Tascam TM-60 – Condenser Microphone

56.89 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Upon Request Upon Request SKU: TA/EM/000454 Category:
TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are […]

 

Read more

TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality.

Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.

Weight 0.23 kg

Reviews

There are no reviews yet.

Be the first to review “Tascam TM-60 – Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Tascam TM-60 - Condenser Microphone removeSENNHEISER ME-67 Capsule elecret super shotgun removeRODE NT-5-MP Matched Pair Condenser Microphones removeSENNHEISER ME-62 OMNI-DIRECTIONAL MIC CAPSULE for K6 and K6P POW removeFOSTEX MC10ST ELECTREC CONDENSER STEREO PAIR removeSENNHEISER E-945 SUPERCARDIOID DYNAMIC MICROPHONE remove
NameTascam TM-60 - Condenser Microphone removeSENNHEISER ME-67 Capsule elecret super shotgun removeRODE NT-5-MP Matched Pair Condenser Microphones removeSENNHEISER ME-62 OMNI-DIRECTIONAL MIC CAPSULE for K6 and K6P POW removeFOSTEX MC10ST ELECTREC CONDENSER STEREO PAIR removeSENNHEISER E-945 SUPERCARDIOID DYNAMIC MICROPHONE remove
ImageTascam TM-60 - Condenser Microphone
SKUTA/EM/000454H10SE00022H11RD00005H10SE00009MC10STH10SE00089
Rating
Price 56.89 incl. GR VAT 265.00 incl. GR VAT 329.00 incl. GR VAT 150.00 incl. GR VAT 181.99 incl. GR VAT 189.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

Only 2 left in stock

In stock

In stock

In stock

AvailabilityOnly 1 left in stock (can be backordered)In stockOnly 2 left in stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentTASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.

The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish.

Pick-up pattern : lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm (K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 343 mm
Weight : 100 g

The NT5 matched pairs are a masterpiece of small-diaphragm cardioid- condenser microphone design.Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a .5? capsule, an active J-FET impedance converter with bipolar output buffer. Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case with windshields and mounts. SPECIFICATIONS: Acoustic principle: Externally polarised single diaphragm Directional pattern: Cardioid Frequency range: 20Hz - 20kHz Output impedance: 100? Signal noise ratio din iec 651:  78dB Equvalent noise:  Maximum spl: 143 dB @ 1% THD into 1k_ Sensitivity: -38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL Power supply voltage:  P48 Supply (38V?52V), P24 Supply (20V-26V) Current consumption: 4 mA, 2 mA, Weight: 100g

The ME 62 is an omni-directional microphone head suitable for K6 and K6P
powering modules. It can be used for reporting, discussions and interviews.
The ME 62 is particularly suitable for good reproduction of 'room' ambience
and 'spaced omni' stereo recording. Matt black, anodised, scratch-resistant finish.

Features
Omni-directional pick-up pattern
Minimal inherent self-noise
Excellent rejection of rumble, wind and handling noise
Wide frequency response
High maximum sound pressure level
Integral pop filter
Delivery Includes
1 ME 62

Technical Data
Pick-up pattern  omni 
Sensitivity in free field, no load (1kHz)  31 mV/Pa +- 2,5 dB 
Nominal impedance  200 Ohm (K6) 
Min. terminating impedance  1000 Ohm (K6) 
Equivalent noise level  15 dB 
Equivalent noise level weighted as per CCIR 468-3  27 dB 
Dimensions  d 22,5 x 94 mm 
Weight  30 g 

8 Wide frequency response range
High sensitivity, Low distortion
High input withstand S.P.L.
Rugged brass case, Light weight
Shock mount adapters, stereo mounting bracket and wind screens as standard
 
PREMLIMINARY INFORMATION.
The MC10ST is a stereo microphone set including a pair of cardioid electret condenser microphones,
shock mount adapters, stereo mounting bracket and wind screens. The MC10ST can be used in a
wide range of applications, from studio and home recording to field or location sound aquisition.

Wide frequency response range
High sensitivity
Low distortion
High input withstand S.P.L.
Rugged brass case
Light weight
Shock mount adapters, stereo mounting bracket and wind screens as standard
Dedicated carry case as standard
 
SPECIFICATIONS:
Type: Back Electret Condenser Microphone
Polar Pattern: Cardioid
Frequency Response: 40Hz to 20kHz +/-10dB
Sensitivity: -40dBV/pa (10mv/pa)
Rated Impedance: 200ohm
Equivalent Noise Level: 22dB (A weighted IEC/DIN 651)
Maximum SPL: 134dB (THD

The e 945 is a fully professional super-cardioid vocal microphone which cuts through the mix and offers a smooth, natural sound. Its warm tonal response is matched with rugged construction and excellent feedback rejection. Features Rugged metal body Advanced shock-mount design Consistent on-/off-axis response Hum compensating coil Made in Germany Delivery includes a pouch and a microphone clamp Delivery Includes 1 e 945 MZQ 800 microphone clamp Pouch Technical Data Pick-up pattern  Super-cardioid Frequency response (microphone)  40.....18000Hz Sensitivity in free field, no load (1kHz) 2,0mV/Pa bei 1 kHz = -54dB (0 dB = 1V/Pa) = -74 dB (0 dB = 1V/ubar) Nominal impedance  350 Ohm Min. terminating impedance  1000 Ohm Dimensions  47 x 186 mm Weight  330 g
Weight0.23 kg0.10 kg2.00 kg0.30 kg1.12 kg0.33 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.23 kg
Weight 0.10 kg
Weight 2.00 kg
Weight 0.30 kg
Weight 1.12 kg
Weight 0.33 kg