TASCAM TM-2X Condenser microphone for DSLR

Discontinued

103.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The directional condenser microphones equipped on the TM-2X are the same mics used in our highly-regarded DR-series recorders. The X-Y pattern and two mic capsules are ideal for capturing a true representation of the sonic atmosphere, whether it\’s sound from a wide area or directly in front of the camera. As a result, the TM-2X […]

 

Read more

The directional condenser microphones equipped on the TM-2X are the same mics used in our highly-regarded DR-series recorders. The X-Y pattern and two mic capsules are ideal for capturing a true representation of the sonic atmosphere, whether it\’s sound from a wide area or directly in front of the camera. As a result, the TM-2X records pristine sound that fits naturally with the recorded video.
Setup is as simple as connecting the cord from the TM-2X to the camera\’s mic input jack allowing you to add high-quality audio to video. The output can be set to one of two levels to enable compatibility with a variety of cameras.

TM-2X SPECIFICATIONS

Microphone type cardioid
Frequency range 50Hz to 20kHz
Input output ratings
Maximum input level 120dB SPL (at 1kHz, SENS:H, LCF=Flat, RL:2.2kΩ, Vcc:2.5V)
Output impedance 1.6k ohms (RL:2.2kΩ, Vcc:2.5V)
S/N ratio 74dB (at 1kHz, 1Pa, A weighted)
Mic sensitivity switch SENS H:-37dB, SENS L:-52dB
(at 1kHz, 0dB=1V/Pa, RL:2.2kΩ, Vcc:2.5V)
Connection cable/plug
Cable length 33cm
Plug 3.5 mm (1/8\’“) TRS stereo mini plug
(Tip: left channel, Ring: right channel, Sleeve: GND)
Power Plug-in power (JEITA standard CP-1203A)
Dimensions
TM-2X main unit 57(W)×59(H)×69(D)mm(not including cable and connectors)
Noise isolation arm 34(W)×57(H)×142(D)mm
Weight
TM-2X main unit 75g
Noise isolation arm 41g
Operating temerature -5 to 45˚C
23 to 142˚F
Accessories Fur windscreen, noise isolation arm, Owner\’s Manual, warranty
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “TASCAM TM-2X Condenser microphone for DSLR”

Your email address will not be published. Required fields are marked *

Quick Comparison

TASCAM TM-2X Condenser microphone for DSLR removeSENNHEISER MD-42 Reporting Dynamic Microphone removeAUDIO TECHNICA BP4073 BROADCASTING MICROPHONE 9.17" long removeSENNHEISER MD-46 Reporting Dynamic Microphone removeEDIROL CS-15 Condenser Stereo Microphone removeAUDIO TECHNICA AT897 SHOTGUN BROADCASTING MICROPHONE WITH BATTERY remove
NameTASCAM TM-2X Condenser microphone for DSLR removeSENNHEISER MD-42 Reporting Dynamic Microphone removeAUDIO TECHNICA BP4073 BROADCASTING MICROPHONE 9.17" long removeSENNHEISER MD-46 Reporting Dynamic Microphone removeEDIROL CS-15 Condenser Stereo Microphone removeAUDIO TECHNICA AT897 SHOTGUN BROADCASTING MICROPHONE WITH BATTERY remove
Image
SKUTAEM000566H10SE00127BP4073H10SE00078CS15AT897
Rating
Price 103.00 incl. GR VAT 199.00 incl. GR VAT 929.00 incl. GR VAT 255.00 incl. GR VAT 117.32 incl. GR VAT 240.00 incl. GR VAT
Stock

Out of stock

In stock

In stock

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockIn stockIn stockAvailable on backorderAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe directional condenser microphones equipped on the TM-2X are the same mics used in our highly-regarded DR-series recorders. The X-Y pattern and two mic capsules are ideal for capturing a true representation of the sonic atmosphere, whether it\'s sound from a wide area or directly in front of the camera. As a result, the TM-2X records pristine sound that fits naturally with the recorded video. Setup is as simple as connecting the cord from the TM-2X to the camera\'s mic input jack allowing you to add high-quality audio to video. The output can be set to one of two levels to enable compatibility with a variety of cameras. TM-2X SPECIFICATIONS
Microphone type cardioid
Frequency range 50Hz to 20kHz
Input output ratings
Maximum input level 120dB SPL (at 1kHz, SENS:H, LCF=Flat, RL:2.2kΩ, Vcc:2.5V)
Output impedance 1.6k ohms (RL:2.2kΩ, Vcc:2.5V)
S/N ratio 74dB (at 1kHz, 1Pa, A weighted)
Mic sensitivity switch SENS H:-37dB, SENS L:-52dB (at 1kHz, 0dB=1V/Pa, RL:2.2kΩ, Vcc:2.5V)
Connection cable/plug
Cable length 33cm
Plug 3.5 mm (1/8\'“) TRS stereo mini plug (Tip: left channel, Ring: right channel, Sleeve: GND)
Power Plug-in power (JEITA standard CP-1203A)
Dimensions
TM-2X main unit 57(W)×59(H)×69(D)mm(not including cable and connectors)
Noise isolation arm 34(W)×57(H)×142(D)mm
Weight
TM-2X main unit 75g
Noise isolation arm 41g
Operating temerature -5 to 45˚C 23 to 142˚F
Accessories Fur windscreen, noise isolation arm, Owner\'s Manual, warranty

The MD 42 is a high-quality reporter's microphone with omni-directional pick-up pattern. It has been specially optimised for rough use in live reporting and broadcasting environments. The MD 42 is a very 'good-natured' microphone whose design avoids wind and handling noise problems. Colour: black, sound inlet basket: refined steel, black.
Features

    Two-ply sound inlet basket provides increased protection from wind and pop noise
    Rugged metal housing
    Rubber mounted capsule (or Elastically mounted capsule) ensures low sensitivity to handling noise
    Omni-directional pick-up pattern ensures excellent speech intelligibility without having to point the microphone directly at your interview partner

Pick Up Pattern omni-directional

Frequency response 40 - 18 000 Hz

Sensitivity 2,0 mV/Pa

Ιmpedance 1000 Ohm

Dimensions Ø 49 x 250 mm

Weight 360 gr

With an overall length of just 9.17" and weight of just 3.5 oz, this microphone adds virtually no heft to the end of a fish pole or the top of a minicam. Through the use of an innovative Audio-Technica design, the interference tube of the BP4073 provides a narrow acceptance angle, effective for long-distance pickup. The highly directional mics offer low self-noise and are fully RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

Designed for use in broadcasting, film/TV production and theater sound reinforcement applications
Direct-coupled, balanced output ensures a clean signal even in high-output conditions
Innovative acoustic design provides same directivity as mics up to 50% longer
Switchable 80 Hz hi-pass filter & 10 dB pad
Rugged housing made of lightweight structural-grade aluminum alloy
RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

 

Element: Externally polarized (DC bias) capacitor
Polar Pattern: Line + gradient
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 128 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 81 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 48V DC, 4.8 mA typical
Weight: 99 g (3.5 oz)
Dimensions: 233.0 mm (9.17“) long, 21.0 mm (0.83“) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8144 windscreen; two O-Rings; protective carrying case 

The MD 46 is a high-quality reporter's microphone with cardioid pick-up pattern. It has been specially optimised for rough use in live reporting and broadcasting environments. The MD 46 is a very 'good-natured' microphone whose design avoids wind and handling noise problems. Colour: black, sound inlet basket: refined steel, black.

Features
  • Two-ply sound inlet basket provides increased protection from wind and pop noise
  • Rugged metal housing
  • Rubber mounted capsule ensures low sensitivity to handling noise
  • Cardioid pick up pattern ensures excellent speech intelligibility even with high ambient noise levels
Type: Dynamic, Reporting
Pick Up Pattern: omni-directional
Frequency response: 40 - 18 000 Hz
Sensitivity: 2,0 mV/Pa
Ιmpedance: 350 Ohm
Dimensions: Ø 49 x 250 mm
Weight: 360 gr
Use: Video/Broadcast

For when you need even more advanced recording than R-09's built-in mic
CS-15CS-15 For serious field recording, the optional CS-15 cardioid-type stereo microphone is a great match for the R-09. For portability and convenience, the R-09 supplies the power to the mic. Bundled with the microphone are a desktop stand, a hand-held mount, and a windscreen.
    
Cardioid-type stereo microphone
    
Battery operation is also possible when using with a recorder that doesn't supply the power
    
Ideal combination with the R-09 --- also the UA-4FX and the UA-1EX
    
Comes with a desktop stand, a hand-held mount (can be attached to the microphone stand) and a windscreen

Audio-Technica's AT897 is designed for field audio acquisition in film/TV/video production, professional recording, wildlife recording and broadcast applications. It mounts conveniently on a DV camcorder without adding noticeable heft, and remains out of the frame even with compact digital cameras. This high-performance short shotgun offers outstanding long-distance audio pickup due to narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.

Designed for video production and broadcast (ENG/EFP) audio acquisition
Short length (11“) ensures mic stays out of the shot -- even when used with compact digital cameras
Smooth, natural-sounding on-axis audio quality
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Switchable low-frequency roll-off
Operates on battery or phantom power
RoHS compliant - free from all substances specified in the EU directive on hazardous substances

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Phantom: -40 dB (10.0 mV) re 1V at 1 Pa Battery: -41 dB (8.9 mV) re 1V at 1 Pa
Impedance: Phantom: 200 ohms Battery: 300 ohms
Maximum Input Sound Level: Phantom: 129 dB SPL, 1 kHz at 1% T.H.D. Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 112 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Flat, roll-off (recessed)
Weight: 5.1 oz (145 g)
Dimensions: 10.98" (279.0 mm) long, 0.83" (21.0 mm) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; AT8134 windscreen; battery; 5/8“-27 to 3/8“-16 threaded adapter; protective carrying case

Weight0.10 kg0.10 kg0.30 kg1.00 kg0.10 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.10 kg
Weight 0.30 kg
Weight 1.00 kg
Weight 0.10 kg
Weight 0.30 kg