Features at a glance
Network functions / control functions
- FTP Client function enables automatic uploading of recorded files or downloading audio files from the server
- Event List for recording, playback, download and other functions can be operated automatically based on the time set
- Time setting via SNTP Client function enables event management with more accuracy
- Automatic Upload function enables recorded files to be uploaded automatically
- iOS / Android control apps available: allowing transport operations and remote control of various settings
- The IF-DA2 interface card supporting Dante 2ch input and output can be installed (sold separately)
- Serial and parallel port connections
- RC-SS150 Flash Start control unit with the a color LCD screen (sold separately)
- Optional RC-3F footswitch can be connected to the RC-20 remote control
Recording capabilities
- Supports recording and playback of high-resolution files up to 96kHz / 24bit
- Dual SD memory card slot permits mirror and relay recording
- Auto mark function: When an error occurs or input level overloads, the time point will be marked automatically
- PRE REC function to prevent any missing part in your recording
- Auto track function automatically trims the tracks
- Compressor and limiter included
- Auto level control function automatically adjusts the input level for recording
- Starts recording as soon as the unit is turned on with Power-on-record function
- Microphone input connector with phantom power supply
- Direct recording function enables the recording starts right away without any standby
Playback functions
- Call function that saves the position where your last playback starts
- Playback modes such as Program, Random, and Single
- Ducking function automatically adjusts the playback volume while the input level increases or decreases
- All repeat / A-B repeat function
- Incremental play function to transport to the beginning of the next track
- Monaural mix playback function
- Auto Cue function tracks the first sound in the playback for standby
- Auto ready function allows a standby before the next track begins
- Pitch control and key control function for speed and key adjustments
- Can set the mark at any position
- EOM (End of message) notification available before the track ends
Other features
- Sampling rate converter for inputs and outputs are available
- Link playback function allows two units to be operated at the same time
- Automatic file closing process to avoid data loss if there is a sudden power loss during recording
- User presets: Up to three sets of optional settings can be stored for such things as switching input and output, sampling rate selection and other functions
- 1U rack-mount size
SS-CDR250N SPECIFICATIONS
SS-CDR250N | SS-R250N | |
Recording/Playback media | ||
SD | SDHC card (4GB to 32GB), SDXC card (64GB to 128GB) | |
USB | USB Flash memory (2GB to 64GB) | |
CD | CD-R, CD-RW | – |
File format | ||
CD-DA | 44.1kHz, 16bit | – |
MP3 | 44.1k/48k Hz, 64k/128k/192k/256k/320k bps | |
WAV | 44.1k/48k/96k Hz, 16/24 bit | |
Number of channels | 2(stereo), 1(mono) | |
Analog Audio inputs | ||
UNBALANCED | ||
Connector | RCA jacks | |
Nominal input level | -10dBV (0.316Vrms) | |
Maximum input level | +6dBV (2.0Vrms) | |
Input impedance | 10kΩ | |
BALANCED | ||
Connector | XLR-3-31, (1:GND, 2:HOT, 3:COLD), 6.3mm(1/4“) standard TRS stereo jack |
|
Line input | ||
Nominal input level | +4dBu(1.23Vrms, Ref.Level other than -9dBFS) +6dBu(1.55Vrms, Ref.Level -9dBFS) |
|
Maximum input level | +15dBu(4.36Vrms, Ref.Level -9dBFS) +18dBu(6.16Vrms, Ref.Level -14dBFS) +20dBu(7.75Vrms, Ref.Level -16dBFS) +22dBu(9.76Vrms, Ref.Level -18dBFS) +24dBu(12.28Vrms, Ref.Level -20dBFS) |
|
Input impedance | 10kΩ | |
Mic input | ||
Maximum input level | +4dBu (1.23Vrms) | |
Minimum input level | -70dBu (245uVrms) or more | |
Input impedance | 2.2kΩ | |
Analog Audio outputs | ||
UNBALANCED | ||
Connector | RCA jacks | |
Nominal input level | -10dBV (0.316Vrms) | |
Maximum input level | +6dBV (2.0Vrms) | |
Output impedance | 200Ω | |
BALANCED | ||
Connector | XLR-3-32, (1:GND, 2:HOT, 3:COLD) | |
Nominal input level | +4dBu(1.23Vrms) | |
Maximum input level | +15dBu(4.36Vrms, Ref.Level -9dBFS) +18dBu(6.16Vrms, Ref.Level -14dBFS) +20dBu(7.75Vrms, Ref.Level -16dBFS) +22dBu(9.76Vrms, Ref.Level -18dBFS) +24dBu(12.28Vrms, Ref.Level -20dBFS) |
|
Output impedance | 200Ω | |
Digital Audio inputs | ||
AES/EBU | ||
Connector | XLR-3-31 | |
Input impedance | 110Ω | |
Format | AES3-2003/IEC60958-4(AES/EBU) | |
Supported sampling frequencies | 44.1k / 48k / 96k Hz | |
S/PDIF | ||
Connector | RCA jack | |
Format | IEC60958-3 | |
Supported sampling frequencies | 32k to 96k Hz | |
Digital Audio outputs | ||
AES/EBU | ||
Connector | XLR-3-32 | |
Output impedance | 110Ω | |
Format | AES3-2003/IEC60958-4(AES/EBU) | |
Supported sampling frequencies | 44.1k / 48k / 96k Hz | |
S/PDIF | ||
Connector | RCA jack | |
Format | IEC60958-3 | |
Control input/output | ||
REMOTE (FRONT) | ||
Connector | 2.5mmTRS jack (TASCAM RC-3F, RC-20 sold separately) | |
RS-232C | ||
Connector | D-sub 9 pin | |
PARALLEL | ||
Connector | D-sub 25 pin | |
PHONES | ||
Connector | Standard 6.3mm (1/4“) stereo jack | |
Maximum output | 45mW+45mW(THD+N 0.1% or less, into 32Ω load) | |
Power | AC 100V to 240V, 50/60Hz | |
Power consumption | 22W | 20W |
Dimensions | 482.6(W)×45(H)×300.5(D)mm | |
Weight | 3.2kg | 2.9kg |
Operating temperature range | 5 to 35˚C | |
Included items | AC power code, RC-10 remote control unit, rack-mounting screw kit, security screw kit, Owner\’s manual (with warranty) |
Audio performance
Frequency response | 20Hz to 20kHz, +0.5/-0.5dB(JEITA) 20Hz to 40kHz, +0.5/-3dB (JEITA) |
Distortion | 0.002% or less(Ref:-16dB/BALANCED,JEITA) |
S/N ratio | 106dB or more (JEITA) |
Dynamic range | 106dB or more (JEITA) |
Crosstalk | 100dB or more (JEITA) |
EIN(equivalent input noise) | -125dBu or less (40Ω 20kHzLPF) |
Reviews
There are no reviews yet.