Content | The MZ-223 allows multiple audio sources to be mixed, segregated, and routed to 3 independent zones or destinations using familiar volume sliders and assignment buttons. Input signals can be inserted via 5 audio channels, each consisting of 2 sets of unbalanced RCA stereo pairs. A total of 10 sets of RCA inputs are provided. Channels 1 and 2 can be set to accommodate phono-level signals for use with a turntable. In addition located conveniently on the front panel, 2 mic-compatible
The independent 3-zone outputs each have a combination of balanced professional XLR or RCA unbalanced configurations for long runs or connection to common residential power amplifiers or speakers. This flexibility, for example, allows music to be routed to ZONE1, ambient noise or natural sounds to ZONE2, a separate music track or a voice announcement can be routed to ZONE3, while the convenient "Talkover” function will automatically lower any mixed channel source so the microphone can be heard while speaking.
- Easy operation and routing via familiar volume sliders, toggle switches/buttons, and knobs
- 3 Independent Zone outputs with stereo XLR balanced and unbalanced RCA connectors per channel
- 5 separate input channels, each with two sets of stereo RCA inputs
- 2 additional mic-compatible XLR inputs on the front panel
- All audio can be mixed or segregated per channel, and routed to the 3 separate Zones/Outputs
- “Talkover” function automatically lowers other source content while microphones are in use
- Independent 3-band EQ per output channel and per microphone input
- Compact 2U rack mount design
| • Gain settings at backside
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 2 Mic, 11 Line inputs
The IMIX-7.3 is a compact installation mixer with zone control. It has exact the same functionality as the IMIX-7.1 but each input on the IMIX-7.3 can be routed to the desired output. This function makes it possible to control 3 areas with different music, sound level and EQ settings.
Specifications Input channels: 2 x Microphone, combo XLR/Jack
11 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master Balanced, XLR
1 x REC output, RCA
1 x Headphones, 6.3mm Jack
Master EQ: 80Hz, 1KHz, 12KHz, -12dB / +12dB
Mic EQ: 80Hz, 1KHz, 12KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: | • Master outputs with 3 way tone control
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 1 Mic, 7 Line, 2 Phono inputs
The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device.
Specifications Input channels: 1 x Microphone, combo XLR/Jack
7 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master (Balanced), XLR/RCA
1 x Headphones, 6.3mm Jack
Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: |
LD Systems ZONE 622 2-Zone Mixer
The ZONE 622 is a particularly compact 1U zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The device has all the essential functions, an input for an external emergency announcement system with its own volume control, and a connection to the remote-controlled switching mute. The ZONE 622 is suitable as a sound system for separate zones in restaurants, clubs, hotels, fitness centres, and for presentations.
The two balanced microphone channels with stereo jack inputs are equipped with controls for Gain, Talkover volume, Talkover attenuation, 12V phantom power and a shared 2-band EQ. The line channels 1 and 2 can also be used to connect unbalanced microphones, and channel 6 is specially designed for balanced FOH signals. The stereo input channels of the ZONE 622 have a Cue button and volume control signal display, and the channels 1-5 have an additional gain trimmer. Furthermore, the zone mixer has a 3.5 mm mini jack input and a USB port , that is used as a Stereo Input and Output (Recording Out). So you can use the ZONE 622 as an external audio interface.
The stereo and mono output sections have their own meters, 2-band EQ, trimmer for adjusting the maximum output level, as well as electronically balanced jack plugs and terminal block connectors. In addition, the stereo section has unbalanced RCA jacks. An adjustable headphone jack for previewing and a recording output complete the equipment for the ZONE 622.
Product type
Mixers
Type
Installations
Number of Zones
2 (Master, Zone)
Type
stereo
Installation Height
1 U
Total Input Channels
8 (2x Mic, 2x Mic/Line, 3x Line, 1x FOH)
Frequency response
20 - 40000 Hz
Microphone channels
2 (with phantom power 12 V)
Microphone Channel Connections
6.3 mm stereo jack (balanced)
Microphone channel controls
1 x EQ Hi , 1 x EQ Low , 1 x Talk Over Damp , 1 x Talk Over Level , Gain , On / Off
Microphone Channels Display Elements
On-LED
Microphone Channels Input Impedance
4 kOhm
Microphone Channels Input Sensitivity
6.1 mV
Microphone Channels THD
0.08%
Line / Microphone Channels
2
Line / microphone input connectors
2 x RCA , 3.5 mm stereo jack (input 1) , 6.3 mm stereo jack (balanced)
Line / microphone channel controls
Cue , level , mic/lline , Trim
Line / Microphone Display Elements
Cue-LED , Signa-LED
Line Channels
3
Line input connectors
Input 3-4: 2 x RCA , Input 5: 2 x RCA + USB
Line Channel Controls
Cue , level , Trim
Line Channel Display Elements
Cue-LED , Signa-LED
Line Channel Input Impedance
4 kOhm
Line Channels Input Sensitivity
1.5 V
Line Channels THD
0.03%
input sensitivity AUX/Line
3 V
FOH Channels
1
FOH Input Connections
6.3 mm stereo jack (2 x balanced)
FOH Input Controls
Cue , level
FOH Input Display Elements
Cue-LED , Signa-LED
Line outputs
3 (Master - Stereo, Zone - Mono, Rec - Stereo)
Output Connectors Master
6.3 mm stereo jack (2 x balanced) , RCA (x2) , terminal block
Master Controls
EQ Hi , EQ Low , level , Max. Level
Master Display Elements
5-Segment Level Meter
Master Output Levels
(balanced) 24 dBu , (unbalanced) 18 dBu
Zone Output Connections
6.3 mm stereo jack (balanced) , terminal block
Zone Controls
EQ Hi , EQ Low , level , Max. Level , Source Input 1-5/Mix
Zone Display Elements
5-Segment Level Meter
Zone Output Levels
24 (balanced/ unbalanced) dBu
Output Connections Rec
2 x RCA
Headphones ouput
1
Headphone Out Port
6.3 mm TRS
Headphone Output Controls
Cue Volume
Headphone Output Voltage
(@ 32 Ohm) 1.25 V
Additional Inputs
2 (Emergency Input, Output Mute)
Connections Additional Inputs
terminal block
Additional Input Controls
Level Emergency Input
Additional Controls
power switch
Additional Display Elements
Power-LED
Operating voltage
220 - 250 V AC, 50 Hz
Mains connector
IEC power connector
Power consumption
18 W
Fuse
T 500 mAL / 250 V
Width
485 mm
Height
44 mm
Depth
179 mm
Weight
2,4 kg
Accessories (included)
Power cord , terminal blocks
| With the MA200 mixing amplifier series, the APart engineering team has created some unique, original and above all, complete electronics. Never before has a mixer amplifier had all the features to meet a contractors demand for nearly every application.
- The most important features:
- 200 watt 100 Volt mixing amplifier
- 4 mic inputs (phantom via internal switch)
- Mic inputs have integrated speech filters and are high-class transistor balanced
- 4 Line inputs
- 4 Loudspeaker output zones can be selected (switch on/off) and have LED indication. Zone 4: selection of "Music only”, "microphone only” or both music and microphone.
- Bass-treble tone control
- Master volume control
- 3-Level priority system:
- 1. Emergency input: directly to the power amplifier (vol adjustable)
- 2. VOX Mute: Voice activated mute (adjustable) on MIC input 1 mutes all other inputs
- 3. Contact closure mutes all line inputs
- LED indication on front pannel when line inputs are muted
- 24V ouput power is activated via contact closure. Can be used to switch the 24V priority
- relays of volume controls.
- Integrated 2-tone chime has an adjustable volume and is activated by contact closure
- Build-in dynamic limiter (-3dB)
- Record output via RCA
- PRE AMP OUT - AMP IN makes it possible to insert an external signal processor or to add
| LDMS828 - 19" Line Mixer 8 in 2 and Splitter 2 in 8
The LD Systems LDMS828 is a mixer, splitter, and booster amplifier in 19” rack format for flexible live and studio applications.
The LDMS828 has one stereo and six mono channels with individual LED level metres; all inputs and outputs are electronically balanced. Two mono channels are equipped with stereo TRS sockets, the other connectors are XLR sockets. The stereo channel has individual volume controls for input and output and a link button for looping through the signal; each mono channel has volume and panorama controls as well as a button that toggles between the splitter and mixer functions.
TheLDMS828 by LD Systems is impressive not only because of its practical features, but also because of its technical specifications. The broad frequency response of 5 - 40,000 Hz, a dynamic range of 85 dB, and the extremely low total harmonic distortion of 0.0008% guarantee maximum signal fidelity. The nominal working level of -10 dBV to +4 dBU makes the mixer/splitter suitable for connection to both professional and consumer equipment.
Mono input channels, line
6
Mono line input connectors
2 x 6.3 mm TS
Mono line input type
Electronically balanced
Stereo Line Input Channels
1
Stereo Line Input Connectors
2 x XLR
Stereo Line Input Type
Electronically balanced
Input impedance
(balanced) 50000 Ohm(s), (unbalanced) 25000 Ohm(s)
Max. input level
+ 21 dBu
Nominal working level
-10 dBV - +4 dBu
Mono output connectors
2 x 6.3 mm TS
Mono output type
Electronically balanced
Stereo output connectors
1 x XLR
Stereo output type
Electronically balanced
Output impedance
(balanced) 60 Ohm(s), (unbalanced) 30 Ohm(s)
Max. output level
+22 dBu
Frequency response
5 - 40000 Hz
Controls
Level Channel 1-6, Main Input Level, Main Link, Main Output Level, Power, Splitter/Mixer Channel 1-6
Indicators
In/Out Level Channel 1-6 (6 -segment), Input Level LED Indicator (6-segment), Output Level Indicator (6-segment), Power
Operating voltage
220 V AC - 240 V AC, 50-60 Hz
Mains connector
IEC power connector
Accessories (included)
Power cord
|
Reviews
There are no reviews yet.