Features at a glance Network functions / control functions FTP Client function enables automatic uploading of recorded files or downloading audio files from the server Event List for recording, playback, download and other functions can be operated automatically based on the time set Time setting via SNTP Client function enables event management with more accuracy […]
FTP Client function enables automatic uploading of recorded files or downloading audio files from the server
Event List for recording, playback, download and other functions can be operated automatically based on the time set
Time setting via SNTP Client function enables event management with more accuracy
Automatic Upload function enables recorded files to be uploaded automatically
iOS / Android control apps available: allowing transport operations and remote control of various settings
The IF-DA2 interface card supporting Dante 2ch input and output can be installed (sold separately)
Serial and parallel port connections
RC-SS150 Flash Start control unit with the a color LCD screen (sold separately)
Optional RC-3F footswitch can be connected to the RC-20 remote control
Recording capabilities
Supports recording and playback of high-resolution files up to 96kHz / 24bit
Dual SD memory card slot permits mirror and relay recording
Auto mark function: When an error occurs or input level overloads, the time point will be marked automatically
PRE REC function to prevent any missing part in your recording
Auto track function automatically trims the tracks
Compressor and limiter included
Auto level control function automatically adjusts the input level for recording
Starts recording as soon as the unit is turned on with Power-on-record function
Microphone input connector with phantom power supply
Direct recording function enables the recording starts right away without any standby
Playback functions
Call function that saves the position where your last playback starts
Playback modes such as Program, Random, and Single
Ducking function automatically adjusts the playback volume while the input level increases or decreases
All repeat / A-B repeat function
Incremental play function to transport to the beginning of the next track
Monaural mix playback function
Auto Cue function tracks the first sound in the playback for standby
Auto ready function allows a standby before the next track begins
Pitch control and key control function for speed and key adjustments
Can set the mark at any position
EOM (End of message) notification available before the track ends
Other features
Sampling rate converter for inputs and outputs are available
Link playback function allows two units to be operated at the same time
Automatic file closing process to avoid data loss if there is a sudden power loss during recording
User presets: Up to three sets of optional settings can be stored for such things as switching input and output, sampling rate selection and other functions
1U rack-mount size
SS-CDR250N SPECIFICATIONS
SS-CDR250N
SS-R250N
Recording/Playback media
SD
SDHC card (4GB to 32GB), SDXC card (64GB to 128GB)
USB
USB Flash memory (2GB to 64GB)
CD
CD-R, CD-RW
–
File format
CD-DA
44.1kHz, 16bit
–
MP3
44.1k/48k Hz, 64k/128k/192k/256k/320k bps
WAV
44.1k/48k/96k Hz, 16/24 bit
Number of channels
2(stereo), 1(mono)
Analog Audio inputs
UNBALANCED
Connector
RCA jacks
Nominal input level
-10dBV (0.316Vrms)
Maximum input level
+6dBV (2.0Vrms)
Input impedance
10kΩ
BALANCED
Connector
XLR-3-31, (1:GND, 2:HOT, 3:COLD), 6.3mm(1/4“) standard TRS stereo jack
Line input
Nominal input level
+4dBu(1.23Vrms, Ref.Level other than -9dBFS) +6dBu(1.55Vrms, Ref.Level -9dBFS)
FTP Client function enables automatic uploading of recorded files or downloading audio files from the server
Event List for recording, playback, download and other functions can be operated automatically based on the time set
Time setting via SNTP Client function enables event management with more accuracy
Automatic Upload function enables recorded files to be uploaded automatically
iOS / Android control apps available: allowing transport operations and remote control of various settings
The IF-DA2 interface card supporting Dante 2ch input and output can be installed (sold separately)
Serial and parallel port connections
RC-SS150 Flash Start control unit with the a color LCD screen (sold separately)
Optional RC-3F footswitch can be connected to the RC-20 remote control
Recording capabilities
Supports recording and playback of high-resolution files up to 96kHz / 24bit
Dual SD memory card slot permits mirror and relay recording
Auto mark function: When an error occurs or input level overloads, the time point will be marked automatically
PRE REC function to prevent any missing part in your recording
Auto track function automatically trims the tracks
Compressor and limiter included
Auto level control function automatically adjusts the input level for recording
Starts recording as soon as the unit is turned on with Power-on-record function
Microphone input connector with phantom power supply
Direct recording function enables the recording starts right away without any standby
Playback functions
Call function that saves the position where your last playback starts
Playback modes such as Program, Random, and Single
Ducking function automatically adjusts the playback volume while the input level increases or decreases
All repeat / A-B repeat function
Incremental play function to transport to the beginning of the next track
Monaural mix playback function
Auto Cue function tracks the first sound in the playback for standby
Auto ready function allows a standby before the next track begins
Pitch control and key control function for speed and key adjustments
Can set the mark at any position
EOM (End of message) notification available before the track ends
Other features
Sampling rate converter for inputs and outputs are available
Link playback function allows two units to be operated at the same time
Automatic file closing process to avoid data loss if there is a sudden power loss during recording
User presets: Up to three sets of optional settings can be stored for such things as switching input and output, sampling rate selection and other functions
1U rack-mount size
SS-CDR250N SPECIFICATIONS
SS-CDR250N
SS-R250N
Recording/Playback media
SD
SDHC card (4GB to 32GB), SDXC card (64GB to 128GB)
USB
USB Flash memory (2GB to 64GB)
CD
CD-R, CD-RW
-
File format
CD-DA
44.1kHz, 16bit
-
MP3
44.1k/48k Hz, 64k/128k/192k/256k/320k bps
WAV
44.1k/48k/96k Hz, 16/24 bit
Number of channels
2(stereo), 1(mono)
Analog Audio inputs
UNBALANCED
Connector
RCA jacks
Nominal input level
-10dBV (0.316Vrms)
Maximum input level
+6dBV (2.0Vrms)
Input impedance
10kΩ
BALANCED
Connector
XLR-3-31, (1:GND, 2:HOT, 3:COLD), 6.3mm(1/4“) standard TRS stereo jack
Line input
Nominal input level
+4dBu(1.23Vrms, Ref.Level other than -9dBFS) +6dBu(1.55Vrms, Ref.Level -9dBFS)
Number of channels: 4-channel (stereo × 2, mono × 4)
Analog audio input
• Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4“)TRS standard jack
Set to "MIC / MIC+PHANTOM“
• Input impedance: 2k ohms
• Phantom power: 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
• Maximum input level: 0dBu
• Minimum input level: -72dBu
• MIC input gain: TRIM MAX
• LOW: +11dB
• HIGH: +51dB
• HI + PLUS: +63dB
Set to "LINE“
• Input impedance: 10k ohms or more
• Standard input level: +4dBu
• Maximum input level: +20dBu
1/2 connector
• Connector: 3.5mm(1/8“)stereo mini jack (this connector can be supplied plug-in power)
• Input impedance: 10k ohms
• Maximum input level: +10dBV
• Minimum input level: -50dBV
• MIC input gain: TRIM MAX
• LOW: +3dB
• HIGH: +26dB
• HI + PLUS: +38dB
CAMERA IN connector
• Connector: 3.5mm(1/8“)stereo mini jack
• Input impedance: 10k ohms
• Standard input level: -10dBV
• Maximum input level: +6dBV
Analog audio output
LINE OUT connector
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -10dBV
• Maximum output level: +6dBV
CAMERA OUT connector
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -40dBV
• Maximum output level: -24dBV
PHONES connector
• Connector: 3.5mm(1/8“)stereo mini jack
• Maximum output level: 20mW + 20mW
USB
• Connector: Micro-B type
• Format: USB2.0 HIGH SPEED mass storage class
REMOTE Connector: 2.5mm TRS jack
Power: 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
Power consumption: 5.0W
Continuous operation time: 2ch WAV, 44.1kHz, 16bit rec, Phantom power not used
Dimensions: 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached)
Weight: 625g ( including batteries) / 530g (without batteries )
The DNRP-WRC provides two button record control and visual status indication of a connected Denon® DN-F450R/F650R recorder.
The mouse sized unit, once connecte to the recorder using its integral 5 metre lead, can be placed in a convenient location on a board/ meeting room table to allow the recording of conferences and discussions. Visual indication of recorder status is provided by high brightness red and green indicators located around the RECORD button, which show STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE. The two button control allows the recorder to be placed into record mode, create a new record mark and stop the recording process.
The DNRP-WRC is primarily for the simple control of audio recording in areas where conversations, discussions or conferences are taking place. The unit allows the DNF450R/F650R recorder to be placed out of sight to prevent media tampering or access to all the recorder controls.
Simple unobtrusive controller for the recording of audio in board/meeting rooms
Easy connection to Denon DN-F450R/F650R recorder serial (RS232) port
Provides bright visual indication of STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE
RECORD and STOP buttons allow simple control without the need to access the recorder
Ergonomic visually pleasing design with internal weight to prevent table slip
Ultra low power consumption, no need for additional power adaptor
Fully sealed label provides protection against drink spills
Specifications
General
Recording media CompactFlash card
Tested media SanDisk Extreme IV 4 GB, 8 GB, 16 GB
SanDisk Extreme 4 GB, 8 GB, 16 GB
File system FAT32
File format BWF (single-channel, multi-channel)
Number of audio channels 8 channels at 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
8 channels + stereo mix at 44.1 kHZ, 48 kHz
4 channels at 176.4 kHz, 192 kHz
Quantization bit rates 16 bit/24 bit
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1% pull-up/pull-down)
Reference clock Internal, Word in, Video in,
Digital in (CH 1-2, CH 3-4, CH 5-6, CH 7-8)
Timecode frame rates 23.976, 24, 25, 29.97 DF, 29.97 NDF, 30 DF, 30 NDF
Built-in mic Omni directional, monaural
Low cut filter Cut-off frequency: 40/80/120 Hz
Slope: –12/–18 dB/oct
Analogue audio inputs and outputs
MIC IN/LINE IN connectors (1–8) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance (LINE) 10 kOhm
Nominal input level (LINE) + 6 dBu (Ref. level: –9 dB)
+ 4 dBu (Ref. level: Other than –9 dB)
Maximum input level (LINE) Selectable: +15 dBu, +18 dBu, +20 dBu, + 22 dBu, +24 dBu
Input impedance (MIC –25) 2.4 kOhm
Minimum input level (MIC –25) –45 dBu
Maximum iput level (MIC –25) +11 dBu
Input impedance (MIC 0) 2.4 kOhm
Minimum input level (MIC 0) –70 dBu
Maximum input level (MIC 0) –14 dBu
LINE OUT connectors (L/R) XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance 100 Ohm or less
Nominal output level +6 dBu (Ref. level: –9 dB)
Nominal output level +4 dBu (Ref. level: Other than –9 dB)
Maximum output level Selectable: +15 dBu, +18 dBu, +20 dBu, +22 dBu, +24 dBu
PHONES connector 6.3-mm stereo phone jack
Maximum output power 100 mW + 100 mW or more (THD+N: 1 % or less, at 32 Ohm)
Digital audio inputs and outputs
DIGITAL I/O connector D-Sub, 25-pin connector
Format AES3-2003/IEC60958-4 (AES/EBU)
Minimum input voltage 200 mVpp
Maximum input voltage 7 Vpp
Output voltage 3.5 Vpp
DIGITAL OUT connectors BNC
Format AES3-2003/AES-3id-2001 (AES/EBU)
Output voltage 1 Vpp at 75 Ohm
Control inputs and outputs
EXT DC IN connector XLR-4-32 (1: –, 2: NC, 3: NC, 4: +)
Input voltage 11–16 V (2 A)
CASCADE/WORD/VIDEO IN connector BNC
Input voltage 5 V TTL equivalent
Input impedance 75 Ohm ±10 %
Allowable frequency deviation of external sync ±100 ppm
CASCADE/WORD OUT connector BNC
Output voltage 5 V TTL equivalent
Output impedance 75 Ohm ±10 %
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1 % pull-up/pull-down)
TIME CODE IN connector BNC
Input voltage 0.5–5 Vpp
Input impedance 10 kOhm
TIME CODE OUT connector BNC
Output voltage 2.0 Vpp
Output impedance 600 Ohm
USB port USB B-type, 4-pin
Format USB2.0 HIGH SPEED (480 MBit/s)
KEYBOARD connector Mini-DIN connector (PS/2)
Audio performance
Frequency response (MIC/LINE IN to LINE OUT)
All sample rates 20 Hz – 20 kHz, 0 dB (±0.5 dB)
88.2/96 kHz sample rates at 40 kHz –1 dB (±1.0 dB)
176.4/192 kHz sample rates at 80 kHz –3 dB (+1/–2 dB)
Distortion
LINE IN to LINE OUT 0.003 % or less (–20 dB reference level, +23 dBu input, 1 kHz, AES-17 LPF)
MIC IN (MIC –25) to LINE OUT 0.02 % or less (–20 dB reference level, –10 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
MIC IN (MIC 0) to LINE OUT 0.02 % or less (–20 dB reference level, –35 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
S/N ratio
LINE IN to LINE OUT 110 dB(A) or more (22 kHz LPF)
MIC IN (MIC –25 or MIC 0) to LINE OUT 100 dB(A) or more (22 kHz LPF)
Computer compatibility
Windows Windows XP, Windows Vista, Windows 7
CPU Pentium 300 MHz or faster
Memory 128 MB or more
USB USB 2.0 port
Macintosh Macintosh Mac OS X 10.2 or later
CPU Power PC G3, G4, Intel Mac 266 MHz or faster
Memory 64 MB or more
USB USB 2.0 port
Recommended USB host controller Intel chipset
Power supply and other specifications
Power requirements 100–240 V AC, 50–60 Hz (AC adaptor PS-1225L)
10 AA batteries (Alkaline or NiMH)
External DC battery (DC 11–16 V, 2 A or more)
Battery operation time (continuous operation) Measured according to JEITA standard at 48 kHz, 24-bit, 8 ch playback or recording, phantom power off. Varies with operating conditions.
NP type battery (Li-Ion: 14.8 V/4.6 Ah) About 5 hours
AA type batteries (NiMH) About 2 hours
Power consumption 18 W
Dimensions (W x H x D) 270 mm x 100 mm x 260 mm (excluding protrusions)
Weight 3.65 kg (excluding batteries)
Operating temperature range 0–40 ºC
* 8-track Digital Portastudio with CD Burner * Records to SD/SDHC Card media * Import audio tracks from CD * Built-in stereo condenser microphone * Two XLR microphone inputs with phantom power * 1/4" stereo line inputs * Switchable instrument-level input for guitar/bass direct recording * Multi-band mastering effects * 2-band EQ per track * Internal reverb processor with dedicated send per track * Chromatic Tuner and Metronome * Track editing, autopunch and bounce features * Optional RC-3F footswitch offers three switches for punch-in and transport operation * Compact and lightweight * Dimensions: 11.4" W x 2.1" H x 8.2" D * Weight: 4lbs
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.