TASCAM iM2X DIGITAL RECORDER

The Tascam iM2X turns an Apple iPhone 4, iPad or iPod Touch 4G into a powerful PCM audio recorder for CD-quality recordings. It consists of a pair of condenser microphones and a high-quality preamp and plugs into the dock connector of the iOS device. The microphone elements are XY oriented for clear stereo definition and minimal phase differences. Moreover, they are adjustable over 180 degrees for the best sound placement.

Unlike mics that use the iOS deviceʼs built-in preamp, the iM2X with its internal A/D converter ensures low noise and better linearity in frequency response. The microphone elements also used in Tascam DR series recorders can handle sound pressure levels up to 125 dB to capture the loudest concerts and instruments without distortion. Thanks to an input level control and a two-colour level meter, level adjustment is very simple. A switchable limiter also contributes to this by reducing sudden peaks and protecting against unforeseen overload.

The iM2X powered through the dock connector, so no battery is required. A USB input is provided to charge the iOS device for long recordings, either through a computer or a USB charger.

An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from AppStore at no charge.

Main Features

Turns your Apple iPhone 4, iPad or iPod Touch 4G into a high-grade PCM audio recorder
Stereo condenser microphone in XY orientation for clear stereo definition and minimal phase differences
Accepts sound pressure level up to 125 dB SPL
Microphone can be swivelled by 180 degrees to capture sound sources in front or behind the unit
Allows recordings in CD quality (44.1kHz/16-bit)
Input level rotary control
Input level indicator (green/red)
Switchable limiter to avoid distorted recordings
Power supply via dock connector, no battery required
USB connector available for recharging the iOS device
Easy setup (attaches to the deviceʼs dock connector)
Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge
Specifications

General
Microphone type        Cardioid condenser (stereo)
Maximum input level        125 dB SPL
Input level adjustment range        0–40 dB
Frequency range        10 Hz – 20 kHz
Sampling frequency        44.1 kHz
Bit rate        16 bit
iOS device recharging port        USB Mini-B connector
iOS device connector        30-pin dock connector
Device support        iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad or iPod touch (4th generation)
Power supply and other specifications
Power supply        Provided through the iOS device connector
Power consumption        90 mW
Dimensions (W x H x D)        56 mm x 57 mm x 22 mm (including connector)
Weight        30 g
Operating temperature range        5–35 °C
Design and specifications subject to change without notice.

Connect

Multiple units can be daisy-chained over the FireWire bus, or kept in sync using the DIN connectors when recording on multiple USB devices, making iCE-16 the perfect companion for both small and large analogue consoles such as our acclaimed ZED, MixWizard and GL mixers. Plug into your desk Direct Outs or use a mix of Groups and Aux sends to save on channels.

Record

The USB DRIVE is automatically detected and checked by the system. Starting the recording is as simple as pushing a button. Remove and plug the key into a computer to access or transfer the WAV files to any DAW.

Interface

Removing the USB stick or powering up the unit without one enables the USB / FireWire interface. Signals present at the inputs will be sent to the Mac or PC on channels 1-16. WDM/ASIO drivers and USB2.0 class compliance ensure full compatibility with most DAWs, including Logic, Sonar, Cubase and Pro Tools.
Play

Fancy a ʽvirtual soundcheckʼ or just need to play cues during a live gig? Tracks can be played back directly from the USB drive and full multichannel audio can be sent from the computer to the ICE-16 analogue Outputs.

• Record to SD/SDHC card (Up to 32GB)
• Simultaneously record up to 4 tracks
• Record Mode：MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
• Recording format：44.1/48/96kHz 16/24bit (WAV/BWF)
• TASCAM original HDDA microphone preamps
• Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
• Two XLR/TRS inputs support +4dBu line level input and phantom power (24 or 48VDC on XLRF)
• Plug-in power and high-output mic input supported on inputs 3-4
• CAMERA OUT connector for output from the DR-60D's mixer (adjustable gain)
• CAMERA IN connector for sound monitoring from the camera
• Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
• 50mW/ch headphone output
• Tripod mounting socket (bottom) and DSLR mounting screw attachment (top)
• Handles protect the screen and can be used to attach a shoulder strap
• Soft-Touch Rubber Keys for silent operation
• HOLD switch to prevent accidental operation
• QUICK button feature for easy access to various functions
• 128x64 pixel LCD with backlight
• USB 2.0 connection for high-speed transferring of files
• Mini USB cable included
• Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
• Can extend battery life with BP-6AA battery pack (sold separately)
• Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
• Internal mixer: PAN and LEVEL controls
• Low cut filter(40/80/120Hz)
• Limiter (1/L and 2/R can be selected for link-operation)
• Delay function for microphone distance adjustment (up to 150ms)
• M-S decode function
• Slate tone generator (AUTO/MANUAL)
• Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
• Selectable slate tone generation. 3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated
• File name format can be set to use a user-defined word or date
• Dual-recording function allows two files to be recorded simultaneously at different levels
• Auto-record function can automatically start and stop recording at set level
• Pre-recording function allows the unit to record a 2 second sound buffer before recording is activated
• Self-timer function for solo recording
• New file starts recording automatically without interruption when maximum file size is reached
• Track incrementing function allows a recording to be split by creating a new file when desired
• Jump back and play function
• Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
• Resume function to memorize the playback position before the unit is turned off
• MARK function up to 99 points per audio track
• DIVIDE function

• The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
• The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
• If recorded in mono in WAV files, the maximum recording time will be double the figures above.
• For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.

• 2-channel field recorder in Stereo or Mono on Compact Flash or Micro drive cards
• Light weight with rigid chassis
• FAT32 file system & BWF Stereo file format + MP3 recording/playback
• Built-in Stereo microphone for quick memo recording
• 2 x XLR mic inputs with phantom power to accept professional microphones
• High resolution recording at 24bit 96kHz
• Mic Trim for accurate recording level adjustment
• Automatic Level Control (ALC - OFF/ALC/LIMITER)
• Hi-Pass Filter
• Backlit 132 x 64 dot matrix LCD display
• Two-hour capacity on 4GB CF card with Stereo 24 Bit/96 kHz resolution  
• Pre-record buffer (2 secs) ensures full-take recording with no inadvertent loss
• Auto File Closing (the recording file auto-closes every minute to secure recorded data)
• Auto Shut-off function when the input power becomes abnormally low to save data
• Convenient file naming mode: DATE or TAKE
• 4 hours operation on 4 x AA Alkaline / Ni-MH batteries
• 8 hours operation possible with optional rechargeable NiMH battery pack
• Wired remote controller with microphone attachment belt
• USB 2.0 data transfer to Mac or PC computers for further editing and post-production
• Comes with 128MB CF card, AC adapter, dedicated shoulder belt and carrying pouch

The FR-2LE is a compact field memory recorder for professional use offering 24bit 96kHz recording in the industry standard BWF file format. It has a good pedigree given Fostex's previous success with their DAT portables (PD2 & PD4) and latterly with their solid state FR-2 and its optional full timecode facility.

Now with their latest FR-2LE, they have an even more compact offering for high quality field recording, interview recording (MP3 mode also available), or simple film/broadcast audio recording.

The FR-2LE is equipped with two professional phantom powered XLR microphone inputs (XLR-Jack combo) complete with precise control over the recording level. It features a 1 take = 1 file recording system which eliminates overwrites and its 2 second ʽpre-recordʼ buffer means there should never be a missed take or lost soundbite. Thereʼs also an MP3 mode and built-in stereo microphone.

Feature rich, elegant in operation, good pedigree - the new FR-2LE looks assured of success.

MAIN FEATURES

• Long Battery Life

The FR-2LE can run for up to 4 hours on 4 x AA Alkaline batteries and up to 8 hours with the optional NiMH BATPACK battery pack. A choice of two BATPACK chargers are also available - one for the mains and one that also charges your pack from a 12V car outlet.

• Extended recording times

Over 6 hours @ 16bit 44.1kHz recording on an 4Gb CompactFlash card.

• Professional inputs

Dual XLR inputs (XLR-Jack combo) with top quality microphone pre-amps, trim control and phantom power. Analogue out is provided on phono (RCA) connectors.

• BWF or MP3 recording

Record up to 24bit 96kHz audio.

• Tough construction

Manufactured from high-grade materials and specifically designed for professional location recording.

• Fail Safe Recording

In addition to a 1 take = 1 file system to eliminate overwrites, the FR-2LE also features Auto File Closing which closes files at one minute intervals, thus preserving the data in the event of a power failure.

• USB 2.0

The USB 2.0 port allows direct connection to PC and MAC for easy file transfer.

• Eight mono tracks
• CD-quality recording (16bit/44.1kHz)
• Two tracks simultaneous recording/ eight tracks simultaneous playback
• Dedicated stereo master track available
• Record to SD/SDHC card (Up to 32GB)
• 2 Built-in omni-directional condenser microphones
• Microphone sensitivity can be selected from 2-positions (Low/High)
• Two TS 1/4" or XLR mic/line inputs
• INPUT A can connect high-impedance instrument directly (Like an electric-guitar)
• Phantom power supply
• Independent LEVEL/PAN/Reverb SEND knobs for each track
• Two RCA unbalanced line inputs
• 20mW/ch headphone output
• Footswitch ready with polarity switching (Notice: can't use RC-3F)
• 128x64 dot-matrix LCD with backlight
• Four AA batteries operation up to 6.5 hours (When recording, using the eneloop battery)
• Insert effects for input channels (2-band shelving EQ, compressor, exciter, de-esser)
• Mastering effects (2-band shelving EQ, multi-band compressor, normalize)
• Auto analysis mastering function
• 2-band shelving EQ for each track
• Reverb effects (Hall1/2,Room,Studio,Plate1/2)
• Optional AC adapter ready (TASCAM PS-P520)
• Can connect an external battery pack (TASCAM BP-6AA)
• Direct locate function by jog-wheel
• Repeat playback between IN/OUT point
• Track edit functions（COPY PASTE, COPY INSERT, MOVE PASTE, MOVE INSERT, OPEN, CUT, SILENCE, CLONE TRACK, CLEAN OUT)
• Bounce function allows recording of more six tracks
• UNDO/REDO(UNDO HISTORY) function
• Chromatic tuner and metronome included
• High-speed data transfer by USB2.0 connection
• Backup and restore songs
• File import/export by Wav format (mono/stereo)
• Export stereo master file as stereo wav format
• 2GB SD card included