TASCAM TM-80 Condenser Microphone

78.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are […]

 

Read more

TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality.

Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.

  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 – 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)

TM-80 SPECIFICATIONS

  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 – 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “TASCAM TM-80 Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

TASCAM TM-80 Condenser Microphone removeNEUMANN M-147 TUBE Condenser Cardiodic Microphone removeAKG PERCEPTION 420 large-diaphragm condenser microphone removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz removeAKG C414-XLS - Large Diaphragm Condenser Microphone with Five P removeBEHRINGER C-2 - 2 Matched Studio Condenser Microphones remove
NameTASCAM TM-80 Condenser Microphone removeNEUMANN M-147 TUBE Condenser Cardiodic Microphone removeAKG PERCEPTION 420 large-diaphragm condenser microphone removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz removeAKG C414-XLS - Large Diaphragm Condenser Microphone with Five P removeBEHRINGER C-2 - 2 Matched Studio Condenser Microphones remove
Image
SKUTA/EM/000436H11NE00019PERCEPTION 420KSM44SLC414-XLSE005251
Rating
Price 78.00 incl. GR VAT 2,959.00 incl. GR VAT 222.00 incl. GR VAT 938.00 incl. GR VAT1,116.00 incl. GR VAT67.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 1 left in stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderOnly 1 left in stockIn stockAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentTASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.
  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 - 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
TM-80 SPECIFICATIONS
  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 - 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
Acoustical operating principlePressure gradient transducer
Directional patternCardioid
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm20 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent SPL CCIR 468-324 dB
Equivalent SPL DIN/IEC 65112 dB-A
S/N ratio CCIR 468-370 dB
S/N ratio DIN/IEC 65182 dB
Maximum SPL114 dB for THD
Maximum output voltage8 dBu
Dyn. range of the mic. amplifier DIN/IEC 651102 dB for THD
Supply voltagePower supply N 149 A
Matching connectorMicrophone: DIN 8F, Power Supply: XLR 3F
Weight460 g
Diameter57 mm
Length142 mm
A/B, X/Y, and M/S stereo recording Ambience recording Grand piano, woodwind and brass instruments Percussions Drums Classical music recording Studio applications
  • Back-to-back large-diaphragm multi-pattern transducer
  • True condenser technology
  • High sensitivity and 155 dB maximum SPL capability
  • Switchable 20 dB preattenuation pad
  • Switchable bass cut filter
  • Legendary, pristine AKG sound quality
  • Complete with spider-type shock mount and aluminium carrying case
Type Dual-capsule,1-inch large-diaphragm, true condenser pressure-gradient microphone
Polar pattern Cardioid, omnidirectional, figure-eight
Frequency range 20 to 20,000 Hz
Sensitivity 28 mV/Pa (-31 dBV)
Max. SPL 135/155 dB SPL (0/-20 dB) for 0.5% THD
Equivalent noise level 16 dB-A (IEC 60268-4)
Signal/noise ratio (A-weighted) 78 dB
Preattenuation pad 0 dB, -20 dB
Bass filter 12 dB/octave, 300 Hz
Impedance =1000 ohms
Current consumption

KSM44A Multi-Pattern Dual Diaphragm Microphone Premium microphone with three polar pattern options (cardioid, omnidirectional, bidirectional).

Features

  • Prethos® Advanced Preamplifier Technology: Class A, discrete, transformerless preamplifier provides  transparency, extremely fast transient response and no crossover distortion. Minimizes harmonic and intermodulation distortions.  
  • Groundbreaking specifications: 4dB of self-noise and max SPL of 131 dB for a total dynamic range of 127 dB – an increase of 7 dB that defines the new standard for cleanly nuanced audio capture
  • Multiple polar patterns–cardioid, omnidirectional and bidirectional–for maximum flexibility in a wide variety of recording applications
  • Dual 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass diaphragms provide superior frequency response
  • Premium electronic components and gold-plated internal and external connectors
  • Subsonic filter eliminates rumble from mechanical vibration below 17 Hz.
  • Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
  • 3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect
  • Integrated three-stage "pop” protection grille reduces plosives and other breath noise

    Type Condenser (externally biased)
    Frequency Response 20 to 20,000 Hz
    Polar Pattern Cardioid, Omnidirectional, Bidirectional
    lmpedance 50 ohms
    Phantom power required? 11–52 V DC phantom power (IEC-61938) 5.8 mA, maximum


The C 414 B/XLS has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. The C 414B/XLS is designed to deliver accurate pickup of all acoustic instruments and voices. The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid, wide cardioid, hypercardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6 dB, -12 dB and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414 B/XLS has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6-dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A. The C 414 B/XLS has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems. It comes complete in an all-metal road case with the AKG H-85 shock mount, a PF80 external two-stage pop filter, a W414X external windscreen and an individually-measured chart showing the response curve of the microphone. It is also available in factory-matched stereo pairs packaged with a H50 stereo bar instead of the external pop filter. The C 414B/XLS is built in Vienna, Austria and comes with a three-year limited parts and labor warranty. Features High sensitivity and extremely low self noise Five switchable polar patterns for placement and application flexibility Two-color LEDs provide quick visual indication of selected polar pattern and output overload Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration H 85 professional shock mount/stand adapter, PF 80 external pop filter and W 414 X external windscreen High sound pressure level capability and wide dynamic range Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions Optional R 414 remote control unit (available by the end of 2004) offers full control of all switchable parameters via standard microphone cable and 3-pin XLR-type connectors Specifications Type: 1" large diaphragm pressure gradient microphone Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight Frequency Range: 20 to 20,000 Hz Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB) Preattenuation Pad: -6, -12,-18 dB, switchable Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz Power Requirements: 48 V phantom power to DIN/IEC Connector: 3-pin XLR Dimensions: 2" x 1.5" x 6.3“ Net Weight: 10.6 oz Shipping Weight: 5 lbs (2.27 kg)Behringer C-2 2 Matched Studio Condenser Microphones 2 Matched Studio Condenser Microphones
  • 2 matched condenser microphones for stereo studio recording and live applications
  • Ideal as main and support microphones for studio and live applications
  • Cardioid pickup pattern for effective feedback elimination
  • Low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction
  • Switchable low-frequency roll-off and input attenuation
  • Ultra low-noise transformerless FET input eliminates low-frequency distortion
Excellent Source Isolation Our C-2 mics also feature a low-frequency rolloff switch to eliminate infrasonics (mic handling noise, sound created by creaky stages), as well as a switchable -10 dB input pad to accommodate hot signals, such as a really loud vocalist or overzealous cellist. The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-2 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics with a maximum sound pressure level of 136 dB. So even if the featured performer at your next recording session or live show happens to be a revved-up jet engine, this workhorse mic will not distort! Sound That Astounds Every stitch of these mics is designed to deliver beautiful sound. Beginning with the gold-plated 3-pin XLR connector, you get the highest signal integrity. Once connected to your system, youʼll notice these twin pro-caliber microphones have a 4 dB boost in the 1 kHz - 8 kHz range. For those of you new to condenser mics, this basically means youʼll get a slightly brighter sound that will give the perfect shape to cymbals and overhead miking. Acoustic pianos and choirs also benefit greatly from this type of frequency response. Excellent Source Isolation The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-2 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics with a maximum sound pressure level of 136 dB. So even if the featured performer at your next recording session or live show happens to be a revved-up jet engine, this workhorse mic will not distort! Our C-2 mics also feature a low-frequency rolloff switch to eliminate infrasonics (mic handling noise, sound created by creaky stages), as well as a switchable -10 dB input pad to accommodate hot signals, such as a really loud vocalist or overzealous cellist. You Are Covered We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world. As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.
Weight2.50 kg0.46 kg2.00 kg1.00 kg2.27 kg0.90 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.50 kg
Weight 0.46 kg
Weight 2.00 kg
Weight 1.00 kg
Weight 2.27 kg
Weight 0.90 kg