| Content |
Features At A Glance
Functions common to both the US-1x2
- Ultra-HDDA (High Definition Discrete Architecture) mic preamp with −125dBu EIN
- NE5532 op-amps used at the audio input and output stages
- Up to 96kHz/24-bit recording
- Support for Windows and Mac OS X operating systems
- USB 2.0 computer connection
- USB bus-powered for mobile recording
- Optional AC adaptor available for use with iOS devices
- Connect with iPads and other iOS devices
- +48V phantom power on microphone input
- Switchable 1/4" high-impedance input
- Microphone preamp gain range of 57 dB
- Direct monitoring function for zero-latency monitoring
- Tough all-metal casing for durability
- Angled design provides excellent usability on a desktop
- RCA output jacks suitable for connection to powered monitors
- Standard TRS headphones output jack
- Separate controls for line and headphones output volumes
- MIDI input and output via USB
- Input sound monitoring can be set to stereo or mono
- USB class compliant 2.0 support
- Confirmed operation with major DAW software (SONAR, ProTools, Cubase, Live, Studio One, Garage Band）
US-1X2 SPECIFICATIONS
| |
US-1x2 |
| Sampling frequency |
44.1k/48k/88.2k/96kHz |
| Quantization bit rate |
16/24bit |
| Analog audio inputs |
|
| MIC IN |
IN 1 |
| Connector |
XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED |
| Input impedance |
2.4k ohms |
| Nominal input level |
|
| GAIN:MAX |
-65dBu (0.0004Vrms) |
| GAIN:MIN |
-8dBu (0.3090Vrms) |
Maximum input level
(GAIN:MIN ) |
+8dBu (1.9467Vrms) |
| Gain |
57dB |
| INST IN |
IN 1 |
| Connector |
6.3mm(1/4“)TS-jack(T：HOT, S：GND), UNBALANCED
(When set to "INST" at MIC/LINE.INST switch) |
| Input impedance |
10k ohms |
| Nominal input level |
|
| GAIN:MAX |
-41dBV(0.0004Vrms) |
| GAIN:MIN |
-8dBV(1.9467Vrms) |
Maximum input level
(GAIN:MIN ) |
+10dBV(3.162Vrms) |
| Gain |
57dB |
| LINE IN |
|
| Connector |
6.3mm(1/4“)TRS-jack(T：HOT, R：COLD, S：GND), BALANCED
(When set to "MIC/LINE" at MIC/LINE.INST switch) |
| Input impedance |
10k ohms |
| Nominal input level |
|
| GAIN:MAX |
-41dBu(0.0069Vrms) |
| GAIN:MIN |
+4dBu(1.228Vrms) |
Maximum input level
(GAIN:MIN ) |
+20dBu(7.75Vrms) |
| Gain |
57dB |
| Analog audio outputs |
|
| LINE OUT |
|
| Connector |
RCA pin-jack Unbalanced |
| Output impedance |
100ohms |
| Maximum output level |
+6dBu (7.75Vrms) |
| PHONES |
|
| Connector |
6.3mm(1/4“) stereo phone jack |
| Maximum output level |
18mW+18mW or more
(THD+N 0.1% or less, 32ohms loaded) |
| MIDI IN / OUT |
|
| Connector |
Via USB |
| Format |
Standard MIDI format |
| USB |
|
| Connector |
USB B type 4-pin |
| Format |
USB2.0 HIGH SPEED |
| Power |
|
| When connected PC |
USB bus powered |
| When connected iOS |
AC Adapter
(TASCAM PS-P520, sold separately) |
| Power consumption |
2.5W |
| Dimensions |
146mm W x 55mm H x 120mm D
|
| Weight |
1.37lb (623g) |
| Operating temperature |
5 to 35˚C |
| Bundled software |
Steinberg Cubase LE
Steinberg Cubasis LE |
| Accessories |
USB cable, User\'s manual, warranty card |
| Audio performance |
| Frequency response |
|
| LINE OUT(BALANCED) |
|
| 44.1k/48k Hz |
20Hz to 20kHz, +0dB/-0.5dB |
| 88.2k/96k Hz |
20Hz to 40kHz, +0dB/-01.0dB |
| PHONES |
|
| 44.1k/48k Hz |
20Hz to 20kHz, +0dB/-1.0dB |
| 88.2k/96k Hz |
20Hz to 40kHz, +0dB/-3.0dB |
| THD |
0.006% or less |
| S/N ratio |
100dB or more |
| Crosstalk |
95dB or more |
| EIN |
-127dBu or less |
| Computer system requirements |
| Windows |
| OS |
Windows 7(32-bit SP1, 64-bit SP1), Windows 8.0(32-bit, 64-bit), Windows 8.1(32-bit, 64-bit)
* For further information of the latest OS version, please click here. |
| Compatible computers |
Windows-compatible computer with a USB 2.0 port |
| CPU type/speed |
Dual core/2 GHz or faster (x86) |
| Memory |
2GB or more |
| DRIVER |
ASIO2.0, WDM(MME) |
| Macintosh |
| OS |
OS X Mountain Lion(10.8), OS X Mavericks(10.9)
* For further information of the latest OS version, please click here. |
| Compatible computers |
Apple Macintosh computer with a USB 2.0 port |
| CPU type/speed |
Dual core/2 GHz or faster |
| Memory |
2GB or more |
| DRIVER |
Core Audio, Core MIDI |
| iOS |
| OS |
iOS 7
* For more information about the OS compatibility on each models, please here. |
| Portable 10-in/10-out compact, mobile FireWire audio at home or on the road
The FA-101 has the highest specs available to support your most demanding applications. You get 24-bit, 192kHz simultaneous recording and playback in a compact 1U half-rack unit, with all the headroom you need.
Supports up to 24 bit, 192 kHz
Compatible with Mac OS X standard driver
Two independent, on board mic pre-amps
Capable of full duplex recording and playback on 10 independent channels
Bus powered and durable metal construction for mobile applications
Lots of ins and outs to support a wide range of recording and gigging applications
The FA-101 is a feature-packed 10x10 audio interface that can handle a full 10 channels of input/output at 24-bit/96kHz. Record and monitor all 10 channels simultaneously in full duplex. Phenomenal audio power for the studio musician! In addition, the FA-101 offers 6-channel recording and playback at 24-bit/192kHz for performance at DVD-A quality.
* 10x10 24-bit/96kHz audio performance
* 6x6 24-bit/192kHz audio performance
* Firewire bus-powered
* Direct monitoring
* Low-latency driver support
* Native Support in Mac OS X (10.3.4 or later)
* 2x phantom-powered mic preamps
* 8x8 balanced analog I/O
* S/PDIF optical I/O
* MIDI I/O |
Equipped with the latest generation 24-bit, enhanced multi-bit 128x oversampling 192-kHz converters, the HD192 achieves a remarkable A-weighted signal-to-noise ratio of 120 dB with balanced XLR connectors throughout. Ideal for surround applications, the HD192's 12 inputs and 12 outputs can support two simultaneous 5.1 mixes. And the HD192 is full of advanced features, like AES/EBU I/O with sample rate conversion both in and out.
The PCI-424 card introduced with the 2408mk3 is 192-kHz ready. Just connect the HD192 expansion interface to record 192-kHz audio.
The HD192 can be purchased as an expander for an existing PCI-424-based MOTU Audio System, or as a core system which includes the PCI-424 card and Audiodesk workstation software.
|
Yamaha AUDIOGRAM3 Computer Recording System Specifications:
- Mic/Hi-Z input: 1
- Audio Format: USB AUDIO 1.1, 16bit/44.1kHz
- Combo Connectors: 1
- Stereo In connectors: Phone connector x 2 (L/MONO x 2, R x 2)
- USB Connector: To Host x 1
- Headphone connector: Stereo Phone connector x 1
- Stereo Out connector: Phone connector x 2 (L, R)
- Power Supply: USB powered
- Dimensions (W x H x D): 180 mm x 61 mm x 112 mm (7-1/8" x 2-3/8" x 4-3/8“)
- Accessories: CUBASE AI DVD, Owner's Manual, USB Cable
System Requirements - Windows Vista
- Windows-based computer with built-in USB interface
- OS: Windows Vista
- CPU: 1GHz or better Intel Core / Pentium / Celeron processor
- Memory: More than 1GB
Windows XP - Windows-based computer with built-in USB interface
- OS: Windows XP Professional / XP Home Edition
- CPU: 750MHz or better Intel Core / Pentium / Celeron processor
- Memory: More than 128MB
Macintosh - Macintosh computer with built-in USB interface
- OS: Mac OS X 10.3.3 or higher
- CPU: Intel CPU / Macintosh G3 processor 300 MHz or better
- Memory: More than 128MB
Cubase AI4 System Requirements:
- Windows
- OS: Windows XP Professional SP1 / XP Home Edition SP1 / Windows Vista (32-bit)
- CPU: Intel Pentium 1.4GHz or better
- Available Memory: More than 512MB
- Hard Disk: Free disk space of 1GB or more
- Audio Interface: Windows DirectX / ASIO compatible
Macintosh - OS: Mac OS X 10.4 or higher
- CPU: Power Mac G4 1GHz or Core Solo 1.5GHz or better
- Available Memory: More than 512MB
- Hard Disk: Free disk space of 1GB or more
|
Behringer UFO202 USB Audio Interface
The Behringer U-Phono UFO202 is a high-quality USB audio interface with built-in phono preamp and massive software package for digitalizing your tapes and vinyl records.
Features
- High-quality USB audio interface connects your turntable, cassette player, etc. with your computer for recording and playback
- Transfer and restore your valuable vinyl records and tapes to your computer via a simple USB connection
- Massive software bundle includes Audacity vinyl restoration, noise-reduction, editing and recording software, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
- Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
- Phono input switchable to line input source
- Stereo output allows easy connection and playback of computer audio files over your home sound system
- High-resolution 48 kHz converters for high-end audio quality
- Stereo Headphone output with dedicated Level control lets you monitor your input source
- Works with your PC or Mac computer -- no setup or drivers required
- Powered via USB--no external power supply needed
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Compact and Versatile
Equipped with RCA inputs and outputs, the U-Phono UFO202 can connect to a myriad of equipment such as tape decks, sound modules and active monitors, plus many more. Additionally, when you connect the UF202's outputs to your mixer's input channels, you have the ability to access EQ, Aux Sends and much more - allowing you to create extremely versatile mixes for your recording sessions.
48kHz Precision
The Behringer UFO202 provides pristine 48kHz resolution to ensure that your favourite vinyl records are recorded with the detail and quality your music deserves.
Audacity Audio Editor Software
The Behringer U-Phono UFO202 USB Audio Interface comes supplied with a free open source audio editor and multi-track recorder software - Audacity. Please visit the Behringer web page for download links here.
Specifications
- Input Connector: RCA, Unbalanced
- Input Impedance: Approx. 27kΩ
- Maximum Input Level: 2dBV
- Output Connector: RCA, Unbalanced
- Output Impedance: Approx. 400Ω
- Maximum Output Level: 2dBV
- Digital Output: Toslink, Optical
- Digital Output Format: S/PDIF
- USB: Type A
- Converter: 16-Bit
- Sample Rate: 32kHz, 44.1kHz, 48kHz
- Frequency Response: 10Hz - 20kHz ±1dB @ 44.1kHz Sample Rate
- 10Hz - 22kHz ±1dB @ 48kHz Sample Rate
- Crosstalk: -77dB @ 0dBV, 1kHz
- Power Supply: USB, 5V 100mA Maximum
- Dimensions: 0.87" x 3.46" x 2.36" / 22mm x 88mm x 60mm (H x W x D)
- Weight: 0.10kg
|
The FA-66 is a 6-channel portable FireWire audio interface designed with the mobile recording and performance professional in mind. The FA-66 offers incredible audio fidelity, stability, and a practical set of input and output options. It also offers two XLR/TRS combo inputs with phantom power, plus two RCA inputs, four balanced +4dBu outputs, optical S/PDIF I/O, a built-in analog limiter, zero-latency direct monitoring, solid metal construction, and FireWire bus power, all in a durable compact case.
* 6-in/6-out 24-bit/96kHz simultaneous performance
* 4-in/4-out 24-bit/192kHz simultaneous performance
* 2 XLR/TRS combo jacks w/premium phantom-powered mic preamps
* +4 dB balanced input and output
* S/PDIF optical input & output ports with Sync LED indicator
* MIDI in/out ports
* Built-in analog limiter and indicator
* FireWire bus powered
* AC adaptor included
* Mac OS X CoreAudio and Windows XP WDM and ASIO 2.0 support
* Zero-latency Direct Monitoring
* 6-pin and 4-pin IEEE1394 ports
* Compact, solid-metal construction |
Reviews
There are no reviews yet.