TASCAM TM-2X Condenser microphone for DSLR

Discontinued

103.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The directional condenser microphones equipped on the TM-2X are the same mics used in our highly-regarded DR-series recorders. The X-Y pattern and two mic capsules are ideal for capturing a true representation of the sonic atmosphere, whether it\’s sound from a wide area or directly in front of the camera. As a result, the TM-2X […]

 

Read more

The directional condenser microphones equipped on the TM-2X are the same mics used in our highly-regarded DR-series recorders. The X-Y pattern and two mic capsules are ideal for capturing a true representation of the sonic atmosphere, whether it\’s sound from a wide area or directly in front of the camera. As a result, the TM-2X records pristine sound that fits naturally with the recorded video.
Setup is as simple as connecting the cord from the TM-2X to the camera\’s mic input jack allowing you to add high-quality audio to video. The output can be set to one of two levels to enable compatibility with a variety of cameras.

TM-2X SPECIFICATIONS

Microphone type cardioid
Frequency range 50Hz to 20kHz
Input output ratings
Maximum input level 120dB SPL (at 1kHz, SENS:H, LCF=Flat, RL:2.2kΩ, Vcc:2.5V)
Output impedance 1.6k ohms (RL:2.2kΩ, Vcc:2.5V)
S/N ratio 74dB (at 1kHz, 1Pa, A weighted)
Mic sensitivity switch SENS H:-37dB, SENS L:-52dB
(at 1kHz, 0dB=1V/Pa, RL:2.2kΩ, Vcc:2.5V)
Connection cable/plug
Cable length 33cm
Plug 3.5 mm (1/8\’“) TRS stereo mini plug
(Tip: left channel, Ring: right channel, Sleeve: GND)
Power Plug-in power (JEITA standard CP-1203A)
Dimensions
TM-2X main unit 57(W)×59(H)×69(D)mm(not including cable and connectors)
Noise isolation arm 34(W)×57(H)×142(D)mm
Weight
TM-2X main unit 75g
Noise isolation arm 41g
Operating temerature -5 to 45˚C
23 to 142˚F
Accessories Fur windscreen, noise isolation arm, Owner\’s Manual, warranty
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “TASCAM TM-2X Condenser microphone for DSLR”

Your email address will not be published. Required fields are marked *

Quick Comparison

TASCAM TM-2X Condenser microphone for DSLR removeAUDIO TECHNICA AT897 SHOTGUN BROADCASTING MICROPHONE WITH BATTERY removeRODE VIDEOMIC RYCOTE DIRECTIONAL CONDESER MICROPHONE removeRODE BROADCASTER PRECISION 1 removesE ProMic Laser DSLR On-Camera Shotgun Microphone removeRODE VIDEOMIC DVCAM DIRECTIONAL CONDESER MICROPHONE remove
NameTASCAM TM-2X Condenser microphone for DSLR removeAUDIO TECHNICA AT897 SHOTGUN BROADCASTING MICROPHONE WITH BATTERY removeRODE VIDEOMIC RYCOTE DIRECTIONAL CONDESER MICROPHONE removeRODE BROADCASTER PRECISION 1 removesE ProMic Laser DSLR On-Camera Shotgun Microphone removeRODE VIDEOMIC DVCAM DIRECTIONAL CONDESER MICROPHONE remove
Image
SKUTAEM000566AT897H11RD00038H11RD00014ProMic LaserVIDEO MIC
Rating
Price 103.00 incl. GR VAT 240.00 incl. GR VAT 119.00 incl. GR VAT 439.00 incl. GR VAT 126.29 incl. GR VAT 95.78 incl. GR VAT
Stock

Out of stock

In stock

Only 1 left in stock (can be backordered)

In stock

In stock

AvailabilityOut of stockIn stockOnly 1 left in stock (can be backordered)In stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe directional condenser microphones equipped on the TM-2X are the same mics used in our highly-regarded DR-series recorders. The X-Y pattern and two mic capsules are ideal for capturing a true representation of the sonic atmosphere, whether it\'s sound from a wide area or directly in front of the camera. As a result, the TM-2X records pristine sound that fits naturally with the recorded video. Setup is as simple as connecting the cord from the TM-2X to the camera\'s mic input jack allowing you to add high-quality audio to video. The output can be set to one of two levels to enable compatibility with a variety of cameras. TM-2X SPECIFICATIONS
Microphone type cardioid
Frequency range 50Hz to 20kHz
Input output ratings
Maximum input level 120dB SPL (at 1kHz, SENS:H, LCF=Flat, RL:2.2kΩ, Vcc:2.5V)
Output impedance 1.6k ohms (RL:2.2kΩ, Vcc:2.5V)
S/N ratio 74dB (at 1kHz, 1Pa, A weighted)
Mic sensitivity switch SENS H:-37dB, SENS L:-52dB (at 1kHz, 0dB=1V/Pa, RL:2.2kΩ, Vcc:2.5V)
Connection cable/plug
Cable length 33cm
Plug 3.5 mm (1/8\'“) TRS stereo mini plug (Tip: left channel, Ring: right channel, Sleeve: GND)
Power Plug-in power (JEITA standard CP-1203A)
Dimensions
TM-2X main unit 57(W)×59(H)×69(D)mm(not including cable and connectors)
Noise isolation arm 34(W)×57(H)×142(D)mm
Weight
TM-2X main unit 75g
Noise isolation arm 41g
Operating temerature -5 to 45˚C 23 to 142˚F
Accessories Fur windscreen, noise isolation arm, Owner\'s Manual, warranty

Audio-Technica's AT897 is designed for field audio acquisition in film/TV/video production, professional recording, wildlife recording and broadcast applications. It mounts conveniently on a DV camcorder without adding noticeable heft, and remains out of the frame even with compact digital cameras. This high-performance short shotgun offers outstanding long-distance audio pickup due to narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.

Designed for video production and broadcast (ENG/EFP) audio acquisition
Short length (11“) ensures mic stays out of the shot -- even when used with compact digital cameras
Smooth, natural-sounding on-axis audio quality
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Switchable low-frequency roll-off
Operates on battery or phantom power
RoHS compliant - free from all substances specified in the EU directive on hazardous substances

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Phantom: -40 dB (10.0 mV) re 1V at 1 Pa Battery: -41 dB (8.9 mV) re 1V at 1 Pa
Impedance: Phantom: 200 ohms Battery: 300 ohms
Maximum Input Sound Level: Phantom: 129 dB SPL, 1 kHz at 1% T.H.D. Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 112 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Flat, roll-off (recessed)
Weight: 5.1 oz (145 g)
Dimensions: 10.98" (279.0 mm) long, 0.83" (21.0 mm) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; AT8134 windscreen; battery; 5/8“-27 to 3/8“-16 threaded adapter; protective carrying case

The RØDE VideoMic is a professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders. The integrated shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand. (note that cameras with proprietary sized mounts require an additional adaptor.) Its super cardioid polar pattern is highly directional, focusing on the subject in front of the camera, and minimising any surrounding sounds. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport. The RØDE VideoMic directional on-camera microphone is covered by RØDE Microphones' industry leading 10 year warranty.
Frequency response 40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
Sensitivity -38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Ιmpedance 200Ω
Τotal harmonic distortion 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Dimensions 250mm x 65mmx 102mm
Weight 176gm

Broadcaster - ?The Master of the Airwaves?

Like its name suggests this R?DE microphone was specifically designed ?ON-AIR?
applications where wide frequency response and low distortion are demanded.
Winner of the Radio World/US National Association of Broadcasters (NAB) ?What?s
Cool? award in 1998, the Broadcaster has become an industry standard when studio
sound quality is required for on air applications.
Utilizing an Australian designed and manufactured R?DE 1? externally biased condenser
transducers, the Broadcaster features a switch-able high pass filter to remove low frequency
rumble. A unique ?ON-AIR? LED indicator can be switched ?on? or ?off? by shorting contacts
on the 5 pin audio connector. This feature allows console operators to warn the ?Talent?
that the mic is live. 

SPECIFICATIONS:
Features:
True condenser transducer On-Air indicator L.E.D. Ultra low noise
Cardioid polar pattern with high 180 rejection Voice tailored Low Cut
Filter Internal Pop Filter Rugged stainless steel body
Acoustic principle: Externally polarised 25mm (1?) condenser
Directional pattern:  Cardioid
Frequency range: 20 Hz ~ 20 kHz
Output impedance:  40Ω
Signal noise ratio din iec 651:
>80 dB (1kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 114 dB (per IEC651, IEC268-15)
Power supply voltage: P48, P24 phantom
Weight without battery: 577g
Weight with battery: 1.3kg
Dimensions width: 167mm
Dimensions depth: 50mm
Dimensions height: 50mm
Maximum output voltage: +2 dBu (@ 1% THD into 1kΩ)
 

ProMic Laser is our first ever DSLR on-camera microphone - a shotgun condenser microphone with a precision-tuned capsule for capturing professional-quality audio direct to camera.

With more and more video recording enthusiasts taking an increased interest in the quality of the audio of their videos, ProMic Laser provides the high-quality audio to match the high-definition video capabilities of todayʼs DSLR cameras.

Laser, the first release in the ProMic series, is a truly professional solution. It has a rugged aluminium design and comes with a removable wind shield and a custom shockmount for hot-shoe mounting directly onto a DSLR camera.

Laser is battery-powered using a single AAA battery (not included), which means that the microphone has an increased sensitivity level, and a lower noise floor, but the inclusion of a -10dB Pad allows you to reduce the level of the mic for recording louder sources.

The microphone also features a Bass Cut, which gives you the option of removing unwanted low frequency rumble, such as traffic or noise from the camera itself, and this can be used in tandem with the -10dB Pad.

As with all sE Electronics products, ProMic Laser comes with a three-year free replacement warranty, which means if it lets you down, weʼll simply give you a new one.

ProMic Laser comes with a protective carry bag and a 3.5mm coiled jack-to-jack cable to connect the microphone to your camera. Laser is compatible with the upcoming ProMic accessories series, which includes boom poles and fur windshields.

The R?DE VideoMic is a professional grade shotgun microphone. Based on the latest ?Film industry? technology, the VideoMic is designed specifically for use with high quality Digital Video Cameras. The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it?s ABS construction. The VideoMic is powered by a standard 9 V battery and offers a Low Battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble. The VideoMic attaches to any Camcorder that has the standard camera-shoe fitting and utilizes a stereo mini jack for audio output. SPECIFICATIONS: Features: Studio recording quality. Rugged fibre-reinforced ABS construction. 9 V battery operation. Custom designed integral wind shield. Condenser Microphone. Low noise circuitry. Low handling noise. Integral camera-shoe mount. Designed & manufactured in Australia. Full 2 year guarantee. Operation power: The VideoMic is designed to operate from a 9 V battery (ANSI:1604A or IEC:6LR61). The battery is conveniently located within the support arm of the microphone. A fully removable access cover and a 1-way insertion mechanism ensure ease of loading. The battery will provide more than 100 hrs. of continuous use due to a low consumption of only 5.0 mA. Operation output impedance: The microphone will operate satisfactorily into a load impedance as low as 1 k?. If a load below this is used, the output signal level will be reduced. Acoustic principle: Line plus Gradient Directional pattern:  Super-Cardioid Frequency range: 40 Hz ~ 20 000 Hz selectable HPF @ 80 Hz/12 dB/octave Output impedance: 200 Ω Signal noise ratio din iec 651: 74 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15) Equvalent noise: 20 dB SPL (per IEC651, IEC268-15) Maximum spl: 134 dB (@ 1% THD into 1 kΩ) Sensitivity: -38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit) Dynamic range din iec 651: 114 dB (per IEC651, IEC268-15) Power supply voltage: 9 V DC Alkaline Battery (ANSI:1604A or IEC:6LR61) Current consumption:  5 mA Battery life: >100 hours Output connection: Stereo mini jack plug - ?3.5 mm. Weight: 176 grm. Dimensions width:  250mm Dimensions depth:  65mm Dimensions height:  102mm
Weight0.10 kg0.30 kg1 kg2.50 kg1.00 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.30 kg
Weight 1 kg
Weight 2.50 kg
Weight 1.00 kg
Weight 2.00 kg