TASCAM TM-80 Condenser Microphone

78.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are […]

 

Read more

TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality.

Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.

  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 – 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)

TM-80 SPECIFICATIONS

  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 – 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “TASCAM TM-80 Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

TASCAM TM-80 Condenser Microphone removeBEHRINGER C-2 - 2 Matched Studio Condenser Microphones removeNEUMANN U-87 Ai Studio Set Condenser studio microphone removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz removeNEUMANN TLM-103 Condenser studio microphone removeAKG C-214 Condenser Microphone remove
NameTASCAM TM-80 Condenser Microphone removeBEHRINGER C-2 - 2 Matched Studio Condenser Microphones removeNEUMANN U-87 Ai Studio Set Condenser studio microphone removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz removeNEUMANN TLM-103 Condenser studio microphone removeAKG C-214 Condenser Microphone remove
Image
SKUTA/EM/000436E005251H11NE00046KSM44SLH11NE00039C 214
Rating
Price 78.00 incl. GR VAT67.00 incl. GR VAT 2,849.00 incl. GR VAT 938.00 incl. GR VAT 1,169.00 incl. GR VAT 408.00 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock

In stock

In stock

In stock

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)In stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentTASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.
  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 - 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
TM-80 SPECIFICATIONS
  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 - 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
Behringer C-2 2 Matched Studio Condenser Microphones 2 Matched Studio Condenser Microphones
  • 2 matched condenser microphones for stereo studio recording and live applications
  • Ideal as main and support microphones for studio and live applications
  • Cardioid pickup pattern for effective feedback elimination
  • Low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction
  • Switchable low-frequency roll-off and input attenuation
  • Ultra low-noise transformerless FET input eliminates low-frequency distortion
Excellent Source Isolation Our C-2 mics also feature a low-frequency rolloff switch to eliminate infrasonics (mic handling noise, sound created by creaky stages), as well as a switchable -10 dB input pad to accommodate hot signals, such as a really loud vocalist or overzealous cellist. The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-2 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics with a maximum sound pressure level of 136 dB. So even if the featured performer at your next recording session or live show happens to be a revved-up jet engine, this workhorse mic will not distort! Sound That Astounds Every stitch of these mics is designed to deliver beautiful sound. Beginning with the gold-plated 3-pin XLR connector, you get the highest signal integrity. Once connected to your system, youʼll notice these twin pro-caliber microphones have a 4 dB boost in the 1 kHz - 8 kHz range. For those of you new to condenser mics, this basically means youʼll get a slightly brighter sound that will give the perfect shape to cymbals and overhead miking. Acoustic pianos and choirs also benefit greatly from this type of frequency response. Excellent Source Isolation The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-2 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics with a maximum sound pressure level of 136 dB. So even if the featured performer at your next recording session or live show happens to be a revved-up jet engine, this workhorse mic will not distort! Our C-2 mics also feature a low-frequency rolloff switch to eliminate infrasonics (mic handling noise, sound created by creaky stages), as well as a switchable -10 dB input pad to accommodate hot signals, such as a really loud vocalist or overzealous cellist. You Are Covered We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world. As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.
Variable large diaphragm microphone
Pressure-gradient transducer with double membrane capsule
The studio microphone classic
Three directional characteristics: omni, cardioid, figure-8
Switchable low frequency roll-off
Switchable 10 dB pre-attenuation

Ideal as main and as support microphone in the most differing recording situations

 

Acoustical operating principle Pressure gradient transducer
Directional pattern Omnidirectional, cardioid, figure-8 plus
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm 20/28/22 mV/Pa1)
Rated impedance 200 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR2) 26/23/25 dB1)
Equivalent noise level, A-weighted2) 15/12/14 dB-A1)
Signal-to-noise ratio, CCIR2) (rel. 94 dB SPL) 68/71/69 dB1)
Signal-to-noise ratio, A-weighted2) (rel. 94 dB SPL) 79/82/80 dB1)
Maximum SPL for THD 0.5%3) 117 dB (cardioid)
Maximum SPL for THD 0.5% with preattenuation3) 127 dB
Maximum output voltage 390 mV
Dynamic range of the microphone amplifier (A-weighted) 105 dB
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 0.8 mA
Matching connectors XLR3F
Weight 500 g
Diameter 56 mm
Length 200 mm

 

KSM44A Multi-Pattern Dual Diaphragm Microphone Premium microphone with three polar pattern options (cardioid, omnidirectional, bidirectional).

Features

  • Prethos® Advanced Preamplifier Technology: Class A, discrete, transformerless preamplifier provides  transparency, extremely fast transient response and no crossover distortion. Minimizes harmonic and intermodulation distortions.  
  • Groundbreaking specifications: 4dB of self-noise and max SPL of 131 dB for a total dynamic range of 127 dB – an increase of 7 dB that defines the new standard for cleanly nuanced audio capture
  • Multiple polar patterns–cardioid, omnidirectional and bidirectional–for maximum flexibility in a wide variety of recording applications
  • Dual 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass diaphragms provide superior frequency response
  • Premium electronic components and gold-plated internal and external connectors
  • Subsonic filter eliminates rumble from mechanical vibration below 17 Hz.
  • Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
  • 3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect
  • Integrated three-stage "pop” protection grille reduces plosives and other breath noise

    Type Condenser (externally biased)
    Frequency Response 20 to 20,000 Hz
    Polar Pattern Cardioid, Omnidirectional, Bidirectional
    lmpedance 50 ohms
    Phantom power required? 11–52 V DC phantom power (IEC-61938) 5.8 mA, maximum


Large diaphragm cardioid microphone
Pressure gradient transducer with with one-diaphragm capsule
Transformerless circuitry
Extremely low noise: 7 dB-A
Includes swivel mount
Straightforward handling for homerecording and professional studios

High-quality professional equipment for limited budgets

Acoustical operating principle Pressure gradient transducer
Directional pattern Cardioid
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm 23 mV/Pa
Rated impedance 50 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR1) 17.5 dB
Equivalent noise level, A-weighted1) 7 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 76.5 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 87 dB
Maximum SPL for THD 0.5%2) 138 dB
Maximum output voltage 13 dBu
Dynamic range of the microphone amplifier (A-weighted) 131 dB
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 3 mA
Matching connector XLR3F
Weight approx. 450 g
Diameter 60 mm
Length 132 mm

 

AKG C214 – large 1” diaphragm microphone with cardioid polar pattern, frequency response: 20Hz-20kHz, 20dB pad, requires phantom power (12-52V), XLR connector. Includes clip, case and windshield. Dimensions: 160 x 55mm. Weight: 280g, optional microphone holder SA61 The C214 professional large-diaphragm condenser microphone has been designed as a cost-effective alternative to the high-end C414 family. Like the C414, the C214 offers a supreme one-inch capsule on an integrated suspension to reduce mechanical noise. A switchable 20dB attenuation pad allows recording of loud sources of up to 156dB SPL. A switchable bass-cut filter allows close-up recording with almost no proximity effect. The C214 captures sound by combining one capsule of the legendary C414 dual-capsule system and the patented AKG Back-Plate Technology, resulting in an outstanding performance close to the famous C414 XLII. Sonic character of the C414 XLII for beautifully detailed recording of lead vocals and solo instruments Outstanding dynamic range and ultralow noise for close-up recording of high-output sources of up to 156dB SPL Switchable 20dB attenuator and bass-cut filter for close-up recording and reduction of proximity effect Integrated suspension to reduce mechanical noise and vibration from stage Roadworthy design all-metal die-cast body with shock- and scratch-resistant finish
Weight2.50 kg0.90 kg2.00 kg1.00 kg3.00 kg0.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.50 kg
Weight 0.90 kg
Weight 2.00 kg
Weight 1.00 kg
Weight 3.00 kg
Weight 0.40 kg