
Playback functions
Call function that saves the position where your last playback starts
Playback modes such as Program, Random, and Single
Ducking function automatically adjusts the playback volume while the input level increases or decreases
All repeat / A-B repeat function
Incremental play function to transport to the beginning of the next track
Monaural mix playback function
Auto Cue function tracks the first sound in the playback for standby
Auto ready function allows a standby before the next track begins
Pitch control and key control function for speed and key adjustments
Can set the mark at any position
EOM (End of message) notification available before the track ends
Other features
Sampling rate converter for inputs and outputs are available
Link playback function allows two units to be operated at the same time
Automatic file closing process to avoid data loss if there is a sudden power loss during recording
User presets: Up to three sets of optional settings can be stored for such things as switching input and output, sampling rate selection and other functions
1U rack-mount size
SS-CDR250N SPECIFICATIONS
SS-CDR250N
SS-R250N
Recording/Playback media
SD
SDHC card (4GB to 32GB), SDXC card (64GB to 128GB)
USB
USB Flash memory (2GB to 64GB)
CD
CD-R, CD-RW
–
File format
CD-DA
44.1kHz, 16bit
–
MP3
44.1k/48k Hz, 64k/128k/192k/256k/320k bps
WAV
44.1k/48k/96k Hz, 16/24 bit
Number of channels
2(stereo), 1(mono)
Analog Audio inputs
UNBALANCED
Connector
RCA jacks
Nominal input level
-10dBV (0.316Vrms)
Maximum input level
+6dBV (2.0Vrms)
Input impedance
10kΩ
BALANCED
Connector
XLR-3-31, (1:GND, 2:HOT, 3:COLD), 6.3mm(1/4“) standard TRS stereo jack
Line input
Nominal input level
+4dBu(1.23Vrms, Ref.Level other than -9dBFS) +6dBu(1.55Vrms, Ref.Level -9dBFS)
FTP Client function enables automatic uploading of recorded files or downloading audio files from the server
Event List for recording, playback, download and other functions can be operated automatically based on the time set
Time setting via SNTP Client function enables event management with more accuracy
Automatic Upload function enables recorded files to be uploaded automatically
iOS / Android control apps available: allowing transport operations and remote control of various settings
The IF-DA2 interface card supporting Dante 2ch input and output can be installed (sold separately)
Serial and parallel port connections
RC-SS150 Flash Start control unit with the a color LCD screen (sold separately)
Optional RC-3F footswitch can be connected to the RC-20 remote control
Recording capabilities
Supports recording and playback of high-resolution files up to 96kHz / 24bit
Dual SD memory card slot permits mirror and relay recording
Auto mark function: When an error occurs or input level overloads, the time point will be marked automatically
PRE REC function to prevent any missing part in your recording
Auto track function automatically trims the tracks
Compressor and limiter included
Auto level control function automatically adjusts the input level for recording
Starts recording as soon as the unit is turned on with Power-on-record function
Microphone input connector with phantom power supply
Direct recording function enables the recording starts right away without any standby
Playback functions
Call function that saves the position where your last playback starts
Playback modes such as Program, Random, and Single
Ducking function automatically adjusts the playback volume while the input level increases or decreases
All repeat / A-B repeat function
Incremental play function to transport to the beginning of the next track
Monaural mix playback function
Auto Cue function tracks the first sound in the playback for standby
Auto ready function allows a standby before the next track begins
Pitch control and key control function for speed and key adjustments
Can set the mark at any position
EOM (End of message) notification available before the track ends
Other features
Sampling rate converter for inputs and outputs are available
Link playback function allows two units to be operated at the same time
Automatic file closing process to avoid data loss if there is a sudden power loss during recording
User presets: Up to three sets of optional settings can be stored for such things as switching input and output, sampling rate selection and other functions
1U rack-mount size
SS-CDR250N SPECIFICATIONS
SS-CDR250N
SS-R250N
Recording/Playback media
SD
SDHC card (4GB to 32GB), SDXC card (64GB to 128GB)
USB
USB Flash memory (2GB to 64GB)
CD
CD-R, CD-RW
-
File format
CD-DA
44.1kHz, 16bit
-
MP3
44.1k/48k Hz, 64k/128k/192k/256k/320k bps
WAV
44.1k/48k/96k Hz, 16/24 bit
Number of channels
2(stereo), 1(mono)
Analog Audio inputs
UNBALANCED
Connector
RCA jacks
Nominal input level
-10dBV (0.316Vrms)
Maximum input level
+6dBV (2.0Vrms)
Input impedance
10kΩ
BALANCED
Connector
XLR-3-31, (1:GND, 2:HOT, 3:COLD), 6.3mm(1/4“) standard TRS stereo jack
Line input
Nominal input level
+4dBu(1.23Vrms, Ref.Level other than -9dBFS) +6dBu(1.55Vrms, Ref.Level -9dBFS)
2.5mmTRS jack (TASCAM RC-3F, RC-20 sold separately)
RS-232C
Connector
D-sub 9 pin
PARALLEL
Connector
D-sub 25 pin
PHONES
Connector
Standard 6.3mm (1/4“) stereo jack
Maximum output
45mW+45mW(THD+N 0.1% or less, into 32Ω load)
Power
AC 100V to 240V, 50/60Hz
Power consumption
22W
20W
Dimensions
482.6(W)×45(H)×300.5(D)mm
Weight
3.2kg
2.9kg
Operating temperature range
5 to 35˚C
Included items
AC power code, RC-10 remote control unit, rack-mounting screw kit, security screw kit, Owner\'s manual (with warranty)
Audio performance
Frequency response
20Hz to 20kHz, +0.5/-0.5dB(JEITA) 20Hz to 40kHz, +0.5/-3dB (JEITA)
Distortion
0.002% or less(Ref:-16dB/BALANCED,JEITA)
S/N ratio
106dB or more (JEITA)
Dynamic range
106dB or more (JEITA)
Crosstalk
100dB or more (JEITA)
EIN(equivalent input noise)
-125dBu or less (40Ω 20kHzLPF)
Tuner + Metronome + Recorder - All in One Unit!
The TMR-50 - Your Ideal Practice Partner
Highlights:
Tuner, metronome, and recorder can be used simultaneously or independently.
Internal mic and speaker make it easy to record and play back your performance
Loop Play function lets you repeat a desired region of a recorded track
High-quality linear PCM recording/playback
Record up to 100 tracks (approximately total 20 minutes)
USB port lets you transfer recorded data and song files between the TMR-50 and your computer
Newly designed highly responsive LCD needle-type meter
Wide detection range from C1 to C8
The Sound Out function produces a reference tone in a three-octave range from the built-in speaker
The Sound Back function generates the reference tone that's closest to the input sound, while the meter indicates the pitch discrepancy between the reference and the input sound - a great function for ear training!
Calibration supports a range of concert pitches
Marks indicate pure major and minor third intervals
Wide tempo range of 30--252 beats per minute
15 rhythm variations let you practice with a broad range of musical styles
Easy tempo settings with two types of tempo step patterns plus a tap tempo function
Large LCD with backlight brightness that's adjustable over two levels for enhanced visibility
Your choice of body color: black or pearl white
Convenient key layout, and newly designed stand and battery cover
Memory Backup and Auto Power Off
Korg's popular TM series of tuner/metronome units is loved by players who practice to perfect their musical skills. Now joining the lineup is the TMR-50, which adds recorder functionality to the already impressive list of features. An extremely valuable way to improve your playing ability is to identify the problem areas that need work, and then practice to improve those areas. With its built-in mic and speaker, the TMR-50 makes it easy to practice this way. It provides high-quality linear PCM recording and a USB port for convenient usage with your computer. The TMR-50 features equally robust capabilities for its tuner and metronome functionality that will help you improve your sense of pitch and rhythm. Two choices of color are available: black and pearl white. Whether you're in a brass band or an orchestra, the TMR-50 is the ideal partner for anyone who wants to improve their playing.
Specifications
Recording format:
PCM audio format, WAV format (extension: .wav) 44.1 kHz@16-bit
Available recording time:
Maximum approx. 20 minutes (Internal Memory size is 120 MB)
Total number of tracks:
Up to 100 tracks
Tuning:
12 note equal temperament
Detection range:
C1 (32.70 Hz) ~ C8 (4186 Hz), Using Sine Wave.
Reference tone:
C3 (130.81 Hz) ~ C6 (1046.50Hz), 3 Octave.
Tuning Mode:
Meter Mode (AUTO), Sound Out Mode (MANUAL), Sound Back Mode (AUTO)
Calibration range:
A4 = 410 ~ 480 Hz (1 Hz steps)
Detection accuracy:
+/- 1 cent
Sound precision:
+/-1 cent
Tempo range:
Quarter Note = 30 to 252 BPM
Tempo setting:
3 Types: Pendulum Step
Full Step
Tap Tempo
Beat range:
Total 10 beats: "0 to 9" as "Quarter-note" Rhythm
Rhythm pattern:
Duplets, triplets, triplets without the center beat, quadruplets, and quadruplets without the center beats
Tempo accuracy:
±0.3%
Terminals:
Input (f6.3mm, Mono-Standard Jack type)
Headphones (f3.5mm, Stereo-mini Jack type)
USB (mini-Type B)
Internal Speaker:
Dynamic Speaker (f28 mm)
Power (Battery):
AAA battery (3.0 V) x 2
Manganese batteries or alkaline batteries, Ni-MH: Nickel metal hydride
Battery Life:
Recorder ... Approximately 16/13/11 hours
(Backlight: off/soft/auto, using alkaline batteries. Maximum of 20 minutes per
recording.)
Tuner ... Approximately 24/22/20 hours
(Backlight: off/soft/auto, A4 continuous input, using alkaline batteries)
Metronome ... Approximately 18/16/14 hours
(Backlight: off/soft/auto, tempo 120, 4 beats, maximum volume, using alkaline batteries)
Dimensions (W x D x H):
111 x 82 x 18 mm / 4/37 x 3.23 x 0.71 inches
Weight:
119 g / 4.19 oz (Including battery)
Included items:
AAA battery (3.0 V) x 2 for verifying proper operation
USB Cable
Options:
Contact Mic = CM-100L
Computer Requirements
Windows:
A computer that satisfies the operating requirements of Microsoft Windows XP/Windows Vista/Windows 7 and is equipped with a USB port
Macintosh:
Mac OS X 10.5 or later
Specifications
General
Recording media CompactFlash card
Tested media SanDisk Extreme IV 4 GB, 8 GB, 16 GB
SanDisk Extreme 4 GB, 8 GB, 16 GB
File system FAT32
File format BWF (single-channel, multi-channel)
Number of audio channels 8 channels at 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
8 channels + stereo mix at 44.1 kHZ, 48 kHz
4 channels at 176.4 kHz, 192 kHz
Quantization bit rates 16 bit/24 bit
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1% pull-up/pull-down)
Reference clock Internal, Word in, Video in,
Digital in (CH 1-2, CH 3-4, CH 5-6, CH 7-8)
Timecode frame rates 23.976, 24, 25, 29.97 DF, 29.97 NDF, 30 DF, 30 NDF
Built-in mic Omni directional, monaural
Low cut filter Cut-off frequency: 40/80/120 Hz
Slope: –12/–18 dB/oct
Analogue audio inputs and outputs
MIC IN/LINE IN connectors (1–8) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance (LINE) 10 kOhm
Nominal input level (LINE) + 6 dBu (Ref. level: –9 dB)
+ 4 dBu (Ref. level: Other than –9 dB)
Maximum input level (LINE) Selectable: +15 dBu, +18 dBu, +20 dBu, + 22 dBu, +24 dBu
Input impedance (MIC –25) 2.4 kOhm
Minimum input level (MIC –25) –45 dBu
Maximum iput level (MIC –25) +11 dBu
Input impedance (MIC 0) 2.4 kOhm
Minimum input level (MIC 0) –70 dBu
Maximum input level (MIC 0) –14 dBu
LINE OUT connectors (L/R) XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance 100 Ohm or less
Nominal output level +6 dBu (Ref. level: –9 dB)
Nominal output level +4 dBu (Ref. level: Other than –9 dB)
Maximum output level Selectable: +15 dBu, +18 dBu, +20 dBu, +22 dBu, +24 dBu
PHONES connector 6.3-mm stereo phone jack
Maximum output power 100 mW + 100 mW or more (THD+N: 1 % or less, at 32 Ohm)
Digital audio inputs and outputs
DIGITAL I/O connector D-Sub, 25-pin connector
Format AES3-2003/IEC60958-4 (AES/EBU)
Minimum input voltage 200 mVpp
Maximum input voltage 7 Vpp
Output voltage 3.5 Vpp
DIGITAL OUT connectors BNC
Format AES3-2003/AES-3id-2001 (AES/EBU)
Output voltage 1 Vpp at 75 Ohm
Control inputs and outputs
EXT DC IN connector XLR-4-32 (1: –, 2: NC, 3: NC, 4: +)
Input voltage 11–16 V (2 A)
CASCADE/WORD/VIDEO IN connector BNC
Input voltage 5 V TTL equivalent
Input impedance 75 Ohm ±10 %
Allowable frequency deviation of external sync ±100 ppm
CASCADE/WORD OUT connector BNC
Output voltage 5 V TTL equivalent
Output impedance 75 Ohm ±10 %
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1 % pull-up/pull-down)
TIME CODE IN connector BNC
Input voltage 0.5–5 Vpp
Input impedance 10 kOhm
TIME CODE OUT connector BNC
Output voltage 2.0 Vpp
Output impedance 600 Ohm
USB port USB B-type, 4-pin
Format USB2.0 HIGH SPEED (480 MBit/s)
KEYBOARD connector Mini-DIN connector (PS/2)
Audio performance
Frequency response (MIC/LINE IN to LINE OUT)
All sample rates 20 Hz – 20 kHz, 0 dB (±0.5 dB)
88.2/96 kHz sample rates at 40 kHz –1 dB (±1.0 dB)
176.4/192 kHz sample rates at 80 kHz –3 dB (+1/–2 dB)
Distortion
LINE IN to LINE OUT 0.003 % or less (–20 dB reference level, +23 dBu input, 1 kHz, AES-17 LPF)
MIC IN (MIC –25) to LINE OUT 0.02 % or less (–20 dB reference level, –10 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
MIC IN (MIC 0) to LINE OUT 0.02 % or less (–20 dB reference level, –35 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
S/N ratio
LINE IN to LINE OUT 110 dB(A) or more (22 kHz LPF)
MIC IN (MIC –25 or MIC 0) to LINE OUT 100 dB(A) or more (22 kHz LPF)
Computer compatibility
Windows Windows XP, Windows Vista, Windows 7
CPU Pentium 300 MHz or faster
Memory 128 MB or more
USB USB 2.0 port
Macintosh Macintosh Mac OS X 10.2 or later
CPU Power PC G3, G4, Intel Mac 266 MHz or faster
Memory 64 MB or more
USB USB 2.0 port
Recommended USB host controller Intel chipset
Power supply and other specifications
Power requirements 100–240 V AC, 50–60 Hz (AC adaptor PS-1225L)
10 AA batteries (Alkaline or NiMH)
External DC battery (DC 11–16 V, 2 A or more)
Battery operation time (continuous operation) Measured according to JEITA standard at 48 kHz, 24-bit, 8 ch playback or recording, phantom power off. Varies with operating conditions.
NP type battery (Li-Ion: 14.8 V/4.6 Ah) About 5 hours
AA type batteries (NiMH) About 2 hours
Power consumption 18 W
Dimensions (W x H x D) 270 mm x 100 mm x 260 mm (excluding protrusions)
Weight 3.65 kg (excluding batteries)
Operating temperature range 0–40 ºC
UR-80: 24 Bit/96 kHz USB Recording System
Features
Over forty assignable controls
Up to 24-bit/96KHz recording
2x XLR/TRS combo jack with qualified microphone preamp & phantom power
Included HQ-GM2, HyperCanvas software synthesizer
ASIO2.0/WDM, MacOS X compatible drivers, low-latency support.
UR-80 Editor Software Included
V-Link support
Knob8Fader9Rotary Encoder1Button25LED10Number of Memory SetsPreset1User7Number of Audio Record/Playback Channels (Full duplex (except for 96 kHz setting))Record2 channels (stereo)Playback2 channels (stereo)Signal ProcessingAD/DA Conversion24 bits (linear)PC interface24 bitsSampling Frequency24 bitsDigital output44.1/48/96 kHzDigital input32/44.1/48/96 kHz* Built-in realtime sample rate converterAD/DA Conversion44.1/48/96 kHzFrequency Response96.0 kHz20 Hz to 40 kHz (+0 dB/-2 dB)48.0 kHz20 Hz to 22 kHz (+0 dB/-2 dB)44.1 kHz20 Hz to 20 kHz (+0 dB/-2 dB)Nominal Input Level (variable)Input Jack 1, 2 (XLR type)-50 to -10 dBuInput Jack 1, 2 (1/4 inch TRS phone type)-35 to +4 dBuInput ImpedanceInput Jack 1, 2 (XLR type)5 k ohmsInput Jack 1, 2 (1/4 inch TRS phone type, Lo-Z)32 k ohmsInput Jack 2 (Hi-Z)1 M ohmsNominal Output LevelOutput Jack0 dBuOutput ImpedanceOutput Jack1 k ohmsHeadphones160 ohmsResidual Noise LevelOutput Jack-90 dBu or less
(input terminated with 1 k ohms, OUTPUT VOLUME: max., INPUT SENS = min., INPUT MONITOR = min., IHF-A, typ.)InterfaceUSB
Digital input/output Coaxial type
Optical type(conforms to S/P DIF)ConnectorsInput Jack 1, 2 (XLR type (phantom power)
1/4 inch TRS phone type)
Digital In Connectors (Coaxial type, Optical type)
Digital Out Connectors (Coaxial type, Optical type)
Headphones Jack (Stereo 1/4 inch phone type)
Output Jack L/R (RCA phone type)OthersPower SupplyAC adaptorCurrent Draw1000 mAAccessoriesInstallation Guide
Owner's Manual
USB cable
AC adaptor
CD-ROM
Overlay Sheets with Application LabelsSize and WeightWidth379 mm14-15/16 inchesDepth239 mm9-7/16 inchesHeight84 mm3-5/16 inchesWeight1.7 kg3 lbs. 11 oz.
* 8-track Digital Portastudio with CD Burner * Records to SD/SDHC Card media * Import audio tracks from CD * Built-in stereo condenser microphone * Two XLR microphone inputs with phantom power * 1/4" stereo line inputs * Switchable instrument-level input for guitar/bass direct recording * Multi-band mastering effects * 2-band EQ per track * Internal reverb processor with dedicated send per track * Chromatic Tuner and Metronome * Track editing, autopunch and bounce features * Optional RC-3F footswitch offers three switches for punch-in and transport operation * Compact and lightweight * Dimensions: 11.4" W x 2.1" H x 8.2" D * Weight: 4lbs
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.