Content | The BB-800 is built to record virtually anything anywhere with CD-quality and is able to play music or speech with many options. Thus, this unit is the ideal tool for any musician, music teacher, composer, choirmaster or school.
You can record from the four built-in mics, XLR connectors or line input directly to an SD memory card. This makes live recordings as easy as overdubs, where vocals or a solo instrument are mixed with an existing recording. Unwanted material can be removed from files with the divide function. Recordings can be made in uncompressed WAV format, or in MP3 format in one of three quality levels. The files can then be transferred to a computer by a card reader for further processing or to be burned to CD. (If you need a unit with built-in CD recorder, have a look at the Tascam BB-1000CD.)
Monitoring is possible via headphones output or the built-in loudspeakers driven by a 10 watts digital amplifier. During playback, you can choose from many useful features: Set locate markers to ease navigation within a track, use loops to repeat a marked section, change the playback tempo and/or key and make use of a metronome and a chromatic tuner. A Part Cancel feature makes practising with commercial music easier by reducing the level of vocals or solo instruments.
The unit can be operated by the included AC adapter or eight AA batteries. An infrared remote control is supplied as standard.
Main Features
* Boom box style recorder including everything needed for digital recording to SD/SDHC card
* Perfect tool to record and play everything anywhere
* Easy operation with dedicated knobs and keys
* Direct recording to SD/SDHC card
o WAV format (16 bit / 44.1 kHz)
o MP3 format (High / Mid / Low bit rate, 44.1 kHz)
* Four built-in microphones (switchable front/rear) for flexible setups including 360-degree recording – perfect for choir and band recording or minutes recording
* Two XLR mic inputs with +48V phantom power
* Automatic or manual recording level
* Switchable Auto Gain Control (high/low) or limiter
* Line input and output (RCA)
* Headphones output (mini jack)
* Two built-in 3-inch loudspeakers
* 5 W + 5 W digital amplifier (Class D Delta-Sigma modulation with 512 times oversampling by 1-bit amplifier technology)
* Special playback features for music lessons, language lessons, dancing schools, fitness centres etc.
o Loop playback
o Flash Back function to skip back by a certain amount (1–5 seconds)
o Tempo change between –50 % and +16 % without affecting the key
o Key change by ±6 semi-tones without affecting the tempo
o Part cancel feature with adjustable pan point to reduce the level of vocals or solo instruments on a given recording
o Overdub feature to mix a solo instrument or vocals with the playback sound while recording
o Marker function to locate to certain playback positions
o Metronome with LED indicator
o Chromatic tuner
* Auto-Recording feature allows recordings to be started/stopped automatically by level
* File divide function (to cut unwanted noise from recordings, for instance)
* Powered through 8 x AA alkaline batteries or AC adapter (PS-1225L, included)
* Wireless remote control supplied as standard
Specifications
General
Recording/playback media SD card (64 MB to 2 GB) or SDHC card (4 GB to 32 GB)
Recording/playback format MP3
Sampling rate 44.1 kHz
Resolution 16 bit
Bit rate (recording) Low: 64 KBit/s
Mid: 128 KBit/s
High: 192 KBit/s
Bit rate (playback) 32–320 kBit/s (fixed or variable bit rate, VBR with restrictions)
Recording/playback format WAV
Sampling rate 44.1 kHz
Resolution 16 bit
File system FAT partition: FAT16/32
Built-in microphones Front: L/R (omni-directional)
Rear: L/R (omni-directional)
Loudspeakers 2 x 3-inch (7,5 cm)
Amplifier Class D digital amplifier, 1-bit technology, Delta-Sigma modulation with 512 times oversampling
Audio inputs and outputs
Mic input (stereo) XLR-3-32, balanced
(1 = ground, 2=hot (+), 3=cold (–))
Nominal input level –13 dBu
Maximum input level +3 dBu
Minimum input level –55 dBu
Input impedance 2.4 kOhm
Line input (stereo) RCA, unbalanced
Nominal input level –10 dBV
Maximum input level +6 dBV
Minimum input level –22 dBV
Input impedance 20 kOhm
Line output (stereo) RCA, unbalanced
Nominal output level –10 dBV
Maximum output level +6 dBV
Output impedance 200 Ohm
Headphones output Stereo mini jack (3.5 mm)
Maximum output power >30 mW + 30 mW (THD+N less than 1 %, 32 Ohm load)
Audio performance
Frequency response 20 Hz – 20 kHz (±1 dB)
Distortion (THD+N) 0.05 % (1 kHz, 20-kHz LPF)
S/N ratio 88 dB(A) (1 kHz, 20-kHz LPF)
Power supply and other specifications
Power supply AC adapter
8 AA batteries (NiMH or alkaline)
AC adapter input 100–240 V AC, 50–60 Hz
AC adapter output 12 V DC
AC adapter output current 2.5 A
Battery life (alkaline, continuous operation) CD playback by loudspeakers: About 1.5 hours
SD card recording/playback by loudspeakers: About 2.5 hours
SD card recording/playback by headphones: About 4.5 hours
Power consumption 30 W (CD playback, +6 dBV line input, maximum loudspeaker output)
Operating temperature 5–35 °C
Controllable range of the remote control Head-on to the sensor: 7 m
15° left/right from the sensor: 4 m
Dimensions (W x H x D) 380 mm x 205 mm x 107 mm
Weight 3.2 kg | Un-beatable Audio Performance Comes Home to Roost - Meet the Korg MR-2000S!
Korg captured the world's attention with their MR series of DSD mobile recorders and studio tools. After consulting with top recording and mastering professionals, Korg has now created the Korg MR-2000S Studio Recorder; a 2-track mixdown designed from the ground up to bring that same DSD sonic performance home for use in any studio environment.
A DSD and Mastering Recorder Born to Run
In keeping with the MR Series studio recorder heritage of portability, the MR-2000S 1- bit recorder adds a number of new features to meet the requirements of the most demanding studio, yet retains a sleek, single rack-space profile. This compact format is also ideal for any live recording rig; or for grabbing that "off-the-board" live recording night after night - as well as shuttling your recordings from venue to studio and back again. So whether you want to capture that once-in-a-lifetime performance with impeccable detail, or need to transfer those priceless recordings from session to session, the MR-2000S high-resolution audio recorder is ready to roll.
SPECIFICATIONS:
Main Sections
Recorder section
Number of tracks: 2 tracks, 2 tracks simultaneous playback/2 tracks simultaneous recording
Recording formats
-PCM audio format: BWF (extension .wav) 44.1 kHz @ 16/24 bit, 48 kHz @ 16/24 bit, 88.2 kHz @ 24 bit, 96 kHz @ 24 bit,176.4 kHz @ 24 bit, 192 kHz @ 24 bit
-1-bit audio format: 2.8 MHz @ 1-bit, 5.6 MHz @ 1-bit,DSDIFF format (extension .dff), DSF (extension .dsf),WSD (extension .wsd)
-mp3 audio format(playback only): 44.1kHz/32kbps - 320kbps
Recording
Maximum approximately: 120 hours at 44.1 kHz/16 bit, 14.5 hours at 5.6 MHz/1- bit (for 80 Gbyte hard disk), Maximum continuous recording 6 hours
Number: Recognizes a maximum of projects four hundred projects of each format
Mark points: 100 points per project *No mark names
USB functionality: Connect to computer via USB 2.0, usable as FAT32 USB external drive
Project editing: Rename, Delete, Protect
General
Display: 160 x 104 pixel, LCD with backlight
Level meter: -54dBFS – 0dBFS (PC audio); -54dBSACD – +3dBSACD (1-Bit audio); L and R each provide 21/23-step LED + peak LED
Power supply: AC100 –240 V
Power consumption: 20 W
Dimensions/Weight: 18.9“(W) x 8.6“(D) x 1.7“(H):Including protrusions/6.17 lbs
Main Specifications
Frequency response: 10 Hz ... 20 kHz ± 1 dB@ Fs 44.1 kHz / 48 kHz, 10 Hz ... 40 kHz ± 1 dB@ Fs 88.2 kHz/96 kHz/176.4 kHz/ 192 kHz, 10 Hz ... 100 kHz (1-bit)
S/N: 103 dB (typical) @ IHF-A
THD+N: 0.005% (typical), 20 Hz ... 20 kHz
A/D conversion: 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM)
D/A conversion: 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM)
Line In L/R
XLR
-Connector: XLR-3-31 type (balanced)
-Input impedance: 22 k Ohms
-Nominal level: + 4 dBu (REC LEVEL=0dB)
-Maximum level: + 24 dBu
RCA
-Connector: RCA (Unbalanced)
-Input impedance: 50k Ohms
-Nominal level (– 12 dBFS – 12 dB-SACD):
–6 dBV (REC LEVEL = 0 dB)
-Maximum level: + 10 dBV
Line Out L/R
XLR
-Connector: XLR-3-32 type (balanced)
-Load impedance: 600 Ohms or greater
-Nominal level: – 4dBu
-Maximum level (0dBFS 0dB-SACD):
– 16 dBu (Nominal level= –12dBFS),
– 18 dBu (Nominal level= –14dBFS),
– 20 dBu (Nominal level= –16dBFS),
– 22 dBu (Nominal level= –18dBFS),
– 24 dBu (Nominal level= –20dBFS)
RCA
-Connector: RCA (Unbalanced)
-Load impedance: 47 k Ohms or greater/
-Nominal level (– 12 dBFS – 12 dB-SACD):
– 6 dBV (REC LEVEL=0dB)
-Maximum level (0 dBFS 0 dB-SACD): + 6dBV
Phones
-Connector: 1/4" stereo phone jack
-Load impedance: 16 Ohms or greater
-Maximum level: 170 mW + 170 mW @ 32 ohms
S/P Dif In/Out (coaxial)
-Connector: RCA pin
-Format: IEC60958
Word Clock In/Out
-Connector: BNC receptacle, 75 Ohms
USB
-Connector: Type B
-Format: USB 2.0 compliant,
-USB mass storage class
-Supported operating systems: Windows 2000,or later Mac OS X 10.3.9 or later
Included Items
AC power cable, Install CD (“AudioGate" audio file conversion application)
AudioGate ver,1.5 Operating Requirements
Windows
-Supported operating systems: Microsoft Windows XP Home Edition/Professional Edition Service Pack 1 or later, Microsoft Windows Vista
-Supported computers:
CPU: Intel Pentium III /1 GHz or better
RAM: 256 MB or more
A USB port that meets the operating requirements of Microsoft Windows XP/Vista
Macintosh
-Supported operating system: Mac OS X 10.3.9 or later
-Supported computers:
CPU: Apple G4/800 MHz or better, Intel Mac is supported
RAM: 256 MB or more
A USB port that meets the operating requirements of Mac OS X
Demo Project
All Most Blues
The Wind and the Wheat performed by Phil Keaggy
copyright Phil Keaggy 2006
http://www.philkeaggy.com/
*This product comes installed with the "ISC-MP3 BF532 d Korg" MP3 decoder which was developed by The Institute of Super Compression Technologies, Inc. (ISCT), Japan.
*”DSD” is a registered trademark.
*Logos, product names, and company names are their trademarks or registered trademarks.
Specifications subject to change without notice |
When inspiration hits, the last thing you need is a user interface that gets in the way. Slows you down. Turns you off. No fear of that. 25 knobs and 13 sliders get you immediate access to where the action is.
Unique to the MR16HD are 33 stellar EQ presets available to each input and 2 AUX sends for connecting to external gear. Add to this the convenience of WAV file recording, digital effects, mastering effects, analog guitar distortion and mic simulation and youʼve got just about the slickest, highest quality and downright easiest to use 16 track available on the market.
Features:
16 recording tracks to hard drive 16-bit resolution at 44.1 kHz -- no compression
4 track simultaneous recording -- great for capturing multiple instruments/vocal parts
4 XLR inputs With phantom power and trim control
Extended recording time -- more than 7.5 hours of 16-track recording at CD quality
Full 16-track bouncing Mix-down -- all tracks in stereo
FAT32 Disc Format and WAV Recording Plus USB port for easy transfer of recordings to PC
2 x AUX For connection to outboard gear
S/P DIF Digital Out For digital mastering to external CD recorder, MD etc.
Input EQ Library 33 sound shaping presets available for all inputs
Fantastic Built-In Digital FX Reverbs, guitar amp simulations etc. (see MR-8HD)
Analog Guitar Distortion Awesome distortion (see MR-8HD)
Direct CD-RW Connection via USB Master direct to USB CD-RW (no PC required)
MR16HD/CD model Features as above with in-built CD-RW
WavManager(Windows) ver 2.01 WAV Manager is a utility software application that enables you to import each audio track from a song created using the MR-8, MR-8mk2, MR-8HD, and MR16HD (hereinafter called MR-8/HD) Multitrackers into your PC as a standard mono WAV file (eight files for an 8-track song). In addtion, WAV file data created and edited on the PC can be exported to MR-8/HD.
The New Version 2.01 Now Features:
CD Writing function (now you can burn a CD from your MR-8/HD using the CD-R/RW drive in your computer
A-B part Import Function
New Song Creating Function.
WavManager (Mac OS) ver 2.0 WAV Manager for Mac is a utility software application that enables you to import each audio track from a song created by the MR-8 and MR-8HD (hereinafter called MR-8/HD) into the Mac as a standard mono WAV file (eight files for an 8-track song). Also, WAV file data created and edited in the Mac can be exported to MR-8/HD.
Optional MR16HDCD Recording Studio Pack Contents:
1 x Stoppit Microphone Pop Filter/Popper Stopper
2 x CBI American-Made Instrument Cable GA-1 (10 foot)
1 x On Stage 7701B Tripod Boom Mic Stand
1 x Audio-Technica AT2020 Side Address Studio Microphone
1 x Memorex CDR80 50-Pack Spindle (52x, 700MB)
1 x Fostex PM05MKII Powered Nearfield Monitors (Pair)
1 x CBI MLC20 Mic Cable (20 Foot)
Optional MR16HD Recording Studio Pack Contents:
1 x Hosa CPP203 Dual 1/4 in. To Dual 1.4 in. Cable (9.75 Foot)
1 x RaXXess Stoppit Microphone Pop Filter/Popper Stopper
1 x OnStage 7701B Tripod Boom Mic Stand
1 x Whirlwind MC20 XLR Microphone Cable (20 Foot)
1 x Fostex PM05MKII Powered Nearfield Monitors (Pair)
1 x Audio-Technica AT2020 Side Address Studio Microphone
1 x Memorex CDR80 50-Pack Spindle (52x, 700MB) | Uses a system of interchangeable input capsules that can be swapped out as easily as the lens of a camera
Includes detachable X/Y capsule (XYH-5) with extended signal capacity and shockmounted mics for reduced handling noise
Compatible with all Zoom input capsules
Four-track simultaneous recording
Large backlit LCD display
Records directly to SD and SDHC cards up to 32GB
Up to 24-bit/96kHz audio in BWF-compliant WAV or a variety of MP3 formats
Two mic/line inputs with XLR/TRS combo connectors, each with selectable phantom power and -20dB pad
Analog-style gain controls for each input
Protective "roll-bar" type covers prevent accidental movement of gain controls
Plug-in power (2.5 volts)
Built-in effects, including low-cut filtering, compression and limiting
Chromatic tuner and metronome
Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take
MS decoding
Multitrack to stereo internal mixdown
Normalize, Divide and Trim editing
Voice memo and up to 99 marks per recording
A/B loop playback
Variable playback speed and variable pitch without affecting playback speed
Multichannel and stereo USB audio interface for PC/Mac/iPad with loop back function
Mountable to DSLR or camcorder with optional HS-01 Hot Shoe Mount adapter
Uses two standard AA alkaline or NiMH rechargeable batteries
Over 15 hours of operation with alkaline batteries
GENERAL
Recording media:
SD card: 16MB to 2GB , SDHC card: 4GB to 32GB
Display:
Backlit LCD (128 x 64 pixels)
INPUTS
INPUTS L/R [XYH-5 X/Y mic]:
Mic type: Unidirectional
Sensitivity: -45 dB, 1 kHz at 1 Pa
Input gain: -∞ to 52 dB
Max sound pressure input: 140 dB SPL
MIC/LINE IN :
Connector: 1/8" stereo mini jack
Input gain: - ∞ to 52 dB
Input impedance: 2 k Ω or more
Plug-in power: 2.5V supported
Backup recording: -12dB lower than set L/R input gain
INPUTS 1/2:
Connectors: XLR / TRS combo jacks
(XLR: Pin 2 hot / TRS: Tip hot)
Input gain (PAD OFF): -∞ to 55.0 dB
Input gain (PAD ON): -∞ to 35.0 dB
Input impedance: 1.8 k Ω or more
Max input level: +22 dBu (PAD ON)
Phantom power: +12V /+24V /+48V
Equivalent Input Noise (EIN): -120 dBu or less
OUTPUTS
LINE OUT :
Connector: 1/8" stereo mini jack
Rated output level: -10 dBm
Output load impedance: 10k Ω or more
PHONE OUT :
Connector: 1/8" stereo mini jack
Output Level: 20 W +20 W into 32 Ω load
Built-in speaker:
400mw 8 Ω mono
RECORDING FORMATS
STEREO MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48/96 kHz
Bit rate: 16/24 (Stereo)
Maximum simultaneous recording tracks: 2
MP3
Sampling frequency: 44.1kHz
Bit rate: 48/56/64/80/96/112/32/160/192/224/256/320kbps
MULTITRACK MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48 kHz
Bit rate: 16/24 (Mono/Stereo)
Maximum simultaneous recording tracks: 6 (L/R + INPUT 1/2 + L/R backup)
USB
Mass Storage Class operation:
Class: USB 2.0 High Speed
Audio Interface operation: Multitrack mode:
Class: USB 2.0 High Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16/24 bit
Inputs / Outputs: 4 / 2
Audio Interface operation: Stereo mode:
Class: USB 2.0 Full Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16 bit
Inputs / Outputs: 2 / 2
USB bus powered operation possible
(iPad operation supported in Stereo mode only)
POWER REQUIREMENTS
AA size (LR6) battery x 2
AC adapter: AD-17 (DC5V/1A/USB-type) (optional)
USB bus power |
Connect
Multiple units can be daisy-chained over the FireWire bus, or kept in sync using the DIN connectors when recording on multiple USB devices, making iCE-16 the perfect companion for both small and large analogue consoles such as our acclaimed ZED, MixWizard and GL mixers. Plug into your desk Direct Outs or use a mix of Groups and Aux sends to save on channels.
Record
The USB DRIVE is automatically detected and checked by the system. Starting the recording is as simple as pushing a button. Remove and plug the key into a computer to access or transfer the WAV files to any DAW.
Interface
Removing the USB stick or powering up the unit without one enables the USB / FireWire interface. Signals present at the inputs will be sent to the Mac or PC on channels 1-16. WDM/ASIO drivers and USB2.0 class compliance ensure full compatibility with most DAWs, including Logic, Sonar, Cubase and Pro Tools.
Play
Fancy a ʽvirtual soundcheckʼ or just need to play cues during a live gig? Tracks can be played back directly from the USB drive and full multichannel audio can be sent from the computer to the ICE-16 analogue Outputs.
|
Features at a glance - XLR plug-on connection
- Compatible with dynamic mics as well as bettery-powered condenser mics
- 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- XLR connector also can use as external input for external input
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added, which is convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Locking mechanism assure a tight connection with the microphone body
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery by using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between multiple DR-10X units using the infrared transmission function
- Firmware can be updated using a microSD card
- RoHS-compliant product
|
Reviews
There are no reviews yet.