Content |
For users of just about any TASCAM multitrack, the RC-30P is a wonderful timesaver. Punching in on recordings by hand means you're not ready to play right away. The RC-30P lets you play straight through. While automated punch-ins available on some recorders are also helpful, most punches can be done with the simple and efficient precision of the RC-30P, saving you time.
| Add 8 more ADAT optical inputs and outputs to your DM-3200 or DM-4800. Also works with older TASCAM gear such as the DM-24, DS-M71 and SX-1.The DP-32 is a home recording Portastudio with 32 tracks based on solid-state technology. The unit is equipped with colour LCD and channel strip controls to make recording simple so the user can stay creative. Up to eight tracks can be recorded at a time on a standard SD/SDHC memory card through its XLR and 6.3-mm combo jacks. Input processing like compression and limiting, an internal send effect with reverb, delay and chorus, guitar amp simulation and multi-effects for use with the instrument-level input as well as an external effects send are available during recording.
For mixdown, the DP-32 offers 20 channel faders and 12 rotary controls for EQ, Pan and effects including reverb and chorus. During the mastering process, the material can be further optimized with EQ, compression and normalization. Once finished, songs can be written to CD with the built-in CD-RW drive or transferred to computer over USB to publish the songs on the Internet, for example.
Main Features
32-track digital Portastudio
8 mono tracks, 12 stereo tracks (can also be used as mono tracks)
Record up to 8 tracks at once with 44.1/48 kHz and 16/24-bit audio resolution
Simultaneous playback of all 32 tracks
Virtual tracks for alternate takes and undo
Dedicated stereo master track
Colour LC display and 12-encoder channel strip for simple operation
Built-in 40-channel mixer
Mix down your 32 playback tracks with eight input signals to the dedicated stereo master track
Use the Bounce function to set tracks free by mixing multiple tracks to a single mono or stereo track
Dedicated controls for EQ, pan and effect sends
Solid-state recording to SD Card media for better shock resistance and reliability compared to hard drive recording
8 balanced microphone inputs on balanced combo XLR/jack connectors
Switchable phantom power for 4 channels each
One input switchable to instrument level for direct recording of a guitar or bass
Unbalanced stereo output (RCA jacks)
Balanced stereo monitor output (6.3-mm TRS jacks)
Two unbalanced effect sends (6.3-mm TS jacks)
Stereo headphones output (6.3-mm TRS jack)
MIDI input and output for MMC, Control Change and MTC output
Footswitch input (2.5-mm mini jack) for Tascam RC-3F (optional accessory)
Input effects (Limiter, Compressor, Noise suppressor, Exciter)
Guitar effects (Amp simulator, Reverb, Compressor, Chorus, Flanger, Phase shifter)
Mixdown effects (Reverb, Delay, Stereo chorus)
Mastering effect (Single/Multi-band stereo compressor, EQ, Noise shaping)
Mark function (up to 99 location marks)
Built-in chromatic tuner and metronome
CD-RW drive for audio CD creation as well as file import and export
USB 2.0 port for data backup/restore and file transfer with a computer
Specifications
Recording media and file systems
Recording media SD card (512 MB to 2 GB)
SDHC card (4–32 GB)
File system SD card (512 MB to 2 GB): FAT16
SDHC card (4–32 GB): FAT32
Analogue audio inputs and outputs
MIC/LINE INPUTS A–H, XLR (balanced)
Connector XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance 2.4 kOhm
Nominal input level –14 dBu
Maximum input level +2 dBu
MIC/LINE INPUTS A–H, phone jack (balanced)
Connector 6.3-mm TRS phone jack
Input impedance >22 kOhm or 1 MOhm (INPUT H, when LINE-GUITAR switch is set to GUITAR)
Nominal input level +4 dBu
Maximum input level +20 dBu
STEREO OUT L/R connectors RCA pin jack
Nominal output level –10 dBV
Maximum output level +6 dBV
Output impedance 200 Ohm
EFFECT SENDS 1/2 connectors 6.3-mm TS phone jack
Nominal output level –10 dBV
Maximum output level +6 dBV
Output impedance 200 Ohm
MONITOR OUT L/R connectors 6.3-mm TRS phone jack
Nominal output level –2 dBu
Maximum output level +14 dBu
Output impedance 200 Ohm
PHONES connector 6.3-mm TRS phone jack
Maximum output power 70 mW + 70 mW or more (THD + N 0.1% or less, 32 Ohm load)
Other inputs and outputs
MIDI input (MIDI IN) DIN 5 pin
Format Standard MIDI format
MIDI output (MIDI OUT) DIN 5 pin
Format Standard MIDI format
USB connector USB 4-pin mini-B type
Format Mass Storage Class USB 2.0 High Speed
REMOTE connector 2.5-mm TRS jack
Audio performance
Frequency response 20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Audio performance
Frequency response 20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Operating system requirements
Windows Pentium 300 MHz or faster
128 MB or more memory
Macintosh Power PC, iMac, G3, G4 266 MHz or faster
64 MB or more memory
Recommended USB port USB 2.0
Recommended USB host controller Intel chipset
Supported operating systems Windows XP, Windows Vista, Windows 7
Mac OS X 10.2 or later
Power requirements and other specifications
Power supply AC adaptor (TASCAM PS-1225L)
Power consumption 12 W (Phantom power on)
Dimensions (Width x Height x Depth, excluding projections) 514 mm x 104 mm x 340 mm
Weight 6.2 kg
Operating temperature 5–35 °C
Design and specifications subject to change without notice. |
Work faster in your Pro Tools® environment with direct access to primary transport and editing functions. This affordable Digidesign® Pro Tools Custom Keyboard uses the same symbols and color coding system built into the ICON D-Control™ worksurface and other Digidesign control surfaces while retaining all the conventional alphanumeric labels that appear on standard computer keyboards.
With functionality specific to Mac systems, the keyboard features plug-and-play USB connectivity.
Features
- Text and icons for main Pro Tools custom key commands, in addition to standard keyboard alphanumeric lettering
- Based on Apple Mac G5 Pro Keyboard
- Two USB ports and USB connection cord
System Requirements
- Digidesign-qualified Mac-based Pro Tools|HD®, Pro Tools LE™, or Pro Tools M-Powered™ system. (Note that some key commands are available only with Pro Tools HD software or with the DV Toolkit™ 2 option for Pro Tools LE.)
|
Specifications General | Recording media | | CompactFlash (CF) card | File system | | FAT32 | Recording format | | BWF (Monophonic, Polyphonic) | Number of channels | | 8 channels (44.1/48/88.2/96 kHz) 8 channels + stereo mix (44.1/48 kHz) 4 channels (176.4/192 kHz) | Quantization bit rate | | 16/24 bit | Sampling frequency | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | Reference clock | | Internal, Word In, Video In, Digital In (AES 1-8 IN, AES A-BIN, ADAT 1-8 IN) | Type of timecode frame | | 23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF | Limiter | | Attack time: 3 ms Release time: 300 ms Threshold: –5 dBFS Ratio: 32:1 | Analogue audio inputs and outputs | The error for nominal and maximum levels is ±1dB for all input and output jacks except the PHONES jack. | ANALOG INPUT (1-8) | | D-sub 25-pin | Input impedance | | 10 kOhm | Nominal input level | | When reference level is –9 dB: +6 dBu (1.55 Vrms) When reference level is not –9 dB: +4 dBu (1.23 Vrms) | Maximum input level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | ANALOG INPUT (L/A, R/B) | | XLR-3-31 (1: GND, 2: HOT, 3: COLD) | Input impedance | | 10 kOhm | Nominal input level | | When reference level is –9 dB: +6 dBu (1.55 Vrms) When reference level is not –9 dB: +4 dBu (1.23 Vrms) | Maximum input level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | ANALOG OUTPUT (1-8) | | D-sub, 25-pin | Output impedance | | 100 Ohm | Nominal output level | | When reference level is –9 dB: +6 dBu (1.55 Vrms) When reference level is not –9 dB: +4 dBu (1.23 Vrms) | Maximum output level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | ANALOG OUTPUT (A/B) | | XLR-3-32 (1: GND, 2: HOT, 3: COLD) | Output impedance | | 100 Ohm | Nominal output level | | When reference level is –9 dB: +6 dBu (1.55 Vrms) When reference level is not –9 dB: +4 dBu (1.23 Vrms) | Maximum output level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | PHONES connector | | 6.3-mm standard stereo jack | Maximum output power | | 45 mW + 45 mW or more (THD+N 0.1 % or less, into 32 Ohm) | Digital audio inputs and outputs | DIGITAL IN/OUT (AES/EBU) | | D-sub, 25-pin | Minimum input voltage | | 2 Vpp | Maximum input voltage | | 7 Vpp | Output voltage | | 2–5 Vpp | Format | | AES3-2003/IEC 60958-4 (AES/EBU) | DIGITAL I/O (ADAT) | | ADAT optical | Format | | ADAT | DIGITAL INPUT A-B | | XLR-3-31 | Input voltage | | 2–7 Vpp at 110 Ohm | Format | | AES3-2003 (AES/EBU) | DIGITAL OUTPUT L-R | | XLR-3-32 | Output voltage | | 2–5 Vpp at 110 Ohm | Format | | AES3-2003 (AES/EBU) | Other inputs and outputs | RS-422 | | D-sub, 9-pin | RS-232C | | D-sub, 9-pin | PARALLEL | | D-sub, 25-pin | CASCADE IN | | BNC | Input voltage | | TTL equivalent (5 V) | Input impedance | | 75 Ohm ±10 % Allowable frequency deviation of external synchronization: ± 100 ppm | CASCADE OUT | | BNC | Output voltage | | TTL equivalent (5 V) | Output impedance | | 75 Ohm ±10 % | Sampling frequency | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | TIME CODE IN | | BNC | Input voltage | | 0.5–5 Vpp | Input impedance | | 20 kOhm | TIME CODE OUT | | BNC | Output voltage | | 2–5 Vpp | Output impedance | | 600 Ohm ±10 | WORD/VIDEO IN | | BNC | Input voltage | | TTL equivalent (5 V) | Input impedance | | 75 Ohm ±10 % Allowable frequency deviation of external synchronization: ± 100 ppm | WORD/VIDEO THRU/OUT | | BNC OUT/THRU switch included (OUT is for WORD OUT only) | Output voltage | | TTL equivalent (5 V) | Output impedance | | 75 Ohm ±10 % | Sampling frequency (when using WORD) | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | ETHERNET | | RJ45 | Keyboard | | Mini-DIN (PS/2) | USB | | USB A-type, 4-pin | Protocol | | USB2.0 HIGH SPEED (480 Mbit/s) | Audio performance (analogue input to analogue outp | Frequency response | | | 20 Hz - 20 kHz | | ±0,5 dB (all sampling rates) | at 40 kHz | | +0,5 dB/–2 dB (Fs = 88.2/96 kHz) | at 80 kHz | | +0,5 dB/–5 dB (Fs = 176.4/192 kHz) | Distortion | | ≤0.005% (Reference level: –20 dB, input level: +23 dBu, 1 kHz, AES-17LPF) | S/N ratio | | ≥100 dB(A) (22 kHz LPF) | Power requirements and other specifications | Power requirements | | 100–240 V AC, 50–60 Hz | Power consumption | | 26 W | Dimensions (W x H x D) | | 483 mm x 88 mm x 288 mm | Weight | | 4.8 kg | Operating temperature range | | 5–35 °C |
|
Liquid Mix HDLiquid Mix HD | TDM Plugin for Pro Tools HD
Key Features
Variety of Classic Emulations
40 compressors and 20 EQs, sampled from vintage originals with a free expanding library online.
Dynamic Convolution Technology
The unique patented Dynamic Convolution process delivers unparalleled EQ and Compression emulations.
Ultra-Low Latency for Recording
With the ultra-low latency of Liquid Mix HD (just 12 samples), it can now be used for recording and live sound applications
Optimised for Pro Tools HD
Over one hundred simultaneous mono instances can be run at 44.1/48kHz on an HD3 system.
Full Control Surface Mapping
Pro Tools TDM format ensures full control mapping on all major Pro Tools control surfaces, including ICON and VENUE.
Unique Hybrid Super EQ
Create your own totally unique 7-band super EQ, built out of separate classic EQ bands.
Compressor 'Free' Mode
Vintage compressors with limited controls can now be set to provide fully variable Attack, Release and Ratio.
Automation and Full Recall
Perfect integration with Pro Tools HD allows for automation of parameters and full recall within your session.
| Tuner + Metronome + Recorder - All in One Unit!
The TMR-50 - Your Ideal Practice Partner
Highlights:
- Tuner, metronome, and recorder can be used simultaneously or independently.
- Internal mic and speaker make it easy to record and play back your performance
- Loop Play function lets you repeat a desired region of a recorded track
- High-quality linear PCM recording/playback
- Record up to 100 tracks (approximately total 20 minutes)
- USB port lets you transfer recorded data and song files between the TMR-50 and your computer
- Newly designed highly responsive LCD needle-type meter
- Wide detection range from C1 to C8
- The Sound Out function produces a reference tone in a three-octave range from the built-in speaker
- The Sound Back function generates the reference tone that's closest to the input sound, while the meter indicates the pitch discrepancy between the reference and the input sound - a great function for ear training!
- Calibration supports a range of concert pitches
- Marks indicate pure major and minor third intervals
- Wide tempo range of 30--252 beats per minute
- 15 rhythm variations let you practice with a broad range of musical styles
- Easy tempo settings with two types of tempo step patterns plus a tap tempo function
- Large LCD with backlight brightness that's adjustable over two levels for enhanced visibility
- Your choice of body color: black or pearl white
- Convenient key layout, and newly designed stand and battery cover
- Memory Backup and Auto Power Off
Korg's popular TM series of tuner/metronome units is loved by players who practice to perfect their musical skills. Now joining the lineup is the TMR-50, which adds recorder functionality to the already impressive list of features. An extremely valuable way to improve your playing ability is to identify the problem areas that need work, and then practice to improve those areas. With its built-in mic and speaker, the TMR-50 makes it easy to practice this way. It provides high-quality linear PCM recording and a USB port for convenient usage with your computer. The TMR-50 features equally robust capabilities for its tuner and metronome functionality that will help you improve your sense of pitch and rhythm. Two choices of color are available: black and pearl white. Whether you're in a brass band or an orchestra, the TMR-50 is the ideal partner for anyone who wants to improve their playing.
Specifications
Recording format:
PCM audio format, WAV format (extension: .wav) 44.1 kHz@16-bit
Available recording time:
Maximum approx. 20 minutes (Internal Memory size is 120 MB)
Total number of tracks:
Up to 100 tracks
Tuning:
12 note equal temperament
Detection range:
C1 (32.70 Hz) ~ C8 (4186 Hz), Using Sine Wave.
Reference tone:
C3 (130.81 Hz) ~ C6 (1046.50Hz), 3 Octave.
Tuning Mode:
Meter Mode (AUTO), Sound Out Mode (MANUAL), Sound Back Mode (AUTO)
Calibration range:
A4 = 410 ~ 480 Hz (1 Hz steps)
Detection accuracy:
+/- 1 cent
Sound precision:
+/-1 cent
Tempo range:
Quarter Note = 30 to 252 BPM
Tempo setting:
3 Types: Pendulum Step
Full Step
Tap Tempo
Beat range:
Total 10 beats: "0 to 9" as "Quarter-note" Rhythm
Rhythm pattern:
Duplets, triplets, triplets without the center beat, quadruplets, and quadruplets without the center beats
Tempo accuracy:
±0.3%
Terminals:
Input (f6.3mm, Mono-Standard Jack type)
Headphones (f3.5mm, Stereo-mini Jack type)
USB (mini-Type B)
Internal Speaker:
Dynamic Speaker (f28 mm)
Power (Battery):
AAA battery (3.0 V) x 2
Manganese batteries or alkaline batteries, Ni-MH: Nickel metal hydride
Battery Life:
Recorder ... Approximately 16/13/11 hours
(Backlight: off/soft/auto, using alkaline batteries. Maximum of 20 minutes per
recording.)
Tuner ... Approximately 24/22/20 hours
(Backlight: off/soft/auto, A4 continuous input, using alkaline batteries)
Metronome ... Approximately 18/16/14 hours
(Backlight: off/soft/auto, tempo 120, 4 beats, maximum volume, using alkaline batteries)
Dimensions (W x D x H):
111 x 82 x 18 mm / 4/37 x 3.23 x 0.71 inches
Weight:
119 g / 4.19 oz (Including battery)
Included items:
AAA battery (3.0 V) x 2 for verifying proper operation
USB Cable
Options:
Contact Mic = CM-100L
Computer Requirements
Windows:
A computer that satisfies the operating requirements of Microsoft Windows XP/Windows Vista/Windows 7 and is equipped with a USB port
Macintosh:
Mac OS X 10.5 or later |
Reviews
There are no reviews yet.