Content | The MZ-223 allows multiple audio sources to be mixed, segregated, and routed to 3 independent zones or destinations using familiar volume sliders and assignment buttons. Input signals can be inserted via 5 audio channels, each consisting of 2 sets of unbalanced RCA stereo pairs. A total of 10 sets of RCA inputs are provided. Channels 1 and 2 can be set to accommodate phono-level signals for use with a turntable. In addition located conveniently on the front panel, 2 mic-compatible
The independent 3-zone outputs each have a combination of balanced professional XLR or RCA unbalanced configurations for long runs or connection to common residential power amplifiers or speakers. This flexibility, for example, allows music to be routed to ZONE1, ambient noise or natural sounds to ZONE2, a separate music track or a voice announcement can be routed to ZONE3, while the convenient "Talkover” function will automatically lower any mixed channel source so the microphone can be heard while speaking.
- Easy operation and routing via familiar volume sliders, toggle switches/buttons, and knobs
- 3 Independent Zone outputs with stereo XLR balanced and unbalanced RCA connectors per channel
- 5 separate input channels, each with two sets of stereo RCA inputs
- 2 additional mic-compatible XLR inputs on the front panel
- All audio can be mixed or segregated per channel, and routed to the 3 separate Zones/Outputs
- “Talkover” function automatically lowers other source content while microphones are in use
- Independent 3-band EQ per output channel and per microphone input
- Compact 2U rack mount design
|
The JBL Commercial CSM-21 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-21 features two stereo music inputs with gain control and clip LEDs, and one stereo output with an active crossover and a dedicated subwoofer output. |
Power Output Level R-300 PLUS
STEREO
8ohm(T.H.D 0.05%) 170W+170W
4ohm(T.H.D 0.05%) 250W+250W
BRIDGED MONO
8ohm(T.H.D 0.05%) 460W
8ohm(T.H.D 0.5%) 500W
Frequency Response 20Hz- 20kHz, ±0.5dB
Convection Cooled
SoftStart Protection System
Balanced 10kΩ@0.775V Inputs
| LDMS828 - 19" Line Mixer 8 in 2 and Splitter 2 in 8
The LD Systems LDMS828 is a mixer, splitter, and booster amplifier in 19” rack format for flexible live and studio applications.
The LDMS828 has one stereo and six mono channels with individual LED level metres; all inputs and outputs are electronically balanced. Two mono channels are equipped with stereo TRS sockets, the other connectors are XLR sockets. The stereo channel has individual volume controls for input and output and a link button for looping through the signal; each mono channel has volume and panorama controls as well as a button that toggles between the splitter and mixer functions.
TheLDMS828 by LD Systems is impressive not only because of its practical features, but also because of its technical specifications. The broad frequency response of 5 - 40,000 Hz, a dynamic range of 85 dB, and the extremely low total harmonic distortion of 0.0008% guarantee maximum signal fidelity. The nominal working level of -10 dBV to +4 dBU makes the mixer/splitter suitable for connection to both professional and consumer equipment.
Mono input channels, line
6
Mono line input connectors
2 x 6.3 mm TS
Mono line input type
Electronically balanced
Stereo Line Input Channels
1
Stereo Line Input Connectors
2 x XLR
Stereo Line Input Type
Electronically balanced
Input impedance
(balanced) 50000 Ohm(s), (unbalanced) 25000 Ohm(s)
Max. input level
+ 21 dBu
Nominal working level
-10 dBV - +4 dBu
Mono output connectors
2 x 6.3 mm TS
Mono output type
Electronically balanced
Stereo output connectors
1 x XLR
Stereo output type
Electronically balanced
Output impedance
(balanced) 60 Ohm(s), (unbalanced) 30 Ohm(s)
Max. output level
+22 dBu
Frequency response
5 - 40000 Hz
Controls
Level Channel 1-6, Main Input Level, Main Link, Main Output Level, Power, Splitter/Mixer Channel 1-6
Indicators
In/Out Level Channel 1-6 (6 -segment), Input Level LED Indicator (6-segment), Output Level Indicator (6-segment), Power
Operating voltage
220 V AC - 240 V AC, 50-60 Hz
Mains connector
IEC power connector
Accessories (included)
Power cord
| • Master outputs with 3 way tone control
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 1 Mic, 7 Line, 2 Phono inputs
The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device.
Specifications Input channels: 1 x Microphone, combo XLR/Jack
7 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master (Balanced), XLR/RCA
1 x Headphones, 6.3mm Jack
Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: |
- 3 zones with routing facility of all input channels as desired
- 5 input channels with recessed gain controls on the rear panel, signal LED and super smooth dual-rail channel faders
- 2 microphone channels with level control, LED level meter, 3-way equalizer and talkover button
- Talkover level and response time adjustable
- Pre-fader listening (CUE) to the stereo input channels via adjustable headphone output
- Color illuminated rotary controls and rubber buttons
- Zone outputs with level control, 3-way equalizer and 10-digit stereo LED level meter
- 2 record outputs (independent of the master channels) with routing facility of all zone outputs as desired
- Inputs: 8 x line (stereo RCA), 2x line/phono (stereo RCA), switchable; 2 x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: 3 x master (optionally 3-pin XLR or stereo RCA) and 2 x record (stereo RCA)
- Operation via supplied power unit
- Rack installation, 2 U
- Ideal for restaurants, bars, theme parks, hotels and all applications where microphones need to be mixed with music (e.g. karaoke)
Power supply: |
230 V AC, 50 Hz |
Protection class: |
Protection class II |
Power connection: |
Power supply cord with Euro plug (provided) |
Frequency range: |
20 - 20000 Hz |
S/N ratio: |
>60 dB line
>70 dB phono |
THD: |
Line/phono <0,02 % at 1 kHz |
Gain: |
Microphone 52 dB
Line 17 dB
Phono 53 dB |
Housing color: |
Black |
Zone output: |
3 adjustable zones |
Control elements: |
Power switch, regular talkover, source selector |
Status LED: |
Signal, chanal level meter, master level meter, peak, chanal source; CUE, Talkover, ON AIR, Routing |
Connections: |
Input: Microphone via 2 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Input: line/phono via 2 x stereo RCA
Input: line via 8 x stereo RCA
Output: master via 3 x 3-pin XLR
Output: master via 3 x stereo RCA
Output: rec. via 2 x stereo RCA
Output: headphones via 1 x 6.3-mm-jack (bal.) |
Channels: |
Input chanel: 2 x stereo with Line-Line/Phono switch via RCA, channel control via fader, 3-band tone control EQ, Routing master bus switch, gain control, source selector, CUE switch
Input chanel: 3 x stereo with Line-line switch via RCA, channel control via fader, Routing master bus switch, gain control, source selector, CUE switch
Microphon chanal: 2 x mono via Combination socket (XLR/jack), channel control via Rotary dial, ON AIR switch, Routing master bus switch, Talkover switch,
Master output: 3 x stereo via XLR or RCA, channel control via Rotary dial, 3-band tone control EQ
Rec. output: 1 x stereo via RCA, Routing master bus switch,
Headphones output: 1 x stereo via Jack, channel control via Rotary dial, Cue-mix-function, |
Housing design: |
(19") 48.3 cm rack installation 2 U |
Dimensions: |
Width: 48,3 cm
Depth: 14,8 cm
Height: 8,9 cm |
Weight: |
3,10 kg |
|
Reviews
There are no reviews yet.