TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are […]
TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality.
Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 – 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
TM-80 SPECIFICATIONS
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 – 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
Weight
2.50 kg
Reviews
There are no reviews yet.
Be the first to review “TASCAM TM-80 Condenser Microphone” Cancel reply
TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality.
Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 - 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
TM-80 SPECIFICATIONS
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 - 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.
Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
Large 1" (25mm) capsule with gold plated diaphragm
Cardioid polar pattern
Self noise of only 5dB (A)
Ultra low noise, transformerless surface mount circuitry
Behringer B-5 Sputtered Diaphragm Studio Condenser Microphone
The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring two interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low frequency distortion. The -10 dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The microphone is delivered in a rugged hard case with stand adapter and windscreen.
Professional true condenser microphone for studio and live applications
2 interchangeable capsules with cardioid and omnidirectional pickup patterns
Low-mass gold sputtered diaphragm for ultimate sound reproduction
Perfect for acoustic instruments, voice and overhead etc.
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Smooth, super-wide frequency response and incredible musicality
Switchable low-frequency roll-off and -10 dB input attenuation
Gold-plated 3-pin XLR output connector
Rugged construction with satin nickel-plated brass body
Custom microphone stand adapter, windscreen and transport case included
Manual Download
Behringer C-1 Studio Condenser Microphone
Behringer C-1 Studio Condenser Microphone
The C-1 Studio Condenser Microphone from Behringer offers a cardioid pickup pattern for maximum sound source separation and feedback rejection. This low noise microphone is suitable for a wide range of recording scenarios, including project, professional, and home studio applications. There is a pressure gradient transducer and a shock-mounted large diaphragm capsule for open, transparent sound with high-quality transient response. It is constructed of a die-cast metal body for durability and features an LED light to indicate when the microphone is receiving phantom power. The C-1 includes a swivel mount and custom case.
Professional large-diaphragm condenser microphone for unsurpassed audio quality
Ideal as main and support microphone for studio and live applications
Exceptionally flat frequency response and ultra-high sound resolution
Cardioid pickup pattern for outstanding sound source separation and feedback rejection
Ultra low-noise transformerless FET input circuitry
LED indicates phantom power operation
Gold-plated 3-pin XLR output connector for perfect signal transmission
Ultra-rugged construction with die-cast body
Swivel stand mount and carrying case included
Operating Principle
Pressure Gradient
Capsule
Condenser
Diaphragm
0.63" / 16.0 mm
Polar Pattern
Cardioid
Performance
Frequency Range
40 Hz to 20 kHz
Maximum SPL
136 dB SPL
Impedance
100 Ohms
Load Impedance
1000 Ohms
Sensitivity
-33 dB
THD
1%
Connectivity
Output Connectors (Analog)
1 x XLR 3-Pin
Power
Operating Voltage
36 to 52 V
Operating Current Consumption
2.5 µA
Physical
0.93 lb / 0.42 kg
Dimensions
ø: 2.13 x L: 7.09" / ø: 54 x L: 180 mm
Weight
Acoustical operating principle
Pressure gradient transducer
Directional pattern
Cardioid
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohms
18 mV/Pa
Rated impedance
50 ohms
Rated load impedance
1000 ohms
Equivalent SPL CCIR 468-3
21 dB
Equivalent SPL DIN/IEC 651
10 dB-A
S/N ratio CCIR 468-3
73 dB
S/N ratio DIN/IEC 651
84 dB
Maximum SPL for THD 0.5%
140 dB
Maximum output voltage
13 dBu
Dynamic range of the microphone amplifier DIN/IEC 651
130 dB
Supply voltage
48 V ± 4 V
Current consumption
3 mA
Matching connectors
XLR 3F
Weight
480 g
Diameter
49 mm
Length
175 mm
The C 414 B/XLS has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. The C 414B/XLS is designed to deliver accurate pickup of all acoustic instruments and voices.
The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid, wide cardioid, hypercardioid and figure-eight patterns.
The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds.
On the rear of the microphone, an electronic switch allows the selection of -6 dB, -12 dB and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414 B/XLS has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6-dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.
The C 414 B/XLS has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems. It comes complete in an all-metal road case with the AKG H-85 shock mount, a PF80 external two-stage pop filter, a W414X external windscreen and an individually-measured chart showing the response curve of the microphone. It is also available in factory-matched stereo pairs packaged with a H50 stereo bar instead of the external pop filter.
The C 414B/XLS is built in Vienna, Austria and comes with a three-year limited parts and labor warranty.
Features
High sensitivity and extremely low self noise
Five switchable polar patterns for placement and application flexibility
Two-color LEDs provide quick visual indication of selected polar pattern and output overload
Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
H 85 professional shock mount/stand adapter, PF 80 external pop filter and W 414 X external windscreen
High sound pressure level capability and wide dynamic range
Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions
Optional R 414 remote control unit (available by the end of 2004) offers full control of all switchable parameters via standard microphone cable and 3-pin XLR-type connectors
Specifications
Type: 1" large diaphragm pressure gradient microphone
Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Frequency Range: 20 to 20,000 Hz
Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
Preattenuation Pad: -6, -12,-18 dB, switchable
Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Power Requirements: 48 V phantom power to DIN/IEC
Connector: 3-pin XLR
Dimensions: 2" x 1.5" x 6.3“
Net Weight: 10.6 oz
Shipping Weight: 5 lbs (2.27 kg)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.