TASCAM DR-680 MKII Digital recorder

478.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Features at a glance SD/SDHC/SDXC cards used as recording/playback media 6 balanced mic/line inputs (1-4: XLR/TRS combo jacks, 5-6: TRS jacks) 6 unbalanced outputs (RCA pin jacks) COAXIAL digital input and output (S/PDIF, AES/EBU) Recording/playback formats: BWF, WAV, MP3 With BWF format, recording starting times can be stored in files 8-track recording at 96kHz/24-bit (BWF, […]

 

Read more

Features at a glance

  • SD/SDHC/SDXC cards used as recording/playback media
  • 6 balanced mic/line inputs (1-4: XLR/TRS combo jacks, 5-6: TRS jacks)
  • 6 unbalanced outputs (RCA pin jacks)
  • COAXIAL digital input and output (S/PDIF, AES/EBU)
  • Recording/playback formats: BWF, WAV, MP3
  • With BWF format, recording starting times can be stored in files
  • 8-track recording at 96kHz/24-bit (BWF, WAV)
  • 6 mic/line inputs and stereo mix recording or 6 mic/line input and digital stereo recording

  • Record MP3 files at 96, 128, 192 and 320 kbps
  • Record 4-channel MP3 files
  • From 4 mic/line inputs (XLR/TRS combo jacks) or 2 mic/line inputs and digital stereo inputs

  • 2-track recording at 24-bit/192kHz (BWF, WAV)
  • From 2 mic/line inputs or digital stereo inputs

  • Digital inputs and outputs support double speed 96 kHz and quad speed 192 kHz
  • Sampling frequencies
  • 44.1, 48, 96, 192 kHz (BWF, WAV) 44.1, 48 kHz (MP3)

  • Quantization bit depth: 16/24-bit (BWF, WAV)
  • 6 channels of TASCAM HDDA mic preamps for high audio quality with 48V phantom power
  • Limiter and low-cut filter available on each mic/line input
  • Built-in stereo monitoring mixer for headphone mix and/or recording
  • Dual-recording function allows two files to be recorded simultaneously at different levels
  • GANG function allows the input gain of multiple channels to be operated simultaneously
  • Pre-recording function allows the capture of audio two seconds before recording is started
  • Automatic-recording function can start and stop recording automatically in response to the input signal level (−48, −24, −12 or −6 dB)
  • Even when multiple tracks are used, all recordings made at the same time can be managed as a single take/file
  • Track incrementation allows a recording to be split by creating a new file at the desired point without interrupting recording
  • Up to 1000 takes and 5000 files can be recorded on a single card
  • Mark function can be used to move to specific points (up to 99 marks per take)
  • Wheel can be used to change the playback position
  • Repeat playback function
  • Panel lock function to prevent misoperation
  • Cascade function allows transport control of multiple DR-680MKII units using a master unit
  • File name format can be set to use a user-defined word or the date
  • High-speed transfer of files to a computer using USB 2.0
  • 128×64-dot matrix display with backlight
  • Built-in mono speaker with 500mW output
  • Headphone output and level control (50mW+50mW/ 32ohm)
  • Powered by 8 AA batteries or the included AC adapter
  • USB cable and shoulder strap included
  • Folding stand convenient for tabletop use
  • CS-DR680 carrying case (sold separately)
  • AR-DR680 case by Portabrace also available
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “TASCAM DR-680 MKII Digital recorder”

Your email address will not be published. Required fields are marked *

Quick Comparison

TASCAM DR-680 MKII Digital recorder removeTASCAM HD-R1 Professional CF-Card Recorder: Rackmounted removeTASCAM HS-P8 Portable Professional Recorder removeAPOGEE X-VID EXPANSION CARD FOR Video I/O for Big Ben removeFOSTEX UR-2 Professional Digital Recorder removeKurzweil KORE64 Expansion Card for PC3/PC3K remove
NameTASCAM DR-680 MKII Digital recorder removeTASCAM HD-R1 Professional CF-Card Recorder: Rackmounted removeTASCAM HS-P8 Portable Professional Recorder removeAPOGEE X-VID EXPANSION CARD FOR Video I/O for Big Ben removeFOSTEX UR-2 Professional Digital Recorder removeKurzweil KORE64 Expansion Card for PC3/PC3K remove
Image
SKUTAEM000517HD-R1HS-8X-VIDUR 2KORE64
Rating
Price 478.00 incl. GR VAT 1,225.89 incl. GR VAT 4,938.82 incl. GR VAT 462.73 incl. GR VAT 1,194.11 incl. GR VAT 156.00 incl. GR VAT
Stock

Available on backorder

Only 4 left in stock

In stock

In stock

Only 5 left in stock

Available on backorder

AvailabilityAvailable on backorderOnly 4 left in stockIn stockIn stockOnly 5 left in stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Features at a glance

  • SD/SDHC/SDXC cards used as recording/playback media
  • 6 balanced mic/line inputs (1-4: XLR/TRS combo jacks, 5-6: TRS jacks)
  • 6 unbalanced outputs (RCA pin jacks)
  • COAXIAL digital input and output (S/PDIF, AES/EBU)
  • Recording/playback formats: BWF, WAV, MP3
  • With BWF format, recording starting times can be stored in files
  • 8-track recording at 96kHz/24-bit (BWF, WAV)
  • 6 mic/line inputs and stereo mix recording or 6 mic/line input and digital stereo recording
  • Record MP3 files at 96, 128, 192 and 320 kbps
  • Record 4-channel MP3 files
  • From 4 mic/line inputs (XLR/TRS combo jacks) or 2 mic/line inputs and digital stereo inputs
  • 2-track recording at 24-bit/192kHz (BWF, WAV)
  • From 2 mic/line inputs or digital stereo inputs
  • Digital inputs and outputs support double speed 96 kHz and quad speed 192 kHz
  • Sampling frequencies
  • 44.1, 48, 96, 192 kHz (BWF, WAV) 44.1, 48 kHz (MP3)
  • Quantization bit depth: 16/24-bit (BWF, WAV)
  • 6 channels of TASCAM HDDA mic preamps for high audio quality with 48V phantom power
  • Limiter and low-cut filter available on each mic/line input
  • Built-in stereo monitoring mixer for headphone mix and/or recording
  • Dual-recording function allows two files to be recorded simultaneously at different levels
  • GANG function allows the input gain of multiple channels to be operated simultaneously
  • Pre-recording function allows the capture of audio two seconds before recording is started
  • Automatic-recording function can start and stop recording automatically in response to the input signal level (−48, −24, −12 or −6 dB)
  • Even when multiple tracks are used, all recordings made at the same time can be managed as a single take/file
  • Track incrementation allows a recording to be split by creating a new file at the desired point without interrupting recording
  • Up to 1000 takes and 5000 files can be recorded on a single card
  • Mark function can be used to move to specific points (up to 99 marks per take)
  • Wheel can be used to change the playback position
  • Repeat playback function
  • Panel lock function to prevent misoperation
  • Cascade function allows transport control of multiple DR-680MKII units using a master unit
  • File name format can be set to use a user-defined word or the date
  • High-speed transfer of files to a computer using USB 2.0
  • 128×64-dot matrix display with backlight
  • Built-in mono speaker with 500mW output
  • Headphone output and level control (50mW+50mW/ 32ohm)
  • Powered by 8 AA batteries or the included AC adapter
  • USB cable and shoulder strap included
  • Folding stand convenient for tabletop use
  • CS-DR680 carrying case (sold separately)
  • AR-DR680 case by Portabrace also available

The HD-R1 Solid State Recorder is a two-channel, single rack-mount recording and playback device created with the sound contractor in mind.

Utilizing the highly reliable Compact Flash Card the HD-R1 records 44.1 to 96kHz, 16/24 bit PCM or MP3 files. The ability to control the HD-R1 remotely is provided via RS-232, Parallel, and RJ45 100Mbit Ethernet. File transfer can be accomplished via Ethernet and/or USB (type "A" connector).

To further enhance the HD-R1's feature set, Mic preamps (w/20dB pad) and Phantom Power (rear-panel selectable) have been included. The HD-R1 offers a variety of contractor-friendly I/O options; such as, Unbalanced (RCA), Balanced (XLR and Euroblock), and S/PDIF Digital (Coaxial and Optical).

And of course... the traditional source device features are Power-on-Play, Front Panel Rotary Input Level Controls, Headphone Jack with level control, and a variety of Playback Modes.

    * 1U Rack-mount Solid-State Recorder
    * Compact Flash Card
    * USB host interface for USB Flash Cards
    * Audio data formats: PCM (16/24 bit), MP3
    * Sampling rates supported: 44.1, 48, 88.2, 96kHz
    * Mic/Line XLR (with 20dB pad) balanced I/O
    * Phantom Power (rear panel switch and front LED indicator)
    * Euroblock terminal (Input and Output)
    * Unbalanced RCA (Input and Output)
    * Front panel rotary input level controls
    * RS-232 interface for control

    * RJ45 100Mbit/s Ethernet interface for file transfer and control
    * 25-pin parallel remote control interface
    * 16 Direct Play via D=SUb25 pin parallel interface
    * Power on play (front panel selectable)
    * S/PDIF Digital In/Out (Coaxial and Optical)
    * Headphone Jack w/level control
    * Input through and Auto Fade function
    * Input monitoring / mixing of live stereo input along with playback
    * Program Play, Folder Play, Shuffle Play, Interval Play modes, etc...

Specifications
General
Recording media   CompactFlash (CF) card
File system   FAT32
Recording format   BWF (Monophonic, Polyphonic)
Number of channels   8 channels (44.1/48/88.2/96 kHz)
8 channels + stereo mix (44.1/48 kHz)
4 channels (176.4/192 kHz)
Quantization bit rate   16/24 bit
Sampling frequency   44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up)
Reference clock   Internal, Word In, Video In, Digital In (AES 1-8 IN, AES A-BIN, ADAT 1-8 IN)
Type of timecode frame   23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF
Limiter   Attack time: 3 ms
Release time: 300 ms
Threshold: –5 dBFS
Ratio: 32:1
Analogue audio inputs and outputs
The error for nominal and maximum levels is ±1dB for all input and output jacks except the PHONES jack.
ANALOG INPUT (1-8)   D-sub 25-pin
Input impedance   10 kOhm
Nominal input level   When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms)
Maximum input level (selectable)   +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms)
ANALOG INPUT (L/A, R/B)   XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance   10 kOhm
Nominal input level   When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms)
Maximum input level (selectable)   +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms)
ANALOG OUTPUT (1-8)   D-sub, 25-pin
Output impedance   100 Ohm
Nominal output level   When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms)
Maximum output level (selectable)   +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms)
ANALOG OUTPUT (A/B)   XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance   100 Ohm
Nominal output level   When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms)
Maximum output level (selectable)   +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms)
PHONES connector   6.3-mm standard stereo jack
Maximum output power   45 mW + 45 mW or more (THD+N 0.1 % or less, into 32 Ohm)
Digital audio inputs and outputs
DIGITAL IN/OUT (AES/EBU)   D-sub, 25-pin
Minimum input voltage   2 Vpp
Maximum input voltage   7 Vpp
Output voltage   2–5 Vpp
Format   AES3-2003/IEC 60958-4 (AES/EBU)
DIGITAL I/O (ADAT)   ADAT optical
Format   ADAT
DIGITAL INPUT A-B   XLR-3-31
Input voltage   2–7 Vpp at 110 Ohm
Format   AES3-2003 (AES/EBU)
DIGITAL OUTPUT L-R   XLR-3-32
Output voltage   2–5 Vpp at 110 Ohm
Format   AES3-2003 (AES/EBU)
Other inputs and outputs
RS-422   D-sub, 9-pin
RS-232C   D-sub, 9-pin
PARALLEL   D-sub, 25-pin
CASCADE IN   BNC
Input voltage   TTL equivalent (5 V)
Input impedance   75 Ohm ±10 %
Allowable frequency deviation of external synchronization: ± 100 ppm
CASCADE OUT   BNC
Output voltage   TTL equivalent (5 V)
Output impedance   75 Ohm ±10 %
Sampling frequency   44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up)
TIME CODE IN   BNC
Input voltage   0.5–5 Vpp
Input impedance   20 kOhm
TIME CODE OUT   BNC
Output voltage   2–5 Vpp
Output impedance   600 Ohm ±10
WORD/VIDEO IN   BNC
Input voltage   TTL equivalent (5 V)
Input impedance   75 Ohm ±10 %
Allowable frequency deviation of external synchronization: ± 100 ppm
WORD/VIDEO THRU/OUT   BNC
OUT/THRU switch included (OUT is for WORD OUT only)
Output voltage   TTL equivalent (5 V)
Output impedance   75 Ohm ±10 %
Sampling frequency (when using WORD)   44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up)
ETHERNET   RJ45
Keyboard   Mini-DIN (PS/2)
USB   USB A-type, 4-pin
Protocol   USB2.0 HIGH SPEED (480 Mbit/s)
Audio performance (analogue input to analogue outp
Frequency response  
20 Hz - 20 kHz   ±0,5 dB (all sampling rates)
at 40 kHz   +0,5 dB/–2 dB (Fs = 88.2/96 kHz)
at 80 kHz   +0,5 dB/–5 dB (Fs = 176.4/192 kHz)
Distortion   ≤0.005% (Reference level: –20 dB, input level: +23 dBu, 1 kHz, AES-17LPF)
S/N ratio   ≥100 dB(A) (22 kHz LPF)
Power requirements and other specifications
Power requirements   100–240 V AC, 50–60 Hz
Power consumption   26 W
Dimensions (W x H x D)   483 mm x 88 mm x 288 mm
Weight   4.8 kg
Operating temperature range   5–35 °C

The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.

The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal


•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal

•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently

 

Features
  • Support for PAL, NTSC and 60 Hz B&W standards
  • One composite video input and three composite video outputs
  • Can operate as a master black-burst generator
  • Can operate as genlocking slave device

 

Stereo Rack Memory Recorder
The UR-2 is a 1 U rack size stereo audio recorder using SD card and USB storage device that is flexibly adapting to the wide variety of playback requirements.
The UR-2 is a new generation stereo memory recorder from Fostex that uses 2 SD cards (SDHC compatible) and USB storage device as the recording media. The recording/ playback file format is BWF (WAV). Its ample playback functions will adapt to the wide variety of playback requirements. It offers high quality recording of up to 24bit/96kHz (in BWF format). Employing FAT 32 disc format, it is easy to process the file transfer to a PC based DAW.
The analog input and output are balanced XLR/+4dBu and un-balanced RCA/-10dBV, the digital input and output complies to AES/EBU and S/P DIF digital signal. It is flexible to be used in the available audio system. The playback function includes Chain Play and Timer Play, it is suitable for live stage performance and sound installation. In addition to the external control via parallel remote with D-Sub 25pin and RS-232C serial remote, a USB keyboard and 10-key keyboard can trigger the instant playback start, which is very useful at a live event, theater and broadcast environments.
The Mic input located on the front panel offers 48V phantom power, it can be used not only for recording but also for speech to be mixed with playback source. Last but not least, its newly employed organic EL display gives an extremely clear visibility. This combined with DC power operation, it serves for outdoor use very well.

MAIN FEATURES
• 2 sets SD card slots and a USB host connector for alternate recording/playback among the different media.
• Stereo or Mono WAV (BWF) recording to SD card (also SDHC) and USB storage device
• Fs: 44.1/48/88.2/96kHz, Quantization: 16/24bit
• High speed file transfer with PC via USB 2.0 (bi-directional)
• Employing FAT32 format, it allows to directly mount the recorded files to PC.
• It adapts to a wide variety of use environment by offering Chain Play and Memory Play.
• Timer Play and Power ON Play enable automatic playback start for such as chime and repetitive announcement, which are convenient in the installation audio industry.
• The play mode list employs CSV file format so that it is easy to edit by a text editor or spread sheet program software on PC.
• 99 Cue points with locate function. Waveform display under Scrub mode offers easy and visual Cue point setting
• Microphone input with P48V available on the front panel. Not only for recording but for speech to be mixed with playback source.
• Analog I/O with balanced XLR and un-balanced RCA pin jacks, Digital I/O with XLR connectors
• An organic EL display offers high visibility.
• Remote transport control via Foot SW, Parallel remote pot (Dsub 25pin) and RS-232C (D-sub 9pin)
• External USB keyboard can be used not only for file name editing but for transport control such as REC and PLAY.


The KORE 64™ ROM option represents a complete expansion and reimagining of the PC3 and PC3K's sonic potential (not for the PC3LE). Pushing the limits of V.A.S.T. synthesis for both realistic and experimental electronic sounds, KORE 64™ adds over 300 new programs, including stunning new Synths, Electric Guitars, Horns, Drums and Percussion. With KORE 64™ installed, the PC3/K built-in program library now totals over 1400 presets!


    New Setups:

        50 new setups featuring the KORE 64™ sounds.
        Over 200 new drum grooves in multiple styles.
        New Dance and Hip Hop setups for triggering and controlling beats in real time.

    New Synths:

        New samples modeled after the Oberheim SEM, ARP Chroma, TX802, CZ1, and dozens of legacy waveforms from the K series.
        Over 100 new synth programs.
        Sounds for popular electronic music styles like House, Trance, Dubstep, Drum&Bass, Glitch, Electro Hip Hop, and more.
        More real time controls, beat-synced modulations and envelope control transform sounds without hitting the edit button.
        Atmospheric and cycling pads voiced for performing, producing, and scoring.

    New Guitars:

        New samples modeled after the Gibson Les Paul and Fender Stratocaster.
        Palm muted and sustained articulations playable in a picked or legato style.
        Instant-shredder arpeggiator patterns, whammy bar effects, and realistic feedback emulations.
        Preset sounds from Rock, Country, Rock-a-Billy, Metal, Funk, and more.

    New Brass/Woodwinds:

        New alto sax, tenor sax, baritone sax, trumpet, and trombone samples.
        New programs include solo instruments and custom sections with many combinations of the different instruments.
        Articulate with pressure on several new programs.
        Sections cover styles from Big Band, Soul, Funk, Latin, R&B, Hip Hop, Rock and more.

    New Drums

        Drums from Yamaha, Ludwig, Pearl, DW, Rogers, and Gretsch recorded as full kits.
        Full cymbal arrays recorded with Zildjian, Paiste, and Sabian cymbals.
        72 new Drum Kits and 62 percussion instruments and templates.
        10 times the samples and 30 times the data of the existing PC3/PC3K Drums.
        All drum kits have mixer functioning on the sliders to change the level the kick, snare, toms, hats, and percussion independently.
        Unsurpassed realism and playability for sampled drums.
        Full complement of Electronic and Processed Drum samples.
        Scratches, hits and Industrial Sounds.
        Wide variety of traditional and processed Percussion sounds.

Download the full preset Objects List under the Downloads section

User Installable.

Requires:  PC3K OS v2.20 or better
                  PC3 OS v2.20 or better

All specifications subject to change without notice.

Weight1.00 kg4.00 kg4.80 kg0.30 kg3.00 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 4.00 kg
Weight 4.80 kg
Weight 0.30 kg
Weight 3.00 kg
Weight 0.30 kg